Counting matching models…
This is what the work would be if he was turned into a pickle for the Christmas season. I have added a hole in the back where a hook can be added. I have not printed this yet, but will update once I get a chance.
This mount allows the Ryobi 40v Expand-it trimmer to be hung from the wall with the trimmer head still attached. The only holder that I previously found for the Ryobi was for the power head only, but didn't have enough space to allow the…
My young son love Elmo so I designed an Elmo head that can be 3D printed. To print, you need 1 head, 1 nose, and 2 of each of the eye parts. The parts should be glues together. This is so that everything can be printed in different…
A draw bridge that is compatible with both Brio and IKEA. An M5x35 or 40 bolt secures the bridge to the base pillar. There is a long And a short option. The long option is designed to be the length of the “D” track (216mm) from pillar to…
A simple bracket to route a CPAP hose along the top of an IKEA Malm headboard. The back side that holds the hose is open to allow for easy removal. There are 2 version, one is designed to go around both sides of the headboard while the…
This is a remix of Granny Glasses by DoomMiester. These glasses are from the Bluey Episode “Here Come the Grannies!” and are the glasses that Rita wears. I made adjustments to the original model so that they would fit an adult properly…
I wanted a way to hang my M12 grease gun on the wall. All of the mounts I found were for the M18 version and I didn't see any for the M12 version. This mount attaches to the wall using 2 screws and allows it to hang. I printed in PETG.
A good friend of mine had a Star Trek Themed wedding. I decided to design a Baldric based upon the one Worf wore in TNG. It is made up primarily of the rings and loops. The loops have an opening that allows the rings to be connected to…
I wanted to make my son a long jump for his Hot Wheels Track. This has a ramp angle of around 25 degrees and a total ramp length of around 220mm. I printed in PLA.
This is a Paw Patrol badge that I designed to be attached to a fireman's hat so that my kid could be Marshall for Halloween. The badge has 4 parts. A “shield” that gets glued directly to the helmet. An “inner shield” that gets glued into…
This is a health tracker board for the DM/GM of D&D/Pathfinder to track the HP of NPCs and/or Enemies. This can track the HP of up to 10 characters up to a maximum HP of 399. The HP is tracked in Tens, Tenths, and Hundreds. To assemble,…
Show someone you care by giving them a Token of Appreciation! There are several designs, round a hexagonal. Also there is a blank version of each and a version of each with a smiley face. Feel free to add your own design to the blank…
I decided to remix the print in place claw toy gripper and put a Pokeball on the end. This version is not print in place however. I have modified the pins so that the snap in place. To print, you will need to print one of each file. If…
A printable version of the Allis Chalmers Diamond Logo that I made for a friend.
The Owlete Baby Monitor Camera has a rubber backed base. This means that stick back Velcro or Command Strips do not stick to it well. This mounting bracket utilizes the holes on the mounting base made for screws and allows you to mount…
i needed a bracket to mount my backup camera to the back of my camper. This is designed to fit over the existing center light with the cover removed. You can then mount a replacement center light to the outside of the bracket. It uses the…
This is a dice cup that I designed to look like a barrel. It is not the standard barrel shape and is tapered. I printed it in PLA with supports. It could probably be used as a drinking cup if printed in PETG.
“Merchandising, merchandising, where the real money from the movie is made.” Newly added to the SPACEBALLS line of items is: SPACEBALLS THE WHISTLE This iconic piece of merchandise goes along great with the other SPACEBALLS themed…
These caps are designed to go onto the hose end and suction end of the Harbor Freight Fuel Transfer Pump. These are designed to keep debris out of the hose and pump while it is being stored. The potential HF# for this pump is 63847,…
Have you ever wanted to pull a fire alarm but didn't want to cause a panic or get in trouble? Well now you can! You can print your very own Pull In Case Of Emergency handle to mount on any cabinet or drawer that you please! This is a…
This is a stand for a Nintendo Switch that attaches to the sides where the controllers normally attach. The stand sits high enough so that a right angle USBC cable can be connected to the bottom for charging. The right side also has…
I saw several Ikea Malm Headboard compatible remote holders, but they all sat in front of the headboard and I wanted one that sat on top of the headboard. There are 2 versions, one with legs on both sides and one with a leg on one side.…
I created some numbered pawn bases to hold pawns for D&D/Pathfinder. These can be useful for the DM/GM if they have multiple of the same enemy for players to battle. There is a small size which takes up a single square on a map and a…
This mount/bracket allows you to keep the entire antenna mounted under the body of the slash. It just clips on to the chassis. It also has an eyelet that allows for you to attach a tether to the battery retainer clip. It is best to print…
This will move the stock frond bumper forward to allow for larger tires. uses the stock mounting holes on the pan and the bumper but you will need to get another set of hardware and tap the holes in the riser. You will no longer use all 4…
I wanted to have a PTFE mount for my Sunlu S1, but most of the models out there have the mount attached using existing screws. I wanted to have something that is easily removable due to how I have my S1 setup to feed into my printer. This…
I designed a charging dock for the Skull Candy Indy headphones case. The dock has a hole at the bottom to insert a right angle micro USB cord. The cord that I used is Startech USBAUB2MD and was purchased from Amazon.
This allows for Ryobi Expand-It attachments to be mounted to the wall. The hangers hang from a piece of DIN Rail that gets mounted to the wall. This allows them to slide. The hangers have a key way for the dimple of the attachment to…
I was only able to find one bracket to mount the screen of my backup camera to the mirror of my truck but it didn't fit well, so I designed my own. This bracket it printed in 3 parts and then held together with 4 m4 screws. The screws for…
The clear plastic tray that holds the cards in our card shuffler broke. I designed a replacement that fits well. I printed in PETG because that what was loaded into my printer at the time but really anything will work. I printed on it‘s…
The chain kept coming off of the flush lever inside my toilet tank, so I designed a retainer that keeps the chain from falling off. It secures with 2 zip ties. One zip tie goes through the hole that the chain goes through and the other…
This is a remix of the Kinect Camera Mount by skyhawkcosplay. I liked the design of the mount but I wanted to mount it to the end of a piece of 2020 aluminum extrusion. To achieve this, I had to move the hole and add indents on the top…
This magnetic broom mount is designed to slide onto a broomstick and allow it to be hung from a metallic surface. The mount uses 3 10mmX3mm magnets. They seem to pop into place securely, but could also be glued for extra insurance. The…
The trigger for the dog poop scoop I use broke, so I made a replacement. The replacement has 4 pieces. a left and right handle and a left and right trigger. The trigger pieces get glued together with the end of the cable inside. The…
I really like the RadioShack branded soldering iron stand that I have. Unfortunately, the stand was designed to be used with a larger soldering iron and the TS100 that I have right now didn't fit well. I removed the plastic cup that the…
This is a protective case that I made for the TPMS system that I use on my camper. The case has space for all 4 TPMS valve stem caps, the display, the wrench and nuts that come with the sensors, as well as some extra space for some…
My 375 gallon hot tub requires 3.75 teaspoons of powered chlorine to shock the water. I made a measuring cup with the approximate volume equal to 3.75 teaspoons so that I don't have to measure out each teaspoon individually. If you need…
I use this to monitor my tire pressure while towing my camper:…
This CD Jewel Case Stand/Mount can be used to hold a single case and can either be free standing or mounted to the wall. It can attach to the wall using 2 small command strips.
I originally designed this hook to hang my Lucky Lucky “Weird Al” Autographed Glow-In-The-Dark Snorkel from the wall, but it is a nice hook and I figured that it would have other uses as well. There are 3 sizes and the only variation is…
These are all currently available results.
