Counting matching models…
This covers the LCD screen for the Anycubic Kobra. I printed it with 10% infill (its thin so it doesn't matter) at 0.3mm layer height with a 0.6mm nozzle. 0.2mm is also fine.
This is a simple usb desk-edge holder to organize frequently used cables. I made it able to accommodate thicker cables. Print at 0.2 or 0.3mm, no supports. Use double sided tape or hot glue for mounting.
This is a great way for me to not lose another utility knife. It finally has a home!
Print two of each: Eyepiece cap is the smaller protector for the eye-side of the binoculars Objective cap is for the larger/final lens in the optical train I have added a small 4mm hole for attaching tethers so that THIS time I do not…
I originally made this watch pod to hold my Casio G-shock and noticed it worked for pretty much all my watches. Print at 0.2mm or 0.3mm (I like the top grain effect made by larger layer heights).
I made this to hold my needle files, works with many brands, note the dimensions below. Print at 0.2mm or even 0.3mm layer height, 10% infill. Holds 8 files. Holes are 5.5mm in diameter. The cube is 41.5mmx41.5mmx30mm
This is a simple twisted toothbrush stand that will fit most off the shelf cheap Colgate/Crest/other brands of toothbrushes. The design has a little drain to prevent water puddling inside. Print at 0.2 or any layer height you prefer.…
Print with white filament at 0.2mm or finer. The cap should be snug! if there are rough edges that make it hard to fit, print at a slightly larger scale. I've modelled a ridge inside the cap to stop the cap from being pushed too far onto…
Designed this coin holder to hold the 3 coins allocated to each player at the start of the game. The two capsules will fit within the designated coin area of the box to ensure easy set up and packing of the game components. Reminder: Two…
This caliper holder fits most standard vernier calipers and fits nicely onto Ikea brand LACK end tables. No supports needed, printed in PLA at 0.2mm layer height and 10% infill. Hope someone finds this useful!
This insert is quite big for my Anycubic Kobra, but it fits when rotated carefully. Use skirt or brim adhesion. There isn't too much space available in the box, so there is a purposeful gap where the cards lay, to allow for a finger to…
These are all currently available results.
