Counting matching models…
I added mounting plate with holes to bit holder in distance so it can be screwed into the honeycomb storage wall. Thanks to GUZ_prints and RostaP for their work. For mounting i used 4x M5 Screws and 4x M5 Nuts and printed 4x “insert…
Its remix of a wall mount. I use it for my Metabo PowerMaxx BS 12 Akkus. According to the Lawny (Guy which kindly designed it in triple format), it can be used as well on Milwaukee and Bosch. I used 2x M4 inserts from honeycomb storage…
ESP32 Case for the model with external antenna. I made a longer version so i could manage the cable of the UFL Connector to the antenna. I relocated the pin holes. The original didn't fit to my esp32 ext antenna version. The mounting hole…
I designed a holder for two bottles of loctite for the honeycomb storage wall. I used: 1x Dual Insert M3 from RostaPs Honeycomb Storage wall 2x M3 Nuts 2x DIN 7991 Screws with L=8mm (i guess 10-12mm also works)
Hi fellows, i am using a digital microscope with a LED Ring for repairing and reworking. The LED Ring comes always lose and is falling down. I got annoyed of it and made distance spacer to press fit it onto the microscope. The outer…
Hi fellows, i didn't had a wrench with 7mm. So i designed one to use it during bleeding the hydraulic brakes (shimano). To open and close it with power i used pliers. During bleeding it is sufficient to use that wrench printed in PLA.
Hi fellows, i like that BambuLab Spools a got with my X1CC. In that bundle have been 3 Spools (1 from the 250gr Sample PLA, one from the Support Filament and one from the PA-CF sample. In addition I purchased a additional spool at the…
Hi, I designed a removal tool for the suntor NRX 7600 for the Plastik Cap. Printed in PLA, 45% infill, 6 perimeters. Works well on a ½ inch tool. Best regards, Diego
It is a design to hold 3 allen keys (Innensechskantsteckschlüssel) with 13/10/8mm. The shaft of mine, where 8mm for the 13mm and 7mm for 10/8mm Allen Key. I used 4x M3 Inserts from the honeycomb storage wall. 4x M3 Nuts 2x DIN912 M3…
Hallo fellows, i constructed a chain rim protector for my chain sheets near the pedals. It fitted on my shimano “system”. The holes on the chain rim need to be on a circle withe is about 155mm. The 4 holes need to oriented on that circle…
Hi fellows, i lost my original bike bracket of my abus lock. I printed this one for my Abus Bordo X-Plus 850mm. I guess it also fits on the longer ones. Printed in eSun ABS+ Black. I used two 2x screws M5 ISO 7380-1 A2 V2A Stainless Steel…
I designed a Philips Penlight Mount for the Honeycomb Storage Wall. I used: Dual M3 Insert from RostP. 2x M3 Nuts. 2x DIN912 M3 8-10mm This Model.
Hello fellows, I use this stamp ID card mount for my work card in combination with the honeycomb storage wall of RostaP https://www.printables.com/social/84389-rostap/about I used a screws with a countersunk screw and one of RostaP's M3…
I designed a wall mount in which my toppeak bike tyre tool fits into.
I designed a small dual clip for the Thule Bike Trailer flag. I printed it in pla.
I designed a hanger for clothing of our daughter. The wire is a spoke from a broken bicycle wheel. The hole on the top is designed for a 2mm spoke. Printed with Artillery Genius. 0.2mm layer height 15% Infill Gyroid eSun PLA+ 2/2…
Hi, I bought a bike trailer from ALDI to buy my every groceries. But lashing up the straps was a bit annoying. So i designed additonal lashes for the strapes I bought on LIDL. The hooks of the straps can be placed at the lashes and also…
Hi fellows, I wanted to true my bicycle. There are alot of quick aids, but i didn't not really like them. They are quite good for field repairs and fixes. A real truing stand was to expensive so i tried to make a compromise. The print…
That pc was to unable to use with USB Mice/Keyboards due to a bug. So i decided to make it as a tiny rpi alternative and mounted it onto the wall.
The light i used: https://de.aliexpress.com/item/1005009418298658.html?spm=a2g0o.order_list.order_list_main.11.25715c5fBrDHpV&gatewayAdapt=glo2deu Requires: 4xM4 16mm FLAThead screws like this:…
It is used to connect the cheap material trailer of my bike to my thule chariot coupler. Therefore i don't need to switch between the coupling systems of thule and the material trailer. The shaft is 7mm. The hole is designed for a 6mm…
Its a mount clips to attach to a bike handlebar to slide the frame of a glasses in. It is designed from handlebars from 22 to 30 mm. If there is a too much remaining of the rip, you can cut it with a cutter. It is designed to print in…
Both of my fender clips for my Endeavour 8 from kalkhoff (bike) are missing in action. I am pretty sure that that is not the only bike which has this U-shaped element in kombination with a clip to mount the tiny tubes to stabilize the…
These are all currently available results.
