Counting matching models…
Most of the modular sand casting molds are difficult to cast, and machine. This one is very easy to sand cast 2 Part mold (use a pattern board, or pins to align the two halves) 1 Mold will create half the cast (eg a cope or a drag though…
This is an update of a Rycote Lyre adapter for the Sony FX6 but with a friction fit rather than a nut design ( https://www.thingiverse.com/thing:4784464 ). There were some issues with the first design, I found that: The nuts could come…
This is a cleaning Jig for 608 Bearings. It has 2 parts: Jig: For holding the 608 bearing and cleaning fluid Rod: Attach one end to your drill and the tapered end into the 608 bearing Use: I had a bunch of cheap 608 Bearings that no…
This sand-casting pattern has various fine details to help determine what wort of “resolution” you will be able to cast using a 3D printed pattern with your sand and technique. The opening of the squares ranges from 10mm to 0.5m as marked…
This is a horizontal holder for the Ubiquiti UniFi Unifi UAP-HD-IW so it can be used as a desktop switch and access point instead of wall mounting and gives you: easy access to the 4 x Network ports non slip feet (if you use the o-rings,…
FWIW - I printed this in Nylon (Dupont Zytel) as I'm hoping it will be both tough and chemical resistant which will be both needed on a Lathe.
Super Simple Cable Clip - You can scale it in the slicer to any size you need (including individual dimensions, on X Y or Z as required). The picture shows it at 200%, 100%, and 50%. Print instructions Category: Organization Summary Super…
This casting system as two main components, a: Pouring Basin (reusable) D20 Shell Mold (sacrificial chip off) The resin used is a high heat tolerance resin specifically designed for metal casting called ThermaCast by Monocure3D. You CAN…
All credit to Olfoundryman over on YouTube for the idea. If you have not seen his videos, then they are worth a look if you want to see some very valuable trips on metal casting. This is my "Version 2" of the Lugs/Ears for metal casting…
This design is an improved (stronger and longer) version. It can take a bit of "wiggling" to get the Lyre into or out of the holder... but is is very secure, has plenty of clearance, and is much easier to print. Print and Assembly: Print…
This casting system as two main components, a: Pouring Basin (reusable) Mold Blank (for customization) The resin used is a high heat tolerance resin specifically designed for metal casting called ThermaCast by Monocure3D. You CAN NOT use…
The Trundhold Sun Chariot is a masterpiece of Bronze Age artistry. I am attempting to recreate this 3,500 artifact in a couple of stages that I'm documenting on YouTube if you want to follow along. I'm posting the files on the request of…
These sand casting patterns have varying degrees of draft from 1 to 10 degrees. They are designed to fit into a smaller flask like my “Easy Cast Flask”. Like with 3D test patterns, the aim of these is to help calibrate your: Pattern…
It's just a fidget spinner but has draft all the way around and in the center hole. Here are my casting notes. I cast it as a spilt pattern in old Petrobond. No gating, just a Sprue/Feeder and one end and a Feeder at the other. Sand was…
I added an Electronic Lead Screw (ELS) to my Mini Lathe and as a part of that project I needed brackets to bolt the Encoder and two NEMA Stepper motors to the lathe. I printed patterns that I used for sand casting the two NEMA brackets in…
These are all currently available results.
