Counting matching models…
I designed these zip tie mounts as a practice project in Fusion 360 . Three versions included: One for glue or tape Two for screw mounting Square version comes in two sizes: 35 mm and 26 mm Printing Notes Print “by object” to get the best…
A small helpers for sushi sticks . They work with a premium sticks and cheap "to go" ones. Printing Notes Print in PETG (best flexibility) but PLA will work too. Try with auto supports in holes for sticks. Quick, simple, and practical…
I wanted to make a replacement for 170 pliers cover for transport. Print in petg/TPU for flexibility.
The original-design blue tokens were difficult to pick up, so all tokens in this set have been redesigned to be double-sided for easier handling. All tokens are mirrored and optimized for clean, reliable printing. They have been…
This is a NATO rail mount for Sony FX30/FX3 cameras , inspired by SmallRig designs. Two versions are included: Standard Offset – allows use of the hot shoe while mounted Hardware & Printing Notes Designed to fit a 3/8" screw You can add a…
These are 3D-modelled tokens to replace the originals in Harmonies . Same size as the originals Print without supports for solid, clean results Original numbers to check if you still have a set: 23 Blue Tokens 23 Gray Tokens 21 Brown…
I designed these sorting trays to be as light as possible and to store them in one piece . Openings are really narrow - from 12 to 20mm - to best fit gaps in plastic cases you sort your screws/nuts in. Three versions included - each for…
This set includes animals designed for the New York Zoo board game , with two printing options: Original/Flat version – standard orientation, works well for small quantities The flat penguin also has a version for adding a white belly…
Connected 10 Stitch Markers with a tree that can be easily disattached and can be reomved from plate as a one piece. Print with PLA or PETG (better for flex prints).
A small, lightweight clip perfect for sealing bags or spice packets — under 4 g of filament. Printing Notes Print in PLA or PETG No supports required Quick, simple, and practical little model
These wall mounts are designed to securely hold cables or small pipes. Sizes available: 13, 16, 18, 20, 22, 25, 28, 32 mm Two lengths: 30 mm and 40 mm Printing orientation: Can be printed on their side or lying flat — lying flat gives the…
Small Printbed Cleaner for use with Cotton Pads . Prints flat without supports in PETG or PLA - easy and convenient way to clean buildplate. EDIT: Added a more convex version to make cotton pad stick out easier.
This is a protective hot shoe cover that fits Canon EOS R/RF new hotshoe and standard DSLR hot shoes , helping to protect the pins from rain or dust . Files Included R50 – fits Multi Interface hot shoe (like R8 R50 and newer models. R100…
These are premium replacement pieces for the board game Finspan , including fish, fishes, and eggs . I designed them to be easy to print , even on single-color printers . Single fish & eggs: double-sided for best appearance Group pieces:…
This is a card divider that fits Pokemon Cards. It is a fairly light model - around 5-6g of material. Files Included Clean – just a clean divider Pokeball – with a Pokeball logo cut Printing Notes Print in PLA or PETG for best results
These are replacement meeples for the board game Finspan , designed in case you ever lose one (I had one of mine broken in transport. Vertical version can be printed without supports for easy, clean printing Simple, durable design for…
This is my own redesigned mount for Hollyland devices. The original aluminum version isn’t very sturdy, so I added extra material to improve durability while keeping it lightweight — only 4.5 g of filament with 20% infill . Hollyland…
This set includes replacement meeples for Carcassonne Amazonas , featuring two new designs : Boat – print on its side for best results House – print in normal position Both designs work without supports , making them quick and easy to…
I designed this cube holder to neatly store spirits and animal cubes in their original space in the game box . Keeps pieces organized and prevents them from moving around Fits the original box layout perfectly Printing Notes Print in PLA…
I designed some upgrades for Morten’s 4x5 camera , inspired by a friend’s request. Features Groundglass Holder & Viewing Hood Compatible with Toyo Viewing Hood mounts . Protects the groundglass better No glue required M3x8 screws needed…
Full insert for Harmonies by Libellud boardgame with all add-ons. There is still place for more cards :) Tomorrow will do a full photoshoot, print in PLA, add supports for tokens basket.
