Counting matching models…
Disclaimer: Please ignore the bad print quality in both the photos. Bargain basement silk filament kept clogging/partially clogging the nozzle in first print, in second print the parts fan died causing warping, and ironing the surface…
I made this using a parametric customizer that has since gone MIA. I noticed nothing like it exists on the major model repositories, so I am uploading it here. It is a 1x4 lego compatible gear rack.
Sanding Band holders of 6 Large, 2 Medium, 6 Small sizes. I shortened it by 1 unit to allow more flexibility of vertical or horizontal orientation in the dremel box, and because medium sanding bands are rarely included in kits. Re-added…
Added magnet holes. Magnet holes have square bridges for better bridging and no droopy rings. Printed at low resolution with: PLA+ 0.6mm Nozzle .28 Layer Height High speed No Ironing
Requested by Zitheran on Discord. Magnet holes use straight bridging method and should be friction fit. https://www.printables.com/model/379547-gridfinity-magnet-holes-model-for-example-and-tink
Added 4 magnet holes to full socket. Magnet holes have square bridges for better bridging and no droopy rings. Shortened the extra socket from original model so that it can fit in the modified toolbox upper , and also saves on filament.…
Reduces filament usage and pushes grid all the way to front edge. Back edge has partial slots approximately 36mm (of 42mm) in size. This allows SCAD partial bins to fit and room for parts that hang outside of the GF size. The original…
Colettes are in 2 groups of 3 connected by subtle line pattern, and 2 individual holes. 14mm overall height. Pictured printed in Silk PLA at low resolution: .6mm nozzle, .28mm layer height, high speed, no ironing.
Vase Mode Lampshade for “Spiralize Outer Contour” (Cura) Hollow Lampshade in .8mm wall to match original 36mm base (Most common LED tea lights) 30mm base (Most common submersible LED tea lights) 42mm base (largest that can be made, just…
Added magnet holes. Magnet holes have square bridges for better bridging and no droopy rings. Added two slots for the plastic nuts for the end of the dremel, or cutoff wheels etc. Was going to add stacking top lip, but forgot. Oh well.…
Fixed interior geometry. Added magnet holes. Magnet holes have square bridges for better bridging and no droopy rings. Printed at low resolution with: PLA+ 0.6mm Nozzle .28 Layer Height High speed No Ironing
At regular intervals (no less than desired layer height), you add a square rotated 45 degrees touching the edges. This causes slicers to draw straight lines across the holes, avoiding problems like the infamous “drooping rings” present in…
There are two versions. The regular version has .45 tolerance for the vertical hex shafts because they are greatly affected by lack of tuning and/or lack of Linear Advance. The LA version has .2 tolerance for tuned machines running Linear…
This has a 5mm ID for the frame side of the hinge.
These are all currently available results.
