Counting matching models…
This is a remix of the “Prusa Saptula Printables - sample model.” by Prusa Research. I added 4 changes to the original. Changes I made: 1. I added on the underside a pattern so the spatula can wipe the printer nozzle to pull off strings…
Please check your slicer's Slice gap closing radius!!! PlanetaryBearing_OD64_ID22_H10_S25P11x8R47_b30_e0.1 OD: 64mm ID: 22 Height: 10mm I recommend to print with regular PLA Silk PLA is a very difficult material choice for this part. Some…
This is a customized watering bottle cap that prints in place with no support from the build plate. The water spraying part no longer needs support material to be printed and the angle has been changed to a vertical position. No support…
This is a remix of Thorin Oakenshield's Gear fidget It is a more complicated and intriguing loop of gears. This has 8 gears in total with 4 (3 unique) other parts supporting parts. Total of 12 parts instead of the original 4. This allows…
How I would print this: Scale to desired size before rotating. Support on build plate only. Rotate from flat to its face to an edge with a 45 degree rotation, then rotate it to stand on a corner point with 35.26 degrees. 35.26 comes from…
PlanetaryBearing_OD64_ID22_H10_S29P7x9R43_b30_e0.1 OD: 64mm ID: 22mm H: 10mm I recommend to print with regular PLA Green and Blue colors generally are not as forgiving on tolerances. Silvers and bronze also can stick hard. white, orange,…
This is a garden clip I made. It purpose is to be used in the garden. I have used it for cucumbers and tomatoes. If you print with PLA - I don't recommend printing it in black, as the sun will cause it to soften and stretch or even…
Warning! - Very tight tolerances ! This is a print that if your printer is not accurate or you use materials with lots of expansion will result in a fused part! I recommend to print with regular PLA I typically print overture PLA Green…
This is a attachable storage unit for the Qube 540 Full PC Case for the Cooler Master contest. I created a modified bracket from the base hook and I created a storage box to attach to the brackets for the Qube 540 Full PC Case.
Clipper Tray for pet groomers and barbers. I was tired of seeing these laying in a pile on the table all messy. Please find this useful and modify if needed.
20mm 6 segmented diamond made in blender. Choose your favorite colors and print a batch and hand them out for fun.
I recommend to print with regular PLA I typically print overture PLA Green and Blue colors generally are not as forgiving on tolerances. Silvers and bronze also can stick hard. white, orange, and grey seem fine Some orange PLA batches I…
Modified Qube 540 Base Hook I modified this to print better without supports and allow it to be combined with other parts in modular style. Remix main changes: 1. Make print ability easier. 2. Added points for putting parts on the base…
Dishwasher status sign. Uses 10mm by 1.75mm Disk magnets. Use superglue to keep them bonded to the parts. 2 parts to print, do a color change at a set layer to make the text stand out like in the photo. As always! Keep magnets and small…
These are all currently available results.
