P
PrintablesRoboMagus
Cat Ears
A cute cat ears headband. Might be quite tight for bigger heads, but you can heat it up slightly with a hairdryer and pull the legs appart to reduce pressure.
- Downloads
- 4,601
- Likes
- 445
- Rating
- 4.95
All models
Counting matching models…
P
PrintablesRoboMagus
Knurled PC4-M6 PTFE Drybox Feeder
This is a simple solution for a drybox filament feeder using the PC4-M6 bowden tube coupler. For assembly only a single 8mm hole is needed in your drybox for the filament feeder to pass through. Assembly of these parts does not requires…
- Downloads
- 1,840
- Likes
- 320
- Rating
- 4.94
P
PrintablesRoboMagus
Gecko fridge magnet 8x3mm
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
- Downloads
- 1,707
- Likes
- 315
- Rating
- 4.96
P
PrintablesRoboMagus
Drybox humidity sensor mount
This is a simple humidity sensor mount for your filament drybox. I've created this to fit the IKEA samla boxes, but should work fine with any transparant storage box. It is designed around those cheap circular LCD temperature / humidity…
- Downloads
- 1,163
- Likes
- 187
- Rating
- 4.92
P
PrintablesRoboMagus
Lenovo Legion 5 Pro Riser Feet
These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…
- Downloads
- 1,078
- Likes
- 88
- Rating
- 4.92
P
PrintablesRoboMagus
Pegboard Shelf Mount
Pegboard shelf mount of about 222mm deep. This bracket has some discrete curvature to the supporting struts. Supports are required for the outermost pegs and hooks only. (Middle ones are angled such that no supports are required).…
- Downloads
- 975
- Likes
- 188
- Rating
- 5
P
PrintablesRoboMagus
Storage bin pegboard mount
A strong and simple to pring storage box pegboard mount. The hooks on the back ensure a secure fit to the board allowing it to hold heavy boxes without the risk of the mount falling of the pegboard. This part is fairly specific tailored…
- Downloads
- 585
- Likes
- 98
- Rating
- 0
P
PrintablesRoboMagus
Prusa MK3s Extruder Carriage for Bear X-axis
This is a modification of the original R4 extruder carriage for Prusa MK3s / MK2.5s to make it compatible with pekcitron's Bear X-axis, as the MK3s STILL does not offer a decent X-axis belt tensioning mechanism. The original Prusa…
- Downloads
- 495
- Likes
- 66
- Rating
- 4.83
P
PrintablesRoboMagus
EU Power Socket Cover
A simple power socket cover for european grounded sockets with print in place hinged tab for easy removal. Won't do much to keep nosy kids that carry around forks safe, but surely feels safer with curious kittens exploring the house.…
- Downloads
- 431
- Likes
- 44
- Rating
- 4.75
P
PrintablesRoboMagus
Slim 90Degree MK52 heatbed cable cover for Prusa MK3
I had already uploaded this thing to my MyMiniFactory account after I found the cover by tcurdt which had inspired me to design this cable cover to begin with. So even though this is not technically a remix, credit where credit is due for…
- Downloads
- 400
- Likes
- 62
- Rating
- 5
P
PrintablesRoboMagus
Pegboard Tweezer Holder
Pegboard mount for assorted Tweezers. 10 Cutouts suitable for various tweezers and a circular cutout for 2 stacked 8mm x 3mm magnets to hold tweezers by magnet. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and…
- Downloads
- 339
- Likes
- 61
- Rating
- 4.75
P
PrintablesRoboMagus
Prusa Steel Sheet Holder - Open Front x3
A simple steel sheet holder with an open front for easilly sliding sheets in and out. This is a remix based on my original 2 sheet holder that holds 3 sheets. I have no picture of this one, but for impressions take a look at the linked…
- Downloads
- 270
- Likes
- 34
- Rating
- 4.91
P
PrintablesRoboMagus
Minimalistic Pegboard Plier Mounts
A simple pegboard mount for spring loaded pliers of widths 12, 13, and 16mm (those are the sizes of the pliers that I have lying around). Pliers easilly fit in their mounts when pressed, but when released the pliers will expand to hold on…
- Downloads
- 232
- Likes
- 68
- Rating
- 4.5
P
PrintablesRoboMagus
Wera Hex-Plus Pegboard Mount
2 Simple hooks for a pegboard to store a set of Wera Hex-plus allan keys. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height.
- Downloads
- 230
- Likes
- 39
- Rating
- 5
P
PrintablesRoboMagus
MK3s PC4-M6 FilamentSensorCover
A simple modification to the new MK3s filament sensor cover (sourced by jzkmath) to connect a reverse bowden setup using a PC4-M6 coupler.
