Counting matching models…
Do you like Managed Democracy? Well now you can spread it all over your local airsoft field! When I posted the original Backhammer kit for the PLR-16, people brought up its similarity to the Liberator from Helldivers, and suggested that I…
The Manticore is (to my knowledge) the first shell-ejecting blowback 40mm launcher in the world. It uses HPA to cycle short 40mm grenades (shells shorter than 90mm), and fires in semi-auto. I recommend printing all of the parts for this…
The Libra Classic break action shotgun, in 40mm form! Compatible with all standard 40mm airsoft grenade shells. All build instructions and files are below, including .f3d and .obj files for that sweet, sweet remix culture. In addition to…
I'm too cheap to buy a real BCM, so I made this. Mounts to Mlok rails, and the grip angle is 82 degrees.
Vertical grip that mounts to mlok rails. Stubby version included. Feel free to comment or message me if you need any help!
There really isn't a lot to this model. I needed a handstop for my mp5, so I drew one up real quick and printed it. I thought other people might find it useful, so I'm publishing it here.
Someone wanted over 8 dollars for the files of this handstop, and then was rude to the people who asked him about that ridiculous price, so I decided to make an identical copy of it and release it for free :) 3D printing is a wonderful…
This is a bullpup kit for the PLR-16 gbbr by WE-Tech. I ended up with a PLR-16 in my possession a few years ago, and it didn't see much use because of how bizarre and unwieldy it is. I decided to make this kit to turn it into a much more…
I am going away for the next couple of years, so I wasn't able to make an assembly guide and a gameplay video like I normally do. In addition to the 3D printed parts, you'll need to buy the following: 1 - Some of this pipe to make the…
I made this to use as reference while modeling, and I thought it might be useful to others as well. It is non-functional, it only serves as reference. If you printed it out and filled it with green gas it would probably explode, so don't…
I did this over the weekend because I was bored. It's exactly the same as the Libra 40mm grenade launcher, just significantly more rock and stone than the original. It's not a perfect replica of the one in the game, but I did my best to…
I loved the look of the MREX rail system by PTS, but I didn't want to drop $100+ on one, so I made a 3D printed clone of it. Installation is super easy, all it does is replace the regular picatinny rails on your rifle. There are multiple…
This is a kit for all M203-type launchers. Pretty straightforward, and it should work across all grenade launcher brands and barrel lengths. Below I've included STLs, IGESs, and F3D files, so you guys are welcome to go nuts remixing and…
This is just an airsoft version of the whizzbanger from H3VR, for firing 40mm grenades. To assemble your whizzbanger, you will need the following a 5x65mm rod for the firing pin mount another 5mm rod for the firing pin itself (the length…
The most common complaint that I got with the Manticore project is that the receivers are just too big for most printers. I've split them up into smaller parts to make it more doable for most people. You will need ten 1.5 inch 8x32 screws…
I make lots of 40mm airsoft grenade launchers, and I try to make as many of them taginn-compatible as possible. It's a lot easier to do that when I have a 3D representation of a taginn shell to use as reference in my design space. It's…
I CAST WALL OF TEXT I am an airsofter who has just moved to a place with no airsoft fields nearby. There is, however, a local nerf club. I decided to put a blaster together and give that a shot. This project is that. It's my first time,…
Title basically says it all. If you want to throw on an MCX stock or whatever, you can use this adapter.
I wanted an ACR stock for my scar, but didn't feel like dropping 40 bucks on one, so I designed this. The stock has 4 positions To assemble it, you'll need a couple 5mm steel rods to cut up to use as pins, as well as a compression spring…
Just a dinky little side project that I thought would be neat. I designed this for my own personal scattergun, which is the TS version. This thing should fit fine on most of the scattergun variants, though I'm not entirely sure if it will…
This is a 1:63.3 scale replica of a reactor at the Civaux Nuclear Power Plant in Civaux, France. This reactor/turbine design was the precursor to the European Pressurized Reactor System, which now provides 10% of the world's electricity…
This isn't a super complicated one Designed to fling a plethora of different projectiles (included shell for launching EG18 smoke grenades) You will need: Any 3inch pipe One of This type of 40mm airsoft shell:…
I had ten minutes with nothing to do, so I made a comically large M16 style carry handle for picatinny rails. It's over 2x the size of a normal carry handle. That's 100% more carry handle, per carry handle! Matching triangle front sight…
Edit: I readjusted the tolerances, I realized I added a decimal somewhere there was not supposed to be one. to preface this, this is an AIRSOFT lower receiver. It will not fit on a real Kel-Tec PLR-16, and if it did, it would probably…
I made this to help out with cable management on pneumatically driven airsoft guns, like the Manticore. If you liked the Manticore, keep an eye out, there will be more projects like it coming soon. Slide it onto the desired rail and use a…
I just needed a simple stock model to toss on a nerf blaster that I'm working on. It's nothing terribly fancy, but it works. Good for both nerf and airsoft applications. Stock pushes up to fold, and pulls out to extend. If your stock…
If you're like me, you always forget what bb weight you fill your speedloader with. I made this simple dial label to keep better track of what's in my speedloaders. The only external parts you will need are 4 machine screws and nuts. The…
This is a replacement lower receiver for the Grenadine that takes nightingale mags instead of talons. No additional hardware required.
V1 and V2 WE-tech scars often have issues with the bolt catch being inconsistent. The culprit of this issue is usually the bolt catch arm being slightly too thin for the stop on empty function of the magazine to push it up all the way.…
These are all currently available results.
