Counting matching models…
3D Touch BLTouch Mount Kingroon KP3S 3.0 Direct Drive FreeCAD Source Files Included I tired this mount by benjibigbro, but it was too low [ https://www.thingiverse.com/thing:4816601 ] Thank you benjibigbro for your awesome design. I…
Spiral Bed Level Test These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size. I use these to set the Z Offset on the fly after auto leveling with a…
RC10 Gold Pan Rear Wheel 12mm Hex Adapters in various sizes. Allow you to fit cheap aftermarket wheels to the rear of your RC10. I saved them in various size thickness. I am using the 5mm thick ones on my RC10 with some cheap aftermarket…
Tyco Turbo Hopper / Taiyo Jet Hopper Tires! I have printed and tested these and they are functional. There are a few different files with various thicknesses. The thinner tires are best because they are going to be “softer”. You can load…
Nikko F10 Frame Buggy Rear Tires. These fit 1/10 Scale Buggies like the Nikko Rhino Bison Thunder Bolt, Sears Super Lobo II, Radio Shack Golden Arrow, etc. Fit Wheel / Rim size: 50mm Diameter x 35mm Wide The tire is about 85mm Total…
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To…
Tyco / Taiyo Gears Turbo Hopper, Bandit, Twin Turbo, Fast Traxx I have designed various gears to fit some Tyco R/C & Taiyo R/C Vehicles. Each model has two different versions. One that is stock and one that accepts a bearing. I don't know…
Key for Playskool BIGFOOT 4X4X4 SST Monster Truck I got a Bigfoot for Christmas in 1984! Like most kids I lost the key. :-( So I made new ones. :-) Now you can make your own. The PNG decal file is also included below in a zip file. I just…
Traxxas Slash 2WD Electronics Mounting Plate. This is a simple flat ESC Mount that fits in the stock ESC location on the stock Traxxas Slash 2WD Chassis and the LCG Chassis. It might fit other models that use the XL-5 ESC because that's…
This is a custom design! It is meant to replace the original using the original hardware. It should fit, but it is different than the original. It is thicker, and should be a better 3D Printed part than if I had tried to make an exact…
Tamiya Monster Beetle / Tamiya Blackfoot ESC Plate - Snap Fit! I designed this Mounting Plate to Snap onto the rear section of the Tamiya Monster Beetle and Blackfoot Chassis. I wanted a flat surface where I can mount my HobbyWing…
Front A-Arms for Vintage Losi XXX Buggy. These are not an exact copy of the originals, I tried to keep the same dimensions and geometry as the originals but they are beefier for a better/stronger 3d printed part. I have printed them, and…
Anet A8 BLTouch Mount - Right Side - Inline with Nozzle There are a lot of Anet A8 3D Touch mounts out there, but none met my needs. I wanted the probe on the right side and inline with the nozzle, not in front or behind it. I designed…
Nikko Lobo / Black Fox Front & Rear Tires I made these for my smaller 1/14 Nikko Lobo Frame Buggy. I think they will also fit Nikko Black Fox, Sears Lobo, Nikko Mosquito, and Tandy / Radio Shack Turbo Off-Road Frame Buggy. FYI: I was told…
Tyco Fast Traxx Tracks I made two versions. Simple Rectangle tread pattern. Original Lighting tread pattern. Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated…
Tyco Taiyo 9.6V Bumper Turbo Hopper, Heads Up, Wild Thing, Blaster, FX4, Jet Hopper Front Bumper 9.6V Version! This Bumper fits many of the 9.6v Tyco & Taiyo Buggy Models Want More Free Designs? Like and Comment! If you enjoy this design,…
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
Redcat Gen7 Crawler Servo Mount. It has two servo mounting positions: 1st holes are for the stock location with stock servo horn 2nd set of holes is Higher for a longer aftermarket servo horn Want More Free Designs? Like and Comment! If…
NIKKO R/C Transmission Mounts. Fits various Nikko Frame Buggies. This is the part that holds the Transmission to the Chassis. Fits various NIKKO and Radio Shack R/C 1/10 Scale Buggies. Fits F10, Rhino, Bison, Dictator, Golden Arrow, Sears…
