P
Printablesablairlamb
Tennessee Vols sign
Little Tennesee Vols sign I designed for a friend. Print however you like!
- Downloads
- 446
- Likes
- 30
- Rating
- 5
All models
Counting matching models…
P
Printablesablairlamb
Onewheel XR Stand
Remixed/Re-drew the Onewheel stand that I found on here to add smooth curves to the bottom part and I also added some smooth ribs along the back side for aesthetics mostly. Works great, thanks to the original author. 200mm wide so it will…
- Downloads
- 382
- Likes
- 31
- Rating
- 4.8
P
Printablesablairlamb
Focusrite Scarlett Solo Under-desk Mount
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
- Downloads
- 237
- Likes
- 41
- Rating
- 0
P
Printablesablairlamb
Carvera Air Bit Collars
These are .step files for various bit collars for the Carvera Air (and original Carvera) CNC machine. Included files: 3.175mm (1/8") 4mm 6mm 6.35mm (¼") You may have to adjust for hole compensation on your own printer to make sure it fits…
- Downloads
- 138
- Likes
- 20
- Rating
- 5
P
Printablesablairlamb
Makera Carvera Air 3.175mm Collar Guide
I made this simple cylinder guide to use in the Makera bit collar installer. Mine did not come with spacers/sleeves for a 3.175mm (1/8") milling bit, so when I would put one of the collars on with the tool it would sometimes be a bit…
- Downloads
- 102
- Likes
- 21
- Rating
- 5
P
Printablesablairlamb
ABL Flipsky VX4 (Regular and Pro) Case with Finger Grooves
This is a remix of @2vid's VX4 Pro remote case, intended to be printed out of rigid material (PETG, ASA, ABS, PLA etc.). There are two halves and are joined using (3) screws. The screws I designed it for are from McMaster-Carr and are…
- Downloads
- 96
- Likes
- 8
- Rating
- 0
P
Printablesablairlamb
Dollar Shave Club Razor Stand
Simple razor handle stands I made for DSC (Dollar Shave Club) Club series Diamond grip handles, both standard and wider body shaver handles. I printed these out of Amolen Silk PLA and added a modifier to the prints and made the bottom 4mm…
- Downloads
- 63
- Likes
- 6
- Rating
- 0
P
Printablesablairlamb
Boardnamics 40T Kegel Pulley
Fusion 360 file for a Boardnamics 40T kegel style wheel pulley. You can use the file for design, or you can print a pulley to check fitment etc. I don't know if I'd recommend printing one for skating use because of how fragile the kegel…
- Downloads
- 61
- Likes
- 4
- Rating
- 0
P
Printablesablairlamb
MBS Matrix 2 angled risers
MBS Matrix 2 angled risers: +5 and -5 degree. They are labeled as such in the model. There is a version of the +5 with a cutout in it that I routed my Davega cable through, but I included a model without the cutout notch as well. I have…
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
Printablesablairlamb
1UP Bike Rack Lock Bushing
These bushings go on both sides of the hitch lock provided with 1UP hitch-mounted bike racks. In my case I am using the Super Duty rack with a 2" hitch which measures a little over 2.5" outside (64.4mm). I printed these out of TPU with 3…
- Downloads
- 38
- Likes
- 12
- Rating
- 0
P
Printablesablairlamb
Onewheel GT WTF Rail Badge & Bumpers
I modeled a rail badge after a genuine Float Life WTF rail badge (same dimensions for the pegs, etc.) but with no logo on it. I printed mine out of 95A TPU and it fits perfectly, no tape needed. The rail bumper protectors are my own…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
Printablesablairlamb
Acedeck NYX Z3 MBS wheel adapters
This is a shock pad adapter I created to allow you to run MBS pattern wheels (in my case, MBS Rockstar Pro II XL's) on Acedeck NYX Z3 Element AT gear drive. In order to use them you need a wheel plate adapter from Newbee (note: you can…
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
Printablesablairlamb
MAD Max 125 esk8 wheel
I modeled this wheel (out of boredom) from a MAD Max 125 that I own. Use it for modeling of your own, or print them, install them, destroy them, wreck and injure yourself. I don't care what you do with it, just use common sense.
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
Printablesablairlamb
Acedeck NYX Z3 Gear Drive Shock Pad
Replacement shock pad for Acedeck ELEMENT Gear drive, as found on the NYX Z3 (what I modeled it from) and N3 boards. Print in TPU in your preferred settings.
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
Printablesablairlamb
Rubbermaid FastTrack 200x50 Esk8 Holder
Board-hanging holders designed for the Rubbermaid FastTrack wall rack system. I designed these to fit 200x50mm tires (8"). I printed mine out of ABS on a Bambu X1C with 5 walls and 25% cubic infill. My board is 40-45lbs and it holds it no…
- Downloads
- 24
- Likes
- 9
- Rating
- 0
P
Printablesablairlamb
Newbee 4GS Shredlight mount
Simple Shredlight brackets that slip over the top of the Newbee 4GS gear drive. Inside measurement is 22mm between bracket "legs". Best printed vertically with the slanted "tooth" part of the shredlight slot closest to the bed, with a…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
Printablesablairlamb
Dewalt Stealthsonic 32mm Holy Reducer
This is a vacuum reducer for the 6 gallon Dewalt Stealthsonic vacuum, to go from 45mm to 32mm. I designed it for my Makera Carvera Air with an existing 32mm inlet elbow, but you can edit the .step file as needed for your application. The…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
Printablesablairlamb
Ororo Mini 5K Battery Holder
Ororo Mini 5K Battery Holder/Stand I designed this stand so I could keep my two batteries together and charge them simultaneously without always looking for the other one, etc. Pretty simple model, the packs fit nice and snug in there.…
- Downloads
- 14
- Likes
- 0
- Rating
- 5
P
Printablesablairlamb
Dollar Shave Club Blades Stand
Simple stand I designed to hold up a sleeve of DSC Club series blades (6-blade razors). I had made stands for the handles themselves, figured I might as well make one for the blades also. I printed mine out of basic transparent PLA+. I…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablesablairlamb
MBS Matrix II Shredlight mount
Slight remix of the original MBS shredlight mount. The original didn't fit my SL300 lights (the light bottomed out inside because of the closed back and couldn't fully latch in. This version has an open back so the light can click in…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
Printablesablairlamb
MBS Rockstar II Pro XL Hub Wideners / Spacers
These are widening spacers for MBS Rockstar II Pro XL wheel hubs for esk8. I made them in various thicknesses - 5, 10, 15, 20, and 25mm wide. Note that you will need to get longer screws to accomodate the spacers. Stock wheel screws are…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
These are all currently available results.