Counting matching models…
Suports needed! Printed on a Prusa Core One My setings were: i used organic supports contact distance :0.1mm interface patern spacing :0.1mm top interface layers :3 I printed in pla ,but abs, pet, petg or asa are ideal but i did not…
Printed in PETG with supports at 0.2mm layer height with a 0.4 nozzle I printed 1 pair in PLA but idk if it gonna shrink or deform in the summer's direct sunlight
Material ABS 0.2 layer height 0.4 nozzle diameter Print setings (from what i remember) 4 wall count 4 top solid layers 40% infill Tree Suport Suport contact distance = 0.15 Suport interfacing layers 3 Suport interfacing layers spacing…
Just another laundry clip
Printed in PLA and ABS The abs one was a bit tight but was ok
Hardware: -2x M3x8mm (or 2x M3x8mm) - Original M5 mounting screw -Original endstop pcb The metal tab of the endstop broke , and in homing noting was gona press the red button without the metal thing. And i didn't want to buy an new…
Tested in ABS and PLA for verifying the model shape Recommended to be printed in ABS, Petg or Pet PLA might be fine , if the HDD does not exceed 45 degrees Celsius 0.2 layer height
Setings i used: Printed in Polymaker PLA 0.2 layer height organic suports top contact z distance 0.1 interface pattern spacing 0.1 3 walls/ perimeters
I printed in PLA but PETG, PET, ABS, ASA or other materials can be used Print orientation you can see in photos
cover for the pillar between the doors
I had a sun shade already but i wanted to recreate a similar one to the one i bought
No supports needed
4b0 863 279 c wjd 80881
It is mounted on the equipment for more than 3 years, it didn't broke yet. Printed in PLA, but it can be printed in other materials too, like ABS, PETG, PET, etc but it not a part that is under stress, so the perfect materials would be…
These are all currently available results.
