P
PrintablesPrintbymr
VESPA(ET3) FUEL TANK STRAINER TOOL 3D print model (PLA)
tool to remove fuel tap from vespa fuel tank Print instructions - will work with PLA! Increase perimeters until the parts is solid
- Downloads
- 113
- Likes
- 7
- Rating
- 5
All models
8 models
P
PrintablesPrintbymr
Bosch Indego S500 rear wheels with Alfa romeo hub cab
Wheel for lawnmover with hubcab that screws in Print instructions: see .3mf file Note: Make sure that the center is solid otherwise it will break! Remix of this model https://cults3d.com/en/3d-model/home/wheel-bosch-indego-350-400
- Downloads
- 100
- Likes
- 9
- Rating
- 5
P
PrintablesPrintbymr
Quick connect self leveling cupholder for Odder stroller
Self leveling cupholder that can be detached and stored in the front pocket on the strolled. Is made to fit Odder stroller Print instructions ( PLA & PETG suitable) Place the mount for the handle on the side and increase perimeter count…
- Downloads
- 92
- Likes
- 13
- Rating
- 0
P
PrintablesPrintbymr
Milwaukee M18 Battery adaptor for Falke
To make this work you have to take apart the Falke tool and get to the mainboard. There are 4x1,8mm hole so you can use filament as guide and glue it together or you can drill holes to fit screws. I used m4x40 bolt and cut off the excess.…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesPrintbymr
Door linkage clip for Fiat x1/9
The old clip broke when the door was disassembled for a fresh paint. Printet a replacement in PETG
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesPrintbymr
Gutterclip for christmas lights
Hang your christmas/haloween lights in 5 minutes. They will also last longer beacuse they are mounted under the gutter and are always dry.
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesPrintbymr
Mount for playboard on ikea söderhamn
Mounts so you can have a playboard/activity wall on the back of your couch without drilling or making holes in the couch Grips the top with the hooks and hold the buttom with printet clamps Screw the hooks to the plates with suitable…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesPrintbymr
Organsizer for gun locker - vasemode
Two holders one for 20 gauge shotgun is 100mm long one for riffels with a Ø28 barel is 50mm long Needs 3 magnets each - 5x5x3 capacity should be over 1kg. Print in vasemode with 0,4mm nozzle Prints in under 30minutes on my Ender 3 S1 The…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
These are all currently available results.