Counting matching models…
3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
Enjoy my Magic Spinning Bullet! Impossible to spin the normal way - challenge your friends to get it to spin! Print settings: You have to use my print profile - there are a lot of settings that need to be just right! Will not work, if you…
Ones assembled, the Cube is locked and can only be disassembled with a trick: Spin it really fast! Size: 35mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: No supports Elephant foot compensation: 0.2mm…
Birby is a snap-fit 3D Puzzle, that turns out to be a cute bird. Also available as a kit-card. The numbers on the pieces show the sequence for building it. Printing instructions: Use a well-calibrated printer with dry filament! 0,2mm…
Bring some extra cheer to your 3D printer this holiday season with the Santa's Sleigh Snap-Card ! This unique model combines the fun of a Christmas greeting card with the satisfaction of a 3D-printed display piece. The design prints…
Only works: With DRY (!) TPU95 - only TPU 95! With the provided print settings In 90% of cases (not all TPU 95A filaments are the same) Print settings: Wall Generator: Arachne Layer height: 0.192mm (leads to 2.3mm total height, which is…
I am collecting border values for nonplanar printing for common printers. See Details on the project in this reddit post . This testprint tests nonplanar printing on your printer, by going steeper in 2 degree steps up top 12 degrees. Max…
A cute Valentines Day Kirby holding a heart :) Perfect as a Valentine’s Day gift or desk decor. SIze: 38mm x 42mm x 37mm Print Info: Monocolor: Just 12g and printed in <1 hour! Multicolor: See 3mf file Use the provided 3mf files for…
Print with settings from 3mf file! - 0.12mm layer height, use support settings provided as they are optimized. Filament: Recommend matte PLA.
Enjoy my Super Mario Question Block 3D Puzzle! Important: Make sure to get off your supports cleanly - also small remainings! Puzzle will not run smoothly otherwise. Assemble and disassembly a few times to smoothen it up! Print according…
Enjoy my minimalistic easter bunny design :) Sizes: Four size suggestions shared (see files), but I esp. love the small ones. Please size as you like. XS prints in <30 min with 3g of filament. Print instructions: Supports: No Brim:…
Once assembled, the Pumpkin is locked and can only be disassembled with a trick: Spin it really fast! Size: 50mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: Tree Supports Support Object First Layer…
Height is 90mm and Supports are needed are optimized in the 3mf file - I recommend to keep the settings.
+++ Bambulab A1 family only - will add more +++ Drop the .gcode into your slicer, send to printer and go. Bambu studio will not allow direct printing. Sent to printer and start from there. This prints a coaster with a nonplanar surface…
I still love the Call of Duty Modern Warfare 2 Prestige 10 Emblem, so I designed it off the 256x256px original image. It's 48mm wide. Print Instructions: 0.2mm nozzle recommended, 0.4mm nozzle works as well (see 3MF files) 3MF files for…
Use the 3mf file provieded to get a Porsche Keychain Accessory of 65mm length. Supports have been optimized, so use the settings provided in 0.12mm layer height.
Have fun with my Monitor Meowth! Use the settings proviede in 3mf file - supports have been tweaked to work well. Matte PLA recommended. Mono- and multicolor 3mf version available! Two versions with different Gap sizes: 10mm for slim and…
The scanned sculpture is a copy made by Guy Hain, who is a French art forger who produced number of fake bronze sculptures. The Lion is located by the entrance of Ny Carlsberg Glyptotek in Copenhagen.
Enjoy my Baltoise Spinning Top! A special inner geometrie allows it to spin nicely! Print settings: You have to use my print profile - there are a lot of settings that need to be just right! Will not work, if you don't use my print…
This is a test print for Nonplanar Slicing using THIS Orca Slicer Fork . Using this, you can avoid stair stepping on your top surfaces. See the link above for details and a list of supported printers. Slice once with Nonplanar Surfaces ON…
Print instructions: Supports: Are needed depending on your filaments overgang performance and how critical you are. Material: Matte PLA
These are all currently available results.
