Counting matching models…
This is a portable container for adhesive bandages with a snapping lid. The inside dimensions are 17×32×90 mm. It’s compact and easy to carry, making it great for outdoor activities, hiking, camping, travel, or keeping in your car (don't…
This is a small storage box for small parts with a division in the middle. The lid is hinged and it snaps closed. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different…
This is a desk organizer/holder for USB flash drives and microSD cards. Takes up to 8 flash drives and 5 microSD cards. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a…
Summary These printable filament swatches work as both physical color and material samples and smart RFID tags and are designed to make filament management faster and more automated. You can quickly compare colors for new designs, and…
The quick push connectors for the PTFE tubes on the on the elegoo centauri carbon canvas are slightly recessed which makes them impossible to push with the finger when you want to release the tubes, this tool solves that issue. This 3MF…
This is a soldering wire spool holder. It consists of three parts: the main holder, the axle, and the nut. There are slightly recessed holes on the bottom, so you can optionally use five 8mm diameter silicone pads like…
This is a cotton swab dispenser for cotton swabs up to 76mm in length. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model…
SMD Electrolytic Capacitor Toilet Paper Dispenser with Twist Lock and Magnet I work with electronics and use toilet paper daily to clean soldering flux and thermal paste. A roll of toilet paper on the bench, however, looks quite bad and…
This is a small watering can I designed. No supports should be necessary as any modern printer is able to bridge the top part. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a…
I had a few of these humidity/temperature meters ( https://s.click.aliexpress.com/e/_c3NtSqEn or on https://amzn.to/4whnGDo ) laying around, while they are cheap and pretty useful the contrast of the screen isn't very good when viewed at…
This is a small 50x50x50 mm box I designed that prints completely flat and is then folded and glued together (this can be optional with version 2). I used B7000 glue ( https://s.click.aliexpress.com/e/_c32k0v4P or on amazon…
This is a spool holder for small spools with a 30mm hole or more. It fits directly to the original Centauri Carbon 2 spool holder mount (check the photos to make sure you have the same mount as the CC2 ships with two different types).…
I made this small but powerful air blower for fun. While I am sure there is a lot of room for improvement it works quite well. Don't pay too much attention to the print quality as this was printed on a very old printer. The impeller is…
This piece connects the two stands from the Aixun T3A ( https://s.click.aliexpress.com/e/_c3dRBPjH or https://amzn.to/3QZmkgo ) and T3B ( https://s.click.aliexpress.com/e/_c3ODuVJl or https://amzn.to/4d6iHwA ) soldering stations together…
A cute paw stud I designed for my niece. Prints very quickly. I used silver, black and white filaments but you can choose whichever colors you like. Two 8mm blank stud base pins/plugs are required, you can get these here…
This is a little hand with a pointing finger, it has a tripod thread at the bottom so you can screw it to a selfie stick (like this https://s.click.aliexpress.com/e/_c4tlmwon or on amazon https://amzn.to/42tDvZZ ) and use it to point at…
I needed a tiny funnel so I designed this. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible…
This is an enclosure for the SC3336 camera ( https://s.click.aliexpress.com/e/_c42L6Q2P or on amazon https://amzn.to/4ngrpwI ) that is used with the luckfox pico mini board (https://s.click.aliexpress.com/e/_c33LMcDd or on amazon…
This is a mini wire dispenser for small gauge wire. It is designed to use these spools: and if you buy these rubber feet https://s.click.aliexpress.com/e/_c42MtMJl (12x6mm) or on amazon https://amzn.to/3U6Pz2r (12x4mm) you can print…
This is a drawer I designed for my desk ( https://s.click.aliexpress.com/e/_c3eibuQ3 or https://amzn.to/4uA1DWS ). It features a spring-loaded stopper that prevents the drawer from falling out when fully opened, while still allowing you…
This is a 1€ coin coaster or toy. I printed it using lightning infill at 10%, which is why the silver part doesn’t look as good as it should. I’ve updated the slicer project, so it should print properly for you. Since I have a lot of gold…