I designed this organizer from scratch as a way to practice caliper measurements and 3D modeling . Radial front design makes it easier to remove pieces Spirits compartment now has a larger space for easier handling Printing Notes PLA or…
This is a compact Acme-style animation peg bar , designed to be as small and efficient as possible. Smallest version : Fits 4 bars on a Prusa Mini plate at once Classroom-friendly version : On a Prusa i3, you can print 20+ at a time…
Sony cameras feature a larger mic holder than most shotgun microphones, so an adapter is needed to keep your mic securely in place. Material options: PLA or PETG, with TPU recommended for the best fit and grip Two versions included: RODE…
I designed two wax seal signets : one with a heart and one with a compass rose , perfect for envelopes or letters. Printing Notes Print “seal down” — printing “seal up with supports” can distort the ring. Wax takes longer to cool down…
A small SD / SDXC card case that folds like a book. Prints easy and gets the job done - two cards have a case and you can check what's on them through a window. Printing Notes Print in PLA or PETG No supports! 0.15-0.20mm layer Quick,…
This is a protective hot shoe cover that fits Sony Multi Interface and standard DSLR hot shoes , helping to protect the pins from rain or dust . Files Included Sony – fits Multi Interface hot shoe. Print with supports on the build plate…
I designed three rings : one clean, one with a heart and one with a round stone , perfect in you are in need and don't have time - they print around 5 minutes! Printing Notes any kind of filament - you can go with silk/metallic ones for…
This Wingspan Player tokens are designed for you to print in any color you like , making it more personalized for you - I also added a cube to replace if you lose original ones. Designed for 8x8mm bottom plate (as original cube size) but…
This is a Melitta 100 coffee filter holder designed specifically for the AromaBoy coffee maker. You can store a full stack of filters inside — Melitta sells them in packs of 40 , and they fit perfectly. The AromaBoy is Melitta’s smallest…
A small Nintendo GameCard Wallet that folds like a book. Prints easy and gets the job done - you can take 4 games with you (3 in wallet, one in console) and you can check titles through a window . Printing Notes Print in PLA or PETG No…
I wanted to make a replacement rubber feet for our company's Ideapads 3 series laptops. Print in TPU for flexibility.
These spigot adapters are best for light lighting fixtures I would recommend 1kg max ) - for example Godox S30 or some small panel lights. Students lost these all the time so I made a model not to buy one every week. Files Included Mirror…
I wanted to make these wall mounts as light as possible and printed without supports. They are designed to securely hold cables or small pipes. Sizes available: 13, 16, 18, 20, 22, 25, 28, 32 mm Printing orientation: Can be printed on…
This is a replacement fader knob for the Agat Eurosystem Alfa-48 console. Works with all Alfa consoles Optional: add a color bar using CA glue for easy identification Printing Notes PLA or PETG recommended for durability Simple design,…
These are 3D-printed tokens to replace the original paper ones in Wingspan . Same size as the originals Print without supports for solid, clean results Includes a cameo appearance of the Finspan fish — a fun nod to another game!…
I designed these door stoppers as a practice project in Fusion 360 . Two versions included: One for 10 dregrees angle - for about 15mm gap Two for 15 dregrees angle - for about 22mm gap Printing Notes PLA or PETG recommended for…
This board game insert is designed for Wingspan Asia , making it easier to keep all pieces organized in the original box . looked up inserts posted on Printables and none filled the box to the top - I like to use inserts without covers.…
A Rode DS1 XLR Clips replacement if you lose original ones - or want a different color on your stand. There are two models to print - bottom large and top small one (they differ a little in design) Printing Notes Print in PLA or PETG No…
I based idea for this "half-insert" on Harmonies - you don't need to make a full insert if tiles are in a bag :) It stores all items (entrance tiles, goal tiles, Jeep mepples, turn marker and completion markers). Printing Notes Prints…
This is a replacement gearplate for the SimJack H-Shifter , redesigned for added durability . Original acrylic plates were prone to breaking, especially when accidentally shifting into reverse Scanned the original plate and reinforced one…
A small SD / SDXC card case that folds like a book. Prints easy and gets the job done - two cards have a case and you can check what's on them through a window. There are two versions - with cards in one side of the book or center (better…
This is a replacement retention clip for the Krause Combi-Plan 4x5 film processing tank , designed to replace the original, brittle clip . Printing Notes Orientation: Print on its side for best strength and fit Material: Prusament PETG (I…
This Wingspan Asia Duet tokens are designed for you to print in any color you like , making it more personalized for you - or to replace if you lose some. Printing Notes PLA or PETG - cheapest and good result - I think every filament will…
I designed this insert for Micro Cosmos to help keep add-on organized in the original box . Original box had space for the add-on — now it’s optimized for easy storage Includes print quantities based on number of players × 4 pieces…
This is a replacement lever for the Manfrotto 501HDV and 503HDV tripod heads. I designed this after my original lever broke — a cost-effective alternative to buying from Manfrotto Italy Two versions included: Simplified top – easier to…
If you lost original case or wanted a more rugged one - Flir One Thermal Camera Case is for you . Works for all USB port versions. Printing Notes Print in PETG/PCTG for best results 3/4 walls and 20+% infill for best durability prints…
These strobe flash stands are replacements if you lose original ones or want to tape them to objects and don't think original needs cleaning. Students lost these all the time so I made a model not to buy one every week. Files Included…
I remixed Mycelia Organizer / Inlay with cutouts for easy opening. Original boxes locked and were harder to pry open.
These Wingspan Hummingbird replacement Meeples are designed for you to print in any color you like , making it more personalized for you - I made them from scratch and they differ a little from original ones. Tray is not to "shuffle" your…
Harmonies Crescendo addon small insert (Ostoja Rozkwit in Poland). Only for 3 sets of cubes (new are whisper cubes ). I will be making a full insert to put all addons in one box next week.
