Counting matching models…
Nothing to be proud of here. Quick and dirty STL mashup in Tinkercad Massive thanks to Cornflakesninja and conanh for their design. https://www.thingiverse.com/thing:16274 https://www.thingiverse.com/thing:3730964 Currently printing, will…
According to Brompton there are 2x ways to replace the sleeve: Take it to Brompton service centre and hope they have appointments available in coming months… Buy £7 sleeve, £30 single purpose glue with 6month shelf life, 32mm reamer tool…
*** Please note this is fairly old “project” but could be useful to pick up from, also not anymore maintained so please feel free to “fork it” and call it your own (CC BY-AY) *** How to use Cura 2.3.1 with your daVinci Jr (This is a Mac…
Either you have broken original part or realised how rubbish original slider, this should be ultimate fix. In case your greenhouse is different please post your remix, I've included Sketchup file. Printed in Filamentive recycled rPLA and…
This is the wheel for Ikea Big Big Samla boxes. Had missing wheel when delivered so printed one I found instead, due to the big box weight when filled and layer lines being the weakest it obviously snapped. This design incorporates M5…
Thanks to phili76 for original design (and big ups for providing STEP files), unfortunately center hole for some of the steppers I have here were little too tight. I've simply increased centre hole (by 2mm in diameter) to 24mm to…
Quick remix of https://www.thingiverse.com/thing:3298390 No supports are needed for pegboard hooks with this design. To achieve this I've simply performed Z height cut. By doing so overall z height has been reduced. Pros - no supports,…
Back in 2015 I've bought Amazon Kindle Fire 7" (aka 5th) for my grandmother. Unfortunately we had number of issues which I've tried to solve with this stand design. List of the issues: microUSB orientation being confusing at the times,…
DO THIS ON YOUR OWN RISK!!! I'm not responsible if you manage to fry your printer, any parts or even your house. Use common sense when wiring and mounting things. Never leave printer going unattended. If you haven't done anything like…
Love these new Brompton Be Seen lights but I'm rocking Brooks seat so no mounting point for the rear light, also because I use under the seat bag I've designed seat post mount for it. Designed specifically for telescopic seat post but it…
Simply slides in at the angle. Print them out and slide them on at the angle (45degree at the thinest side curve) They should rest over the rubber feet of the router. Mark position on the wall, remove brackets and screw them to the wall…
Kossel Mini Revo Micro Mount Effector with Part Cooling and BL Touch Hardware Required 1x Revo Micro (designed for 129.3 spec) 1x 5010 Fan with shroud like this - https://www.amazon.co.uk/dp/B07L2WTH7H (NOT an affiliate link) 1x BL Touch…
Wasn't happy with original seat. I'm 196cm (6'5) so clearly it was too low. Seat itself was too "cushiony" for my liking Please be aware - seat post I'm using has fairly larger diameter (34mm) than average road bike seat post, please do…
Even in highest position oven was slightly lower than countertops on both sides. This foot simply adds 12.5mm to the hight, in my case enough to do the job with some wiggle room.
I find it easier to split them in half and simply sandwich together instead of dealing with supports on such a small part.
DIY heatbed for Jr. ***Yes you can buy silicone heaters and stick them to the bottom of the glass but usually that requires some drilling/cutting into the metal base of the bed to get wires routed through. With this solution you'll only…
Only tested on RAMPS modified Jr but should work on stock firmware as well, just ensure you adjust Z offset. This mount doesn't have place for hotend PCB, you'll need to relocate it if used with stock firmware. Purpose of this design is:…
After my Jr RAMPS conversion Jr gained SO much but lost one major feature it had - enclosure. So I've made a decision to restore my Jr to its "formal glory" With this mod there's no way going back because you'll need to modify (cut)…
Marlin 2.0.5.3 for E3D's BigBox machines. The current configuration is for BigBox Pro Dual Titan Hybrid variant (1x Bowden V6 + Titan, 1x Direct drive V6 + Titan and heated bed "Pro" variant) but can be easily amended for any other…
Use 8mm 5v rated Proximity Sensor (glass on aluminium bed might not work, recommend adding stainless steel sheet in between or use spring steel flex bed instead of glass as I do) Print the part Run through the M8x1 tap (it has thread…
Used generic “5050” 24v LED strip Hence Ultimaker Original is 19v 24v LED light is bright enough and not generating too much heat so part can be printed in PLA
!!! Obviously the easiest way to have Revo is to buy Revo 6 but Revo Micro is the future. Hypercube Quick Mount Revo Micro to v6 Aim of the design is to be able to switch back and forth between v6 and Revo Micro without configuration…
Before printing V3 fan mount please ensure that you don't have bed leveling probe screw mounts on the right hand side of your print head. If you do then please be aware that fan mount will not sit flush hence those screw mounts ar in the…
E3D Revo Micro mount for Ultimaker Original - Return Of The Kraken Hardware required: 1. Up to 4x Revo Micro hotends (more than 2x will require board upgrade or additional MCU like RAMPS if using Klipper firmware) 2. Same ammount of…
Remix of https://www.thingiverse.com/thing:599562 Original design was for so called Full Graphics LCD aka 12864 but I had to adopt it for classic 2004 LCD so called Smart Controller Through hole for the screwdriver (hex alien key) was…
!!! I have purchased 2x more Up Plus machines and one of them has slightly different (wider) hotend mounting point, if you have one of these please bare with me while I'm amending mounts to fit this variant. If you have 3rd variant or so…
Simple stacking feet to stack multiple Up Mini printers. Print in TPU to dampen vibrations aka noise or stick some rubber feet under if printing in hard material.
Azteeg X3L board is slightly modified variant of generic X3 board made by Panucatt for Deltaprintr machines specifically so generic X3 board definition will not work properly. Unfortunately X3L boards were too small of a run so they never…
Jiggly Pets Koala you can get from Sainsbury's and Argos here in UK has tendency to snap the foot if dropped or loved too much by younger child, and when foot is snapped there's no more silly walking action… Required 4x M3 6mm screws and…
If you use external spool holder and want to swap NFC tags much easier - this might be right solution for you. Also what's the point of keeping that bulky internal spool holder if it's not being used?! I tried to make it as nonintrusive…
Cooling performance I've found to be the same as with the original but noise levels are way down now. I've only printed with PLA so potentially higher hotted temperatures will make heatsink hotter therefore intake temperature is higher,…
Bought from AliExpress some 52mm lens filters and "action camera" to 52mm lens adapter. Turns out Yi Discovery has smaller lens ring than it's big brother 4K variant so I've designed very simple adapter ring. Due to press-fit assembly…
Have this "amazing" VTech Walker which you're unable to sell on eBay for some time now?! Have this plywood toy box which is being dragged around the room scratching floor surface?! Boom... Box Wheeler!!! I've only repurposed 4x wheels and…
I'm using this utensil pot as cutlery pot instead, while it's doable for knifes and kind of ok for forks and tb spoons it's way too deep for tea spoons and kids cutlery. So hello little risers. It's very simple and quick print (taller…
Old Victorian house should say a lot why I'm in need of these. Yes you can always prop it up with folded up cardboard but I decided to do it with some class :) Either way, Sketchup file included so you can produce required thickness foot.
Quick and dirty STL edit to extend it by 3mm hence 3mm / 2.85mm variant of Aero is 3mm taller for some reason, thanks E3D for consistancy. (In Prusa slicer multiplied and 1st cut at 18mm (kept top), 2nd cut at 21mm (kept bottom), aligned…
These are all currently available results.
