Counting matching models…
I needed a quick couple of SD card/SDcard cases the other day and downloaded/printed Rod's SD Card Holder remix of guytas's SD card labelling case - both are great models. However, I was looking for something a little bit smaller.…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Replacement “pie” and wedges for trivial pursuit. I don't have any pink filament, so I just used purple instead. The “pie” color doesn't matter - so go nuts w/ gold, galaxy silver, glow in the dark, lipstick red, whatever. 100% compatible…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
Nothing complex - simple signs with a single color change to label my trash & recycle bins. House guests get confused seeing 2 trash cans, so this helps them out. Turn on “Detect Thin Walls” to fix the print error I had w/ the trash lid…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Customizable medals using OpenSCAD (100% free to download and use). Choose 6 different medals (blank, 1st through 5th place). Add up to 3 lines of text and easily adjust their spacing and placement. One layer change at 3.2mm - pick…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A remix of my remix - a simple SDCard/SD Card case to help you stay organized. Although I really like the label “flag” a lot of folks thought it was superfluous, so here is a version without the flag. Nice and minimal and will still…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Introducing the PretzelTrap mouse trap. As the weather turns cold and the holidays come upon us, mice and other rodents make their way indoors in search of shelter and food. Keep these often disease carrying unwanted pests from making…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
Simple Batman logo fridge magnet. The wings are tapered so you push on one side or the other to more easily pull the magnet off the fridge. I printed in black PLA, either .2 or .15mm layer height. Best if you print it face down (holes up)…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Simple Archimedes spiral extruder visualizer. Color change at 1mm level. Glue/use 3x 8x2mm magnets (or 2x 8x3mm magnets) on the back in the recessed circle. Print in PETG/ABS if you have an enclosure, otherwise it will likely warp from…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Yubikey USB key template. I've tried to model this to very exacting specifications. I would GREATLY appreciate any feedback that anybody has where this doesn't match a Yubikey Neo (I know I need to round off some edges by the USB pins).
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Why simply reproduce something when you can make it a little better? Classic pie token and wedges for Trivial Pursuit, but 25% bigger and the wedges now have a “flag” making them much easier to insert/remove - helpful if you have any…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
Simple LED diffuser for GU10 LED lights . I have these in my kitchen and although I love the LED lights, they are not diffuse enough. IMPORTANT: Print only 2 bottom layers and 1 top layer, or it will be too thick and light will not pass…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Spiral illusion 45 record RPM adapter. Printed at .1mm layer depth with a color change at 10mm. In PrusaSlicer, Under Filament Settings → Cooling Threshholds → Min print speed (may need to turn on “Advanced” mode) - set to 5 mm/s to get…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Not happy with the metal versions (they scratch anything else in my pocket), I decided to design and print my own thin/slim wallet. Myself and one of my best friends have been using this wallet for many years now and haven't even needed…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Simple to print (ABS suggested due to heat) for the Mac Mini 2012 edition to allow for extra air flow under the unit. I find during intensive work (video conversions especially) the bottom of the unit gets very hot. I have a fan nearby,…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
I have a 100+ year old house, which is constantly, slightly, shifting around. This print fixes a common problem, allowing you to extend out your latch for your screen/storm door from the door frame if it does not latch. Customizable in…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I own several of these WiFi IR control hubs and have them spread throughout the house. I needed a way to wall mount them, yet still be able to see the indicator light if needed. Micro USB connector on one side (for power) and the…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Extrusion visualizer/indicator in the style of a reel-to-reel (or perhaps filament spool). Print either the reel3 or reel6 file in one color and the tape in another color. Superglue the parts together and then glue 2 6x2mm magnets to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Simple LCD cover inspired by others available, but with a small window to view the e stimated t ime r emaining (ETR) or ETC ( e st. t ime until filament c hange). I'm typically looking down on my printer, so there's a slight angled cutout…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Lav Lifter toilet seat handle in 2 new sizes - small and mini - pick the size that works best for you! Simple handle to attach to your toilet seat so you can easily raise/lower the seat without having to touch the actual seat itself. I…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Remix of RT3D 's Wire Cutter Wall Mount to instead hang on a plexiglass wall of a Lack enclosure. Print with supports (as shown in the images), remove the supports and then gently push on the plexiglass from the inside of the enclosure…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Simple replacement clasp for Akro-Mils multi-compartment tool storage. I've had two of these for years and years. Lost one of the clasps some time ago and the rest are just getting worn down, so time for new ones. I toyed around quite a…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Just a scaled up version of RT3D 's Magigoo holder so it can hold a bottle of Layerneer Bed Weld . I just used some slightly bigger screws I had laying around. Printed in PLA. I think both products are excellent - make sure to go and…
Print approx. €2.82–€3.44 excl. taxPreliminary estimate for one variant
Handy all-weather sign to print and attach (I just used some packing tape) to any area/table you may have outside your home for contact-less food delivery when sick (or in a COVID hot spot). I live in cold temps and this has survived two…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
My take on a Printables logo extruder visualizer. Print with a color change at height 1.2mm and attach 3x 8x2mm magnets (or 2x 8x3mm magnets) to the round area on the back. Print in PETG/ABS if you use an enclosure, otherwise a thin print…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This remote holder is for the Haier AC model ESA3089. The factory remote is poorly designed in that the 3 middle buttons feel the same when you're correctly holding the remote or holding it backwards (pointing it towards yourself). This…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Today in the mail I received a set of 2 automatic drink dispensers . Unfortunately, the trigger on one of the units arrived broken. I could have contacted Amazon, returned them, bought new ones, etc, blah, blah - but we don't do that in…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Although there are several models available on another site… I found them all to be unnecessarily too big and complex. Taking inspiration from Area51 's nice and minimal mount for Makita batteries, I set out to design something sturdy and…
Simple cable ties - print up a set in TPU/vinyl and organize away. 3 sizes included here, but can make any size you want by editing the OpenSCAD file. The OpenSCAD file also has easy Customizer controls for hook count and density.
