Counting matching models…
Edit 06-Feb-2023 All design 3d models are uploaded if you want to do remixes. All the files are in the Freecad file. I have also made step files. Small spring loaded car with springs in PLA. Can be fully printed or few parts can be…
can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…
Just a stupid spoon that can be 3d printed... nothing fancy ;) One design has a 6mm hole the other don't. I have printed it in PLA without support if you scale you may need to add support at some point. Happy printing. ;)
A screw type stackable system for memory cards. It contains CF, CF-A, CF-B, SD, a mix CF-A+SD. I don't own CF type B memory cards so they are not yet tested. Please send a feedback if it needs to be adjusted. I'll probably make a smaller…
Standard domino set with a box (28 tiles). pieces are rather large 25*52mm because i wanted to use it with my kid. It was all printed in PLA with 3 perimeters 0.2mm layer height. In the files there is the freecad file so you can modify as…
It's a small chess / checker game design for travelling. It can be made magnetic if you have sufficient round 6x1mm magnets (96 pcs for a chess game). Be carefull on the polarity because once glued… I use cyanoacrilate to glue things…
I used the default 0.2mm layer height with 3 perimeters and 0.4mm noozle. Mine is in PLA. You need to push a bit the dow when filling it. Model is made on freecad so it is easy to modify.
3D prited hook to carry bags on the qbit+ all city. You can carry some bags behind the stroller with that and go to the supermarket with the kid for instance. I have been amazed how much PLA can carry. I used steps of 0.15mm and 5…
I made that plate to mount my Ecowitt WS2910 on top of a wooden structure. I printed it in PETG but ASA would maybe be even better. I used Spax 3.5 woodscreew to mount it.
My simple stupid sytem for Katky hydroponic. I use 40L buckets. Holes are made with a bell saw and i use standard net cup of 8cm or 3inch. Holes were made with a bell saw turning reverse direction than for wood to not grab the plastic but…
Because i have got an electrical faillure on the bike last week due to mud stacking in the horn. The bike did not recognized the horn as a genuine component so it stopped the assist. Due to that i decided to make a cover for it. I have…
This is an adaptor plate so i can test my DSLR batteries using an electronic load and LVSun charging plate as contact for the battery Electronic loads can be purchased on Aliexpress/Bangood/… I typicaly use this 35W capable load that can…
These are all currently available results.
