Counting matching models…
Modified the distance of the mounting holes for the hotend, measured my as 6,9mm, the original project is 6,5mm which is not perfect as it needs a tight fit. Added also a version for heatinserts M3.
The main idea is from this design: https://www.thingiverse.com/thing:5277750 I cound not get the CAD files so i designed from scratch in Fusion360 and made use od a partially scan of the extruder mounted on the axis. It is devided into…
closed cable hole on top added 30x30 fan with mouning holes Now nicely closing all cables with the EBB36 mod on Stealthburner.
The camera shaft fit is tight, it should be. If too tight enlarge with 3mm drill bit. Printed from ABS with 0.2mm layer. Print which material You like.
Printed from ABS but also compatible with PLA and PET-G. Printed in the position like shown on picture does not requre any supports.
I purchased the Mustool 7-50X HD Microscope from Banggood. It works well but the focus distance for the LCD monitor is wrong and i printed an adapter to make the distance correct. I hope it can help many other with the same microsope too.…
A simple clip in wall mount for the Wuzhi ZK-1002M amplifier. Printed from ABS+, but PLA and other should work too. Printed without supports, the overhang is minimal.
Needed to cover a 51mm hole where the investor changed the decission and the hole need to be in different location. For scaling use the 100mm file. If You want 35mm just scale to 35% on X and Y, scale Z depending on the thickness You want.
Two part enclosure for Alix3d3 and Alix3d2 single board computer with Geode AMD CPU. Older boards but still working with Debian and AlpineLinux. I could not find any availible encosures anymore so decided to design and print them by self.…
Walksnail Avatar holder for 13,7mm alu profile, will post final installation picture soon.
You will need: Strado 3DVRG VRG Pro googles (see picture) LCD screens LS029B3SX04, i got them from ali https://www.aliexpress.com/item/1005003026932340.html Prefferably kapton tape for fixing together My frame printed in PLA or other, no…
I designed this mount as none other fit my requirements being so simple and fast to print, without any supports. Mounting with 4 screws to the shelf. Dimensions of the soldering station are 88 mm x 38,4 mm, i am not sure all that are…
Printed from PETG with 0.6mm nozzle. The card holders are: EAN (GTIN) 5903868401178
Visually inspired by this project: https://www.printables.com/model/1114713-emergency-stop-estop-for-thanos-amc-controller Diamerter for the the LEDs - 10mm Diameter for the E-STOP - 22mm Diamter for the Switch with LED - 19mm Mouning for…
Best print from PA, other materials may be okay. Little rework may be needed. Print in horizontal orientation with supports. 30% infill, 5 walls, 5 top/bottom layers.
These are all currently available results.