Sometimes I want to cover a larger area with the UV lamp, but the small feet on the lamp don’t allow for that. With this tripod mount, I can adjust the height and orient it however I like. While I designed this for my generic UV lamp…
Remember clippy from office? I designed one to decorate my desk. In the photos you can see there is a little issue with the black part of the eyes, it was an issue in the design and is already fixed. This 3MF was created with the Elegoo…
This holder accommodates 11 additional C115 or C210 soldering iron tips and fits into the Aixun T3B ( https://s.click.aliexpress.com/e/_c3ODuVJl or https://amzn.to/4d6iHwA ) soldering station stand. Do not change the orientation, or the…
I recently bought a new set of multimeter probes ( https://s.click.aliexpress.com/e/_c3u86V8d , affiliate link). They seem to be quite good overall, but the exposed metal tips are longer than I'd like. This can increase the risk of…
This stand allows you to store the Braun Series 5 shaver vertically, which takes up much less space on the sink counter. If you live with women, you probably know that bathroom space is extremely valuable and scarce 😅 Pro tip: Stick it to…
This is a mini spool to store thin 30AWG wire. Holds about 5 meters. Just print the two parts and carefully snap them together. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using…
This mount allows you to tilt the CC2 screen up and down, as well as a few degrees from side to side. Instructions Print the two parts. I used PLA, but PETG may provide better durability. Attach the mounting bracket to the LCD backplate:…
A small cylindrical toothpick container, ideal for camping and on-the-go use. Takes up to 20 standard toothpicks (70mm in length or less). This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If…
A compact, reusable emergency toilet-paper dispenser. Simply thread the end of a toilet-paper roll through the slot, wind it and the store inside the container. Its small, portable design makes it ideal for keeping a backup supply in your…
I designed this to make a small monitor riser for a secondary desk. I just used a small (17x30cm) melamine board and two legs but you can print more legs and use a bigger board. Each leg has two 8mm holes (I made them in hexagon format so…
A small high contrast sign to warn people they are being recorded. There are two versions, one is black and silver only and the other has red letters. You can of course also edit the colors in your slicer to use any color you'd like. You…
This is an enclosure for this capacitor discharger https://s.click.aliexpress.com/e/_c2zsPlld It consists of two parts that snap together. Remove the heatshrink tubing from the board, insert the board in the bottom part and snap the top.…
These are soft TPU jaws for the Stanley 1-83-069 multi-angle bench vise: https://amzn.to/4g9iQ3L (affiliate link). Great to hold cylindircal objects. They slide over the jaws. You need to print both files as the angled slot needs to be…
This is a small fully 3D printed clipboard. If you want to stick to to the fridge you can glue a magnetic sheet to the back, for example https://s.click.aliexpress.com/e/_c3U9Tccf or on amazon https://amzn.to/3UIAFQ3 . If you want…
This is a small hexagonal shaped pen with cover that takes a "Parker" refill like these https://s.click.aliexpress.com/e/_c3VSJ18J or on amazon https://amzn.to/4nzYCDT This 3MF was created with the Elegoo Centauri Carbon 2 profile in…
This is a case that holds 4 AA batteries. The lid snaps on and there is a 3mm loop so you can use it with a lanyard or wrist strap. In the photos you can see that the loop is quite fragile but I already updated this in the file to…
This is a thin door hanger for introvert people, with 2 sides. Show other people if you are in the mood for socializing or not. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using…
A fun little fidget toy to have on your desk. Print all parts and press the iris and pupil into the eye, it should be a tight fit, if you feel it is loose you can add a drop of glue. Press the whole eye in the cube. It might be hard to…
Classic style, high contrast signage for Ladies and Gentlemen restroom identification. These are very quick to print and can be glued to the wall or door using these double sided stickers which glue extremely well and leave no residue…
