Counting matching models…
Full crown, or split pieces for no-supports printing. Use settings of your choice for your desired filament. For the split_top printing (llama's head), place on build plate so mouth points up, and use max fan for the steep overhang on the…
Simple print of a mini book for my mini bookshelf (find the stl on my page). Flat bottom for better adhesion and support free print (Print standing up). Should print without a brim, but add one if your printer needs it. 15% infill, and…
Wife wanted me to make her a mini bookshelf for decoration to display mini versions of books shes reading w/ her book club. Including the plain and spider-web version, and STEP file to add any SVG decoration yourself (recommend 1.4mm…
Originally designed for my wife who wanted a coffin shaped Zen Garden. Easy to print in two separate pieces (box and lid). Standard settings are sufficient at 0.2mm layer height.
10 round speedloader for both standard metal and polymer magazines, and an original length version for polymer magazines. Also, an added “Pusher” for easier sliding of rounds. The pusher works for both long and short versions. I…
High quality lithophane of the famous painting “The Great Wave off Kanagawa." Built-in arc to allow for printing vertically for best quality. Print at 0.16mm layer height, 99% rectilinear infill, 12 vertical shells, keep print speeds low…
Quick no supports print. Print flat face on bed, 0.2mm layer height, standard PLA settings. Use brim if your adhesion is not great. Should be snug fit, just be sure to align the flats of the hex to the flats inside the knob.
Easy spacer that sits under the TFRP pedals to keep from scratching your walls when engaging pedals/brakes. Printed in PLA, 20% infill w/ standard settings. Easy print, easy fix.
Simple design requested by my wife. Holds your page, and your glasses. Easy to print and no supports required. Can be printed in any orientation, any layer height.
Simple design. Print flat face to the plate. No supports needed. Use brim if your adhesion isn't great. 0.2mm layer height, w/ standard PLA settings. Should be a snug fit, just make sure to align the flats of the allen key hole on the…
Snap in clip to repair broken vertical blinds. Requires drilling of two small holes, roughly 2mm wide. Printed in PLA at 100% (less than 10 mins to print on standard settings for ender 3 pro, with 0.4mm nozzle, 0.2mm layer height, 4-5…
Tool Box Handle Cap for US General (Harbor Freight) 30 inch carts. Intended for printing in TPU for a squeeze-in fit. Included STEP file as well for mod/resizing if printing in other filaments. Print at 100% infill, 8 walls
Quick and simple print. Any layer height will work.
Replacement locking plate for MFT 5.56 magazines. Simple print, no supports required. Recommend PLA+ or stronger materials, 0.2 (or 0.16) layer height, 8 Walls (Perimeters), 25-50 % infill (Grid).
Replacement for those Kroil lids that wear out and keep falling off. This locks in place. Don't grip too tight when removing, it requires a gentle pull. A tight grip causes the locking lip to engage more. Print at 100% infill in desired…
Replacement latch for generic crowsfoot wrench set found on Amazon. See pictures included to see if this can work for yours! Print in petg/nylon for best strength/heat resistance and 100% infill.
These are all currently available results.
