9 models
The tab on the bottom of my Logitech C920 webcam is longer than the bezel of my Dell S2721QS LCD. I made this spacer so that the webcam doesn't overlap the screen area. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No…
Fits these wrenches , probably others too. Printed in PLA with a 0.6mm nozzle and PrusaSlicer's 0.4mm (draft) settings. If you haven't modified the default profile, this should result in 0.65mm extrusion width, which is conveniently half…
The stand that came with my USB microscope is very unstable. This adapter mounts the microscope on a standard ¼"-20 hex nut. Microscope: https://www.amazon.com/gp/product/B07DRGR6LX/ ¼"-20 hex nut: https://www.mcmaster.com/92673A113/ The…
I lost the head for my AmazonBasics tripod, so this is a replacement. You'll need one 1/4"-20 hex bolt, 1/2" long. You may need a shorter bolt depending on your camera. Slide the bolt into the slot, then use the insert to lock it in…
I replaced the controller board in my Monoprice Mini Delta with a BIGTREETECH SKR PICO V1.0 and had some trouble getting the optical endstops to work. I designed this mount for some Micro Limit Switches to replace the optical endstops.…
I wanted a way to keep my multimeter off my desk and this was the most convenient place to mount it. Uses 2x 4mm zip ties Printed in PETG with 0.4mm layers, but you do you.
I made these brackets to mount an aluminum rod for convenient wire spool storage underneath the shelves on my workbench. Each rod can hold 4-6 wire spools, depending on gauge. Hardware 2x Printed Part 1/2" x 12" Aluminum Rod M2.5…
Glue 2x 6mm googly eyes. https://www.amazon.com/Iooleem-1000pcs-Googly-Adhesive-Crafts/dp/B0BN1J5TW3 Printed in PLA with a 0.6mm nozzle, 0.15mm layers. Use a brim if it falls over during printing.
Print with 0.2mm layers in PETG I used 32x3mm magnets: https://www.amazon.com/gp/product/B076Z81891/
These are all currently available results.