- Downloads
- 213
- Likes
- 26
- Rating
- 4.5
P
PrintablesRoboMagus
![MK3s Extruder Carriage for Bear X-axis [RJ4JP Mod]](https://media.printables.com/media/prints/34460/images/340643_14294616-2ba0-4448-a82b-6254cfc32709/d37e9d365a40508536982a49a5ba64c5_display_large_34.jpg)
MK3s Extruder Carriage for Bear X-axis [RJ4JP Mod]
Though my initial design for the R4 series prusa MK3s extruder carriage for the Bear X-axis has served me well, using it with Igus RJ4JP bushings gave too much play on the extruder for my liking. This modification takes my initial design…
- Downloads
- 213
- Likes
- 30
- Rating
- 5
P
PrintablesRoboMagus
Prusa Steel Sheet Holder - Open Front
A simple steel sheet holder with an open front for easilly sliding sheets in and out. Holds 2 sheets. Made to be mounted on the left side of e.g. your printer enclosure. For mounting on the right side just mirror the design in Slicer.
- Downloads
- 209
- Likes
- 15
- Rating
- 5
P
PrintablesRoboMagus
Prusa MK3 NozzleCam
This is a multi-part design for a somewhat adjustable 5.5mm nozzle camera which can be mounted to the extruder carriage of a Prusa MK3. The STL contains all required parts, including a modified extruder cable holder, an adjustable…
- Downloads
- 208
- Likes
- 38
- Rating
- 4
P
PrintablesRoboMagus
AA / AAA Battery dummies for DC Power
Easy to print AA & AAA battery dummies. Tired of having to replace dead batteries on all your devices? Hook them up to a power supply instead, using these dummies. For each dummy battery you'll need an m3 nut and a round head m3 bolt (See…
- Downloads
- 201
- Likes
- 26
- Rating
- 0
P
PrintablesRoboMagus
Simple 4 Quick Fix Worldwide Mount-plate
A simple generic mount plate for the 4 Quick Fix Worldwide system. Houses 4 M3 hex nuts for mounting to accessoires. Print in orientation provided to ensure secure fit. Prints without supports. The pictures show a modified model as the…
- Downloads
- 187
- Likes
- 5
- Rating
- 5
P
PrintablesRoboMagus
![Skyrim door quest marker [remix]](https://media.printables.com/media/prints/34457/images/340612_5e5ba879-ed3a-49d3-90f6-360f0f9503b3/cad64d536953cf89ec0cfd8eebb82b6f_display_large_34.jpg)
Skyrim door quest marker [remix]
A little remix imported from Thingiverse where the quest marker is slightly separated from the doorway to more acurately match the in game markers. In addition I slightly raised the top diamond a couple of millimeters for a bit more depth.
- Downloads
- 185
- Likes
- 24
- Rating
- 0
P
PrintablesRoboMagus
K2 Filament Clip: Drybox-Remix
A simple remix to the K2 Filament Clip that adds a 4mm hole through the center that is compatible with most common size PTFE tubes (reverse bowden). Ideal for use in drybox where the PTFE tube feeds through into the box (for example my…
- Downloads
- 167
- Likes
- 28
- Rating
- 5
P
PrintablesRoboMagus
Machi Koro box organizer
An insert for the original Machi Koro game box. It separates the box in 5 sections for card stacks. This provides plenty of room for the original game and the 2 expansions. There's a place to store the dice, and each stack holder has…
- Downloads
- 167
- Likes
- 22
- Rating
- 4.5
P
PrintablesRoboMagus
Gunpla Pegboard base - remix
A simple remix of the Gunpla base walll mount by onerian so that it fits on your pegboard. It will fit the genious 1/144 scale adjustable arms from soozafone . Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and…
- Downloads
- 166
- Likes
- 67
- Rating
- 0
P
PrintablesRoboMagus
Prusa MK3s detachable NozzleCam
After overheating a borescope camera by printing too much ABS I have redesigned my previous design to be detachable. This saves me from buying a new camera every couple of months and digging up my allan keys to disassemble the camera…
- Downloads
- 130
- Likes
- 33
- Rating
- 4.5
P
PrintablesRoboMagus
Drippy bucket remix for pegboard
This is a remix of the drippy bucket with a cleat in the flat side of the bucket which slots into the pegboard mount. Color infills and accessoires of the base model are fully compatible and need to be downloaded separately! Bucket prints…
- Downloads
- 99
- Likes
- 38
- Rating
- 0
P
PrintablesRoboMagus
WD Pasport harddrive pegboard mount
A harddrive pegboard mount for WD MyPassport Ultra. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height. Requires supports for the upper row of pegs.
- Downloads
- 96
- Likes
- 16
- Rating
- 5
P
PrintablesRoboMagus
Enclosure plexiglass door fittings.