Melitta Aromafresh Coffee maker replacement lid. Printing Notes Printed on Prusa Mini - you have to turn it 45 degrees to fit on A1 Mini/Prusa Mini Material: PLA Silk Designed entirely in TinkerCad , using analog measurements .
Pokeman Cards Dice Box (7 pieces- 6 small and one standard sized). Uses two 6x2 magnets. PLA works great.
This is a replacement screen holder adapter for the FeelWORLD LUT11S monitor . I lost one of the original adapters, so I designed a replacement myself. The part was measured from the remaining original (black) adapter and modeled in…
These follow focus wheels are designed for use with a Pololu 5mm adapter . Intended for use on a DFMoco by Dragonframe setup Compatible with a stepper motor for precise control Printing Notes PLA or PETG recommended for durability Print…
I designed this lens adapter for the Cosmos Camera based on Morten Kolve’s front design , allowing the use of other lenses . Requires a front H035 adapter for your Copal shutter Original design reference: Morten Kolve 3D Designs Printing…
This board game insert is designed for Pocket Mars , making it easier to keep all pieces organized in the original box . No need to dig through zip bags — everything fits neatly in place Keeps tokens and other components secure and ready…
If you have a fence with 40x60 posts this water dispenser is for you! A friend asked me because he saw a round one but for different posts so I made a new version. Printing Notes Print in PETG/ABS/ASA 4+ walls for best water resistance…
I wanted to make a cleat model to train friends in knots before yachting experience . Best to tryout with ropes up to 6mm . You can use them as hangers at home - there is a spacer model to drill holes for 3+ cleats in one line. All…
After my tripod fell over, I needed to replace both knobs . Instead of buying the full Tilt/Pan Control Crank , I designed this replacement knob . The original knob is round, but I made this version easier to print Requires a 4 mm drill…
This is a Nintendo Switch GameCard Stand that fits Switch 1 and 2 games . Files Included Standard – just a stand with vertical card inserts 10 degrees - added a 10 degree draft to better show gamecards (easier to read titles) Printing…
A small, lightweight sushi sticks stand - not to put your sticks on the table. Printing Notes Print in PLA or PETG No supports required Quick, simple, and practical little model
I made a holder for a Printbed Cleaner. It need three 8x2 or 6x3 magnets. Print with “supports everywhere” for best results.
Cascadia Pine Cone tokens - can also work as Wyrmspan eggs . Print in PLA/PETG, easy to print model. I am starting to model in Blender and have new challenges :)
These hanger expanders are designed to securely hold shirts on a second hanger. There are two versions: standard than goes through a hook and a version cut from the side to easy add-on of new expanders without moving anything in a closet.…
AMS Lite Wall Mount Distancer - not to hit wall with spools . Original print was too short - I got this knowledge after printing and putting it on a wall. It was easier to make a distancer than to print it once more in a longer version.
This Gaffer/Electric Tape Hook for Plywood shelves was designed to help manage space while working on new projects. It can be mounted on 18mm plywood (I can add other sizes if needed) with one screw (but works okay without screwing it to…
This board game insert remix is designed for Wingspan Asia AND Europe in one box, making it easier to keep all pieces organized in the original box . I love Asia version but if you play it more often using just asian birds it makes game…
This board game insert is designed for UnderQuest with non-sleeved cards, making it easier to keep all pieces organized in the original box . I made a "misc box" bigger for now because there is an expansion on the way - maybe it will fit…
Replacement Wedges 035WDG for Manfrotto Super Clamp 035. They are to replace always lost/misplaced wedges that are supposed to be stored near securing screw. Print in PETG/ABS/ASA.
I designed these PrimaLuna ProLogue Premium EL-34 Remote Bumpers because original ones disintegrated. Printing Notes Print “by object” to get the best effect Black TPU reminds original orings, you can go with any color you like No…
This is a glass holder for multiplane (stop motion animation). Animators use these to put multi glass sheets and animate on a few planes. Print with PETG/PLA - abything better would be an overkill.
Oppo / OnePlus Watch 3/3 Pro/2/1 Charger Case - to fit your charger and not to lose it. My friend cannot find hers in the apartment. Now you can attach your to a keyring.
Manfrotto R400 locking pin - we lost one lock when it "jumped" out while replacing articulating knob. Print in PETG for better flex than PLA.
I designed this Mark Roberts Motion Control SFH30 Bumper to replace a lost one on a SFH30 rail. It goes with M3 screw in the middle to screw it in place, best to print in TPU or PEBA but I think PETG would work if you don't have anything…
Manfrotto R400 replacement knob. My students broke articulated knob and wanted to make more rigid one (in 3rd picture there is one in the out of focus). Print in PETG, original screw fits great.
Toaster handle - for moving bread into a toaster. My collegue broke his and I modelled new one. Print in PETG/ABS or PLA-HT - should live longer with toaster temperatures.
Clear retro version of Shifter Knob for Thrustmaster Contest. Print without supports, works just fine!
These are all currently available results.