UPDATE: 2022-05-13 - I've updated this model to include 2 smaller sizes. See the “remix” section or click here: https://www.printables.com/model/205243-lav-lifter-12-dont-touch-the-seat Simple handle to attach to your toilet seat so you…
UPDATE 2022-05-27: Updated version here - v1.1. Slightly larger knob and room for a small magnet so you can more easily keep track of it. Simple LCD cover inspired by others available, but with a small window to view the e stimated t ime…
You will need 18 6x2mm magnets (and make sure you get their direction correct when gluing them in) to hold everything together and to make the base magnetic. Edit w/ OpenSCAD, editing $row1 and $row2. And print 2 copies of the nameplate…
Create and print the perfect parts tray for your next project! Open in OpenSCAD and use the Customizer to select rows, columns, width, length, and height.
Print in TPU/Flexible filament. There's a “test” unit of just 3 bit holders to print and test to make sure the fit is correct before you print the larger version. There are holes to view the bit size as well as small “nubs” to hold the…
My buddy was traveling and asked me to make a quick lanyard for his Uwell Caliburn G2. Not all nice and rounded, but it has open ports for the air vents and USB-C port on the bottom (and access to the charge light). Quick and dirty, but…
Replacement drive rail for the Synology D6 drive trays. Not sure how I lost mine, but I have them missing from 2 of my trays. I printed in ABS, although I don't think heat/warping will really be a problem, but I'd rather be safe.
I needed a wire winder quick for some low-grade speaker wire along with some other wire that I had, so I whipped up a customizable wire winder/holder. Designed to be strong, a little flexible, and quick to print. Download all of the .scad…
Very simple model to print a ramped shim, easy to print and put under a refrigerator foot to level it out. Simply edit the .scad file for your needs (parameters are right near the top) and print the size you need. They print quick and…
This is my solution to controlling the lighting and fans in my enclosure. My parts: 4-channel 12V USB Control Switch Relay Module 10pc 2.0 USB-A breakout boards (only need 4, though) Adjustable power supply converter 12volt power supply…
Create and print the perfect parts tray for your next project! Open in OpenSCAD and use the Customizer to select rows, columns, width, length, and height. Can turn tray numbers on/off and/or adding magnets of selectable sizes and…
I bought some nice cleaning pads (meant for nail polish remover) that I use when cleaning up electronics/soldering flux and wanted a nice, simple holder for the pads. Holds two stacks of the cloths I bought (60mm x 40mm in size). Printed…
Printables logo in OpenSCAD. Customizer available for X/Y and Z scaling. Not really meant for printing (although you certainly can - will likely slice into 2 separate objects). Meant to be available via OpenSCAD to import/use in other…
Collection of Lack enclosure tool holders that clip onto the plexiglass (works best on the sides and back - not on the doors). Can be used for cutters, scrapers, pliers, screwdrivers, brushes, etc. Quick and easy print (with supports!).…
3 different models - each is different as to what the “other” side mount is. I'm using a 4mm bolt/nut, but have included models for a 3mm bolt/nut or a second ¼" bolt. The other side is always a ¼", as that is the standard size for camera…
The adjustment strap on my trusty Sennheiser HD 475 headphones broke after many, many, years of use. Was about to cry before I realized I could just print a replacement in TPU/vinyl!. Works perfectly! It takes a little work to get the…
I recently purchased a USB microscope that came with an arm attached to a small base. This does not suit my purposes, but I noticed that the focusing arm mount “bolt” was the same size as my microphone mount. So, I whipped this up quick…
Couldn't find anything at the hardware stores/online that matched what I wanted, so designed my own. Printed in PLA and then used ¼" brass inserts with bolts and washers to mount. Brass inserts - https://a.co/d/8AV56eU Washers -…
My nephew set up a groups of lights in his room to be controlled by remote - very ingenious! He had a remote by his bed, but also wanted a remote located at the traditional light switch location. So, I quickly designed this and his dad…
The rocker switch on our ice maker that indicated whether water is on (ice and water) or off (just ice) was worn away, making it very difficult to read. This was a quick print to solve the issue. I attached it with two 3M Command strips,…
I liked the simplicity of Jumphrey_1982140 Echo Pop wall mount , but the base/bottom was only a few milometers thick. I edited in PrusaSlicer to thicken up the base an extra few mm so it is more rigid.
Remix of HGsHobby_233885 's Toilet Cleaner Tablet Holder cover model. Theirs is for the 75mm version of the Toilet Cleaner Tablet Holder , but I have couple of the 80mm versions printed. This was just a simple re-scale in PrusaSlicer,…
These are all currently available results.