This is an enclosure that snaps on the Hti-Xinati HT-201 thermal camera and allows you to use 20mm CO2 laser cutter lenses so you can get really close to tiny SMD components while still getting a sharp image. It fits in the small pouch…
This is a sturdy enclosure for a mini 16mm emergency button, such as: AliExpress: https://s.click.aliexpress.com/e/_c3ilk3eF Amazon: https://amzn.to/3UbnfvV Required Hardware 4× M4 OD 6mm threaded brass inserts , such as: AliExpress:…
This is a big handle for ¼" screwdriver bits. I recommend printing with 3 or more perimeter walls for increased strength. I designed this handle for the longer 100mm bits like these https://s.click.aliexpress.com/e/_c3rRwTAl or on amazon…
This is a bracket that takes three suction cups to mount an SMA antenna do a window. This type of suction cups usually comes with replacement screens for phones as part of a little toolkit sellers send. The holes are 6mm in diameter. You…
This is a custom-designed workbench stand for the manual SMD component picking handle included with the Slurp'nPick+ and Pick+ stations that I manufacture and sell (available at https://store.randomhacks.pt ). It features integrated trays…
This is a “This is fine” meme stamp. There is an arrow on the top part to indicate the stamp orientation. You will need stamp ink (other types of ink might work) and a piece of sponge or felt (I used a furniture felt pad). You can get…
This is a happy poop stamp I made for my nephews. You will need stamp ink (other types of ink might work) and a piece of sponge or felt (I used a furniture felt pad). You can get these at a local store or if you want to support me I get a…
I had an old laptop screen so I bought a board on aliexpress ( https://s.click.aliexpress.com/e/_c3eBZaTR also available on amazon https://amzn.to/4dOX1pe , affiliate links) to convert it into a monitor with HDMI and VGA. This is a small…
This is a holder I designed for my phone, should work with most phones. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model…
This is a diffuser for the Wurkos TS28 flashlight ( https://s.click.aliexpress.com/e/_c3YUVI0Z or https://amzn.to/4fNdj4r affiliate links) It isn't completely enclosed to allow for airflow. I don't recommend PLA for this due to the low…
This is a little grounding bracket which allows you to connect up to two ESD wrist straps to earth. Two 4mm banana jacks are like these re required: https://s.click.aliexpress.com/e/_c4B49lB3 or on amazon https://amzn.to/4v4FAYn (these…
This is a small container with a snapping lid. It snaps closed very securely, ideally to hold small pieces like screws, memory cards, electronic components, etc. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo…
This is an alien lamp that can be mounted on a wall. The spacing between the mounting holes on the back is 90mm. It takes two M4 or similar screws, countersunk or with pan head, it doesn't matter much. The holes are 9mm and the slots…
This is a dispenser for wrapping wire like this https://s.click.aliexpress.com/e/_c3xSK8VH or on amazon https://s.click.aliexpress.com/e/_c3xSK8VH (affiliate links) This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo…
This is an organizer for Best, Quick and other hot air stations with similar nozzles. It holds 6 nozzles total. The cylindrical parts are tapered to account for the diameter tolerances of different nozzles.
This is a small organizer with 7 compartments and a revolving lid. The lid snaps in each compartment. One M3 screw, 8 to 10mm long is required. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer).…
This is a small box for a hearth rate chest strap. It has ventilation holes so any moisture on the strap can evaporate. It was designed to fit this strap https://s.click.aliexpress.com/e/_c3NkEI6l or on amazon https://amzn.to/4AnXtFo…
When replacing the backlight LEDs on an LCD screen, you first have to remove the back of the TV to disconnect the panel. After that, you need to lay it flat on its back in order to remove the screen. With these stands, you can place the…
This bracket allows you to mount an air assist pump (~36mm diameter, https://s.click.aliexpress.com/e/_c4KHlqmx ) to the side vents of the K40 CO2 laser cutter. It is designed to be used with foam tape between the bracket and the motor.…
This is an enclosure for the vertyanov embedded controller programmer. It was designed for PCB version 3.3, it might be compatible with others. It snap fits together, no hardware necessary. This 3MF was created with the Elegoo Centauri…
These are all currently available results.