I turned my shelving unit into a 3D printer enclosure, which resulted in fairly large doors that would be far too flexible if made from plexiglass alone. Thus came the idea of using 4mm plexiglass sheets, framed on the top and bottom by…
- Downloads
- 90
- Likes
- 19
- Rating
- 0
P
PrintablesRoboMagus
JBL Go2 Pegboard Mount
A simple Pegboard mount for the JBL Go2. Designed for a pegboard with a 25.45mm pitch, 6.0 to 6.5mm hole diameter and about 5.5mm thickness. Printed in PETG at 0.2mm layer height. Supports are needed for the 3 Pegs at the top of the model.
- Downloads
- 81
- Likes
- 24
- Rating
- 5
P
PrintablesRoboMagus
Samla PTFE Clip
A clip for Samla (65L and similar) drybox solutions with an integrated PTFE tube holder. Designed for PTFE tubes with 4mm outer diameter. Print instructions Print using plenty of perimeters (I used 4) to give the clip enough strength.…
- Downloads
- 70
- Likes
- 8
- Rating
- 5
P
PrintablesRoboMagus
BulletBill Pegboard Mount
A simple Pegboard Mount for BulletBill designed by Martin Moore . I designed this around a 165% scaled BulletBill model, but have uploaded the folowing scales as well: 100% 125% 150% 165% (Step files included for 100% and 150% for those…
- Downloads
- 65
- Likes
- 20
- Rating
- 0
P
PrintablesRoboMagus
Arduino Pegboard Mount
A simple Pegboard mount for Arduino Uno / Leonardo (and similar PCB boards). The complete mount consists of a hook at the top and a clip at the bottom for a secure fit of the board. This mount is designed for a pegboard with 25.45mm…
- Downloads
- 58
- Likes
- 11
- Rating
- 0
P
PrintablesRoboMagus
Powerstrip holder
EU Powerstrip holder for shelving unit (Stellingkast for my fellow Dutchies). The hooks are printed separately to ensure both proper strength for the small hook tabs, and the best possible alignment by glueing them in place for your…
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
PrintablesRoboMagus
Breadboard Pegboard Mount
This is a 2 piece mount for BB-2T4D-01 Breadboards, designed for a pegboard of 25.45mm pitch with holes of 6.0~6.5mm diameter. With the 2 pieces attached to the Pegboard, the breadboard can be slid in and out from the top. Suggested to…
- Downloads
- 40
- Likes
- 11
- Rating
- 5
P
PrintablesRoboMagus
ArtRail Slide
A small slide for hanging stuff from an art-rail using an m3 bolt. Made to fit Artiteq profiles. It's a thin slide that allows some wires / cable to fit above it in the channel. So this tiny print is also quite usefull for hiding wires…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesRoboMagus
Snapable Drag Knife Mount for Prusa MK3S
This is a remix based on the Drag Knife Mount for Prusa MK3S by Jonas Pedrotti. The main change is that it now snugly snaps to the fan based on the geometry of the Fan Guard by Der Peiner. Other changes include prinatability improvements…
- Downloads
- 18
- Likes
- 5
- Rating
- 5
P
PrintablesRoboMagus
Multiboard USB + SD holder
A small storage holder for Multiboard that uses Multipoint connections. Holds USB drives (Both A and C), Full size and micro SD cards. This design comes in sizes of 2 or 3 units in regular and diagonal variants. The regular version is…
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesRoboMagus
NanoPi Neo2 OLed Metal Case SD-card Cover
A small cover for the NanoPi Neo2 OLed Metal Case SD-Card slot. Prevents accidental ejection of the micro SD card, but keeps all other ports fully accessible! It should be a snug fit, but it does require a small dab of glue or thin double…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesRoboMagus
Twistlock Multipoint Snap
A low profile version of the original Multiboard Snap - Twist-On Multipoint Mount. Can be used to mount Multipoint accessoires flush to your Multiboard.
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRoboMagus
NanoPi Neo2 OLed Metal Case SD-card Snap-fit Cover
Prevents accidental ejection of the micro SD card and keeps the USB ports fully accessible! This is a remake of my previous SD cover for the NanoPi Neo2 case , but instead of requiring tape or glue to keep the cover in place, this one…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesRoboMagus
LG MagicRemote AdBlocker
Are you also sick and tired of those advertisement buttons on the bottom of TV remotes? Buttons to apps you never want to use but that cannot be remapped to stuff you'd actually like. After accidentally pushing the Netflix or Disney+…
- Downloads
- 11
- Likes
- 6
- Rating
- 0
P
PrintablesRoboMagus
10 inch rack mount for cm952 8 port Ugreen switch
A 10 inch rack mount for CM952 8 port 2.5Gbps ethernet switch by Ugreen. Switch can be secured using m3 nuts and bolts (8mm length). I had some square nuts laying around that could be press fit into the wallmount cutouts. With thinner…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesRoboMagus
Soehnle AC500 AirPurifier Cover
A press fit cover for the Soehnle AC500 Air Purifier. Blocks the light and buttons of the device. Ideal for keeping cat paws away from the buttons.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
These are all currently available results.