Counting matching models…
This is a simple and quick to print ssd mount. I couldn't find one that just changed the fixing holes spacing on the bottom of 2.5" drives to the 3.5" drive spacing, so here is mine. The holes are all 3mm. this should allow the 2.5" drive…
Due to requests, I have added a centre piece, hopefully this should complete the set. This repair part was originally done for a friend. I've updated to include a 3 pole part, its a quickly rehashed part, but should work ok I've included…
Make sure to check out http://www.thingiverse.com/thing:2165626 for add-ons for this thing. This includes alternative fixings and spacers for the main bolt and standard receiver. Update 6 July 2020. I've added a sliding bolt release tool.…
The ZX81 was my first computer, many hours were spent playing games like 3d Monster Maze and others, and typing in games from magazines then losing it all due to ram pack wobble, but it still holds a place in my heart that I just can't…
This is a small roller I made to help with my wife's sewing. It can also be used for rolling the edges of wallpaper or anything you need to roll flat. The roller diameter is 20mm and 25mm wide. Overall length when assembled approximately…
Important! Before printing this, please check the spacing of your CNC X axis rods. I've added two test pieces to check the fit before printing. One for 68mm spacing and one for 72mm spacing. I didn't realise there were so many variations…
Update 25 January 2020 Added 6mm T-slot nut to fit bolts supplies with CNC. I couldn't find a mini clamp that I liked for my 3018 cnc, so I made my own. Most should be obvious how to use, There are versions with a small step for gripping…
Update 9th November 2019 Added Joker fixed, this now has a little fix under hair on top to prevent overhang failing. This is a model of the Joker, This was not created by me, but by my son James who has given me permission to upload this…
These are small parts trays. I made them to help when looking through a jumble of small screws or other items. The idea is the there is a largish flat area to sort through the parts to find the one you actually need. When you're finished,…
This is an io shield I made for a motherboard I bought without one. It fitted my motherboard fine, and is held in place by the io frame in the PC case once mounted. Printed from PLA choose whatever settings work for you. Category: Computer
Small key to reset Fire alarm or panic alarm etc, whatever uses FP2 key. Just be aware key only needs to turn about 5 degrees or so until resistance is felt, don't try to turn fully as this is unnecessary and may snap the key. Print as…
This is a Pod I made to explore a suspected broken drain. I made a this to attach a usb endoscope camera to the end of a cable access kit. The camera is a waterproof 7mm camera with built in illumination, I bought one with a 5m cable for…
Updated! 7x5 tray added These are two screw trays for use when dismantling laptops or mobile phones. The idea is that the screw you remove goes in the tray in a similar position to the place the screw was removed from, for example on the…
This is a staff I made for a show. The body can be drilled to fit whatever size led's you want to fit. The handle holds the battery pack and switch. The body and handle can be screwed together with 3 small screws, recessed holes are in…
This is an adapter to allow a 20v Aldi 'Activ Energy' to connect to other power tools. I have made the battery connector part which can be screwed (with the original screws from the original battery in my case) The adapters v1 and v2…
These are some elastic threading needles I came up with to allow my wife to more easily thread elastic(obviously) when dressmaking. print the needle you want, the hole can be a little smaller than the elastic, feed the elastic as in the…
I needed some replacement grips for a pair of pliers that I found, turning to rust in my garden. I cleaned them up in white vinegar, but the handles were split and beyond repair. I made these and printed them in TPU, I don't recommend PLA…
This is a remix of https://www.thingiverse.com/thing:4692711 I made this because the air nozzle was too high for my laser, I have reduced the height so the aim is where the beam focuses, 2mm below the shield. Print Settings Printer:…
Updated! including extra pictures showing where to pry using a small flat blade screwdriver, and roller position. You only need to release right hand side to release roller. This isn't necessary the best way to disassemble, but it worked…
Just a quick and simple mosfet mount, none of the ones I tried were the right size so here is mine. Category: 3D Printer Accessories
Some small spatulas made for restricted openings in small jars and containers to get out that last little bit of whatever it is that's stuck on the inside. The handles are designed for supportless printing. Category: Hobby
I've added a slightly deeper box with different partition spacing to hold larger tools. This is a storage box designed to sit on top of a Brother Scan N Cut CM300 to store tools pens and cutting blades. The one I made, is stuck with low…
This is a small sliding cupboard/door bolt. I have added slots in the main body to allow the bolt to be locked into the opened and closed positions. Assembly should be simple. just a little but not too much superglue on the pin when…
This is a belt I made to repair my floppy drive. It must be printed from flexible material like TPU, possibly others, but TPU worked for me. It just takes a couple of minutes to print. Category: Computer
This is a stylus I made for my wife. She wanted a more ergonomic stylus than the usual stick types. The parts screw together with the joiner, and there are four styles to choose from, so you can mix any combination. Print with at least…
This was one of my early designs, I've just tweaked it a bit. I've added a pen clamp instead of using rubber bands. Also added is a larger wheel in case it doesn't run freely This was made to use for tracing the edges of paper or wood etc…
Important! this is not a complete solution to removing smells/all toxic chemicals from the laser cutting or engraving process, but does remove a significant amount of pollution that would otherwise escape into a room. The only parts that…
This is a long bearing holder that can be mounted with four screws with standard spacing. It can take two bearings but only needs one set of mounting holes. This should also ensure that two bearing are perfectly aligned with each other. A…
I have added 'v2 bandsaw height knob.stl' this version can be printed with no supports. These are some parts I made to repair a used bandsaw I bought that had missing or broken parts. All parts but one were printed in PLA using 2mm walls…
This is simply a handle to fit one of the little screwdriver nut adapters you get n some PC case fixing parts. This will turn it into a nut driver for use in other projects. Just glue in place in the end, you may need to warm the nut…
Just some random bits I made. Bobbin stopper stops the cotton bobbin falling off sewing machine Frame knob I made to replace a missing knob, fits an M6 hex head bolt Mini pump filter, was a quick attempt to add a filter to a tiny 12v pond…
This is a simple io shield I made to fit a motherboard I bought that didn't include one. Category: Other
This was a request from my wife to make the print roll stay in place. Category: Household
A small self anchoring (in one direction) spacer that can be attached to Ikea Skadis board. Category: Household
This is a fix to repair the back of the two flush button pumps that had broken off the back of the faceplate, leaving the mechanism the wall behind. It's a long shot that someone might need this, but the work is already done so here it…
This is a replacement leg for a toy robot my son was given as a present. Unfortunately both of the legs were broken in the box when he opened it. The original legs as I discovered were..... I'll be polite here, were let's just say they…
I'm making this a thing, but I will probably drop more bits and pieces in to this one thing rather than make one for every little decoration I'm asked to make. So first I made some mini half cotton bobbins for a card my wife made. It may…
Since I already made the non WIFI io shield it was trivial to make the Wifi version Category: Other
I'm restoring a Corgi Chipperfields Circus Bedford tractor unit. The original rear door is missing so I've made a replacement using images from the internet as reference. Printed in Anycubic Tropical Turquoise PLA seems to be a good match…
These are all currently available results.
