Counting matching models…
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
This is the Goblin, a single shot break open Silly Shell fed foam blaster. It can fire any ammunition type that can fit in a Silly Shell; you'll get solid performance from multi-dart shells, up to over 200 fps out of a sniper shell. You…
This is the Rush. It's light, handy, smooth, and can reach up to 220. It uses less than a kilo of filament (even with the stock), can be printed within 24 hours, and uses simple and common hardware. It takes angled Talon magazines.…
Cheek rest for your Longshot, as the stock cheek weld is terrible. Acts as a stock block too. Print both pieces, open Longshot stock to furthest position, put pieces in, secure with three toy screws- standard Nerf style. Mirror for lefties.
This is the Springer Perilous. It is a long draw side-mag pump action threaded rod springer. It has linear rail in the prime. It has a quick swap spring cap, and uses 11" springs. It uses Talon mags. It is capable of achieving well over…
SLAB Mare's Leg kit- chopped stock pieces and large teardrop lever. Drop-in pieces, no hardware changes necessary. Silly's main SLAB files are found here: https://github.com/Sillybutts/SLAB
This is the Ogre, a pump action Mega XL revolver designed to be fired from the hip. It has a five shot capacity, and features quick swappable cylinder and spring. With PCAR in each chamber, you can shoot straight with MXL- it's…
Adjustable cheek riser for SLAB. Not ambidextrous- to make left handed, mirror everything except screw lock, locklugs and nut. Extended rail and ported muzzle, too. Only those parts included- for the full blaster by Sillybutts, go to:…
This is the Shrew! Rush, but the “sh” is in front of the “ru”. It's an 80mm draw pump action using straight Talon magazines. It's got a very nice trigger, PCAR or SCAR built in, quick swap spring cap, and is quite rigid due to dovetail…
This is a printable version of the old Planetstrike bastion for Warhammer 40k. The Planetstrike book, as well as a few White Dwarfs and other rules publications, showed massive fortresses built from multiple bastion kits- but at $60 each,…
This is a furniture kit for Cynthia by Sillybutts. It includes a birdshead grip, thumbhole stock filler, curvy mag chin piece, curvier mag release, and a trigger guard with a spur, as well as a foregrip. Additionally, an extended top rail…
This is Falx! Falx is a medium-draw bearing-guided pump action springer- using laser cut and bent sheet metal plates for the body and structure of the blaster. It uses printed trunnions inside the sheet metal body to hold the internal…
This is a foregrip for picatinny rail. Comfy, low profile, low hardware. 2x MXx30s, 2x M3 hex nuts. Good comfy pump grip for Nerf homemades. Print at 4 walls, 20 percent infill, as oriented, no supports.
This is a three piece picatinny rail vertical foregrip. The core sections are printed flat, and then a sleeve section secures it all together. Strong enough for pump grip use! Needs 2x M3x25, 2x M3x8, and 2x M3 hex nuts.
This is the Booster, a double plunger pull-to-prime Nerf pistol with swappable barrels. It uses two Caliburn plunger tubes, and either two 6" or two 5.5" segments of K25. It has separate triggers for each plunger tube, and with the…
This is the FLP-03, a Flycore based Nerf blaster. It uses straight Talon magazines, and is compatible with Hurricane wheels (and I believe FTW wheels, but have not tested). The battery box is approximately 30mmx30mmx100mm. You will need:…
Super Spamf folding stock. You'll need the original Spamf kit, the Super Spamf kit, and then Telcon's top rail set. One of the rear pieces for the top rail kit is replaced by the adapter piece here- default, it folds to the left. Mirror…
Unjamming rod. Print as many sections as you want. Tie paracord through it whilst all segments are folded up. Knot both ends. Unfold, slide pieces to interlock. Pull paracord tight through end slot- there ya go. Rod.
Update 8/26/26: Tighter magwells and shroud for better prime detent. This is Terminus. It's got two barrels, two plunger tubes, two triggers, and uses two magazines. Terminus is the absolute best springer for under 250, if you don't mind…
This is a picatinny rail quick detach stock. You'll need 2x M3x25 screws, 7x M3x8 screws, and 2x small springs (10-15mmish, think mechanical pencil springs. Rush or Crush catch or mag release springs would be perfect.)
Basic flip-up sights for Picatinny rail, meant for Nerf. Down- open sights. Up- aperture. Uses a piece of filament as a hinge pin and 4-40 screws for mounting to the rail. The sight pieces should be a very very tight press fit. Press them…
MOLLE compatible printable holster for the Goblin foam dart blaster. Fits standard and target versions. Hardware needed- 2x 6x7mm ball detents for retention. Secure holster to gear with a MOLLE stick, any of the common ones should work.…
Use these pieces for a short front end on your MHP LMG. Big thanks to MHP for his awesome blaster and for help with this version!
Onager is a 34cm draw foam dart blaster. It's pump action and is carried over the shoulder; it is fed from a top mounted Talon magazine. Using two K25 springs end to end, it can achieve close to 400 fps. The actual FPS ceiling of this…
FTAW//prime is a sci-fi reupload of the 31K-L foam dart blaster by MisplacedMoose, using his cutting tools. Parts are in print orientation, all the small bits and the turnaround at 100 percent infill, the rest at 5 walls 20 percent.…
Remixed for flats to print on, stronger orientation, and screw holes for 2x m3x25 screws and hex nuts. Quick and dirty.
These are all currently available results.