Tyco Turbo Hopper / Taiyo Jet Hopper Spiked Rear Tire Low Profile Size 66.00-41-33 for the MK2 & MK3 Want More Free Designs? It helps if you please click Like and/or leave a comment! There are several different size rear tires for the…
Tyco Scorcher 6x6 9.6V Turbo Tire Set My poor Tyco Scorcher has dry rotted tires, so I designed these. These also fit the Taiyo Cyclone 6X6, and Tyco Rampage 6x6 Truck Front Size: 60.00-40-34 Middle Size: 70.00-46-40 Rear Size 80.00-52-46…
Team Associated Electronics RC10 Gold Pan Rear Wheel Adapters for fit RC10L BBS BoLink Style wheels You'll need some M3 screws to hold them on. The length of the screw will depend on how thick your wheel is. 10mm long should work in most…
Standard R/C Server Mount Posts These are simple Standard size Servo Mounts for custom applications. Useful for Pan Cars, Crawlers, Robots, or whatever. I made them for my RC10, and have used them on a Crawler as well. They have a hole in…
Nikko R/C Frame Buggy Light Pods 1/10 Size Nikko R/C Frame Buggy K/C Daylighter Fog Lamps Light Pods. Should fit lots of different 1/10 scale Nikko R/C Buggies. I also made some smaller ones for the 1/12 scale buggies. See my other…
NIKKO R/C Motor Mounting Bracket. Fits various Nikko Frame Buggies. This is the a bracket that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow,…
Tyco SUPER Fast Traxx Tracks I do not have a Super Fast Traxx so I have not printed this. I received the measurements from someone else, so I can't verify if they are correct. I have listed some of the important measurements below, so you…
TYCO Bandit Eliminator Wild Thing Hi-Jacker 9.6V Battery Door This battery Cover fits on the bottom of the Tyco Bandit, Tyco Wild Thing, Tyco Hi Jacker. Note: Does not fit the Tyco Fast Traxx. Want More Free Designs? It helps if you…
NIKKO R/C Battery cover. Fits various Nikko Frame Buggies. Thi is the battery door that goes on the bottom of the NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Dictator etc.. Sorry, I didn't test it. Let me know…
Nikko R/C Frame Buggy Light Pods for the Smaller size buggies Nikko R/C Frame Buggy K/C Daylighter Fog Lamps Light Pods. Should fit lots of different smaller scale Nikko R/C Buggies like the Turbo Panther. I also made some larger ones for…
Front Bumper for Tyco & Taiyo R/C 9.6V Cars List of cars this should fit: Tyco Lamborghini Countach 9.6V Twin Turbo Taiyo Lamborghini Countach lp500s Tyco Porsche 962 9.6V Turbo Tyco Marlboro Indy F1 9.6V Twin Turbo Tyco Valvoline Formula…
NIKKO R/C Motor Cover. Fits various Nikko Frame Buggies. This is the cover that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow, etc.. Sorry, I…
Battery Hold Down Strap for Losi XXX-T Stadium Truck. I couldn't find this one so I designed it in FreeCad. I made two different lengths because I don't have a Losi XXX-T. Someone told me the length, but there seems to be some confusion…
Nikko F10 R/C Buggy Chassis Brace **Want More Free Designs? Like and comment. Knowing people are using my designs keeps me motivated to make you. Thanks! I'm releasing these files under the Creative Commons…
Rear Body Mounts - Losi XXX 1/10 2wd R/C Racing Buggy I couldn't find these anywhere so I designed them in FreeCad. I printed them in PLA and TPU. They both came out nice. In TPU they are pretty much indestructible. I used a Brim, 0.12…
Battery Lid for the Honda CR250R Motocross Bike Featuring Ricky Carmichael RC Motorcycle RadioSack Model 60-4353 Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me…
TYCO Turbo Hopper Bandit Eliminator Wild Thing Heads UP and more This is the cover that holds the motor on the transmission on lots of different Tyco R/C vehicles. I made three different versions because models have the slot for the motor…
These are all currently available results.
