Counting matching models…
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
UPDATE - 29 September 2023: I've uploaded version 1.1 of the designs, all parts have some changes for easier printing. This means that all feet have build in print supports at the bottom. Also the rear left feet is now split into 2 parts:…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Remixed the https://www.printables.com/model/941851-second-desiccant-container-for-polymaker-polydryer since it was a bit rough to print. The circles were taking up a lot of time and the support for the upper overhang wasn't nice to have.…
Update 26 October 2023: back parts with Voron BOM parts added as well. Update 23 October 2023: I've added the back parts as well for all sizes to complete the looks. Schurter D12 inlet for now, Voron BOM options soon. To keep all the…
A simple but effective mount for a Logitech C920 to an extrusion of a 3D printer. The cam can be angled (see pictures for examples on a Voron 2.4r2 300) and is mounted with 2x M3 T-Nuts and 2x M3x8 bolts
A remix from https://www.printables.com/model/81104-filament-spool-wall-mount/ since i already had some commonly available 32mm (outer diameter) PVC pipes used for plumbing. These are cheap and widely available in Europe so the build is…
I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked…
4 simple sticks, ready to use for maintenance. For my Voron 2.4 i use it when working on belts, deracking the gantry, tensioning the belts etc. Just click them in place, tighten the bolts and it stays in place. No additional tools…
Made belt guards in style of the Flat Mesh Skirts to complement the skirts. When opening the files in your slicer, split the parts. For the inner part apply the following modifiers: Top Solid Layers: 0 Bottom Solid Layers: 0 Perimeters: 0…
A fullsize panel mod for the v0.2 with 100mm Tophat. I wanted to enclose my Voron as much as i can for printing ABS/ASA. Since i don’t use the tophat i choose to go fullsize panels with some mods already found online and a few adjustments…
I remixed the lids for The Filter to match the aesthetics of my printer better. Made the lids smooth and flat and made the openings round instead of hex-shaped. All 4 variants are included and fits the standard body of The Filter as found…
For the Flat Mesh Skirts for Voron 2.4 ( https://www.printables.com/model/608754-flat-mesh-skirt-voron-24-350300250mm ) i've created a way to mount the BTT PiTFT50 to the Flat Mesh Skirts. The DSI cable can be routed inside the base to…
Drop in replacement for the Flat Mesh Skirts when you use the keystones in the back. When opening the file in your slicer, split the parts. For the inner part apply the following modifiers: Top Solid Layers: 0 Bottom Solid Layers: 0…
Since my space is limited i created a vertical mount for the EBB USB Adapter Board. 1 piece print, no supports needed, only 4 M3x5x4 heat inserts. To be used with the following DIN rail mount:
Drop in replacement skirts in Flat Mesh style for the v0.2. This is designed after the design of TheJiral of his v2, Trident and v0.1 skirts. All skirts are modelled with the stock outer dimensions so they are a drop in replacement for…
Since i've changed from a Wowstick to an electric screwdriver i wasn't happy that i couldn't use my bits anymore because they are microbit. With this adapter you can put your microbits onto your regular bitholder. For a good fitment i've…
I wanted to stay as compact as possible, so i remixed the RockNRoll accent feet and HULA feet together. This way the RockNRoll is still usable and stable, without using an extra adapter to fit it on the v2.4r2
After making the Fraks Flexarm i was looking for a place to make it usable for me. I didn’t want to bolt it down on my desk but had a perfectly usable wall. Print without support, the Fraks can be placed in it the same way as you do with…
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
BOM 1x M5 T-nut/Rollin nut 1x M5x8 bolt 1x Microswitch (D2F-L) 1x JST-SH Female 2x M2x10 self tapping screw Cables for soldering the JST to the Microswitch Installation - Solder the cables to the JST connector - Push the JST in place and…
Since i wanted a more sturdy mount for the Logi C920 i made my own version. The back is open so that heat can dissipate better. Slots for the wire is also made so that you can nicely route the cable out the back, through the feet and into…
Alternative handle suitable for thicker panels. Handle is mounted on the printer frame instead of the door, allowing to be mounted regardless of the thickness of your panels. Motion is limited to 20 degrees and handle in closed state is…
My new steppers didn't had any strain relief and has a permanently attached cable. Since i want to preserve the cable as much as i can i made a strain relief. You need 2x M3x45 bolts to attach it to the steppers (original bolts probably…
When you use a gantry with rails on the inside of the Y extrusion the space on the bottom is available for something nicer. More (performance) toolheads are being designed without the use of nozzle LEDs. Mount your Daylight, Daylight XXL,…
These are all currently available results.
