Counting matching models…
This is a flow rate test for different nozzles sizes using their corresponding optimal line width, this test supports 0.4, 0.6 and 0.8mm nozzles. When printing make sure the open part of the cube is faced upwards. When printing, set your…
The bambulab A1 just puts it's poop/purge on the table, here is a bucket designed just for the A1 so the poop/purge goes into it! I have included a few different sizes for the bucket. There are some copies of my model, please show some…
This is a conversion for the KP3S to Vzbot 180mm. This can also be built just as a 180mm Vzbot, just designed the rails to use the rails from the KP3S and the KP3S bed. I have included a STEP file for people to use. The original design…
First off, thanks to Rolohaun as he designed the original simplecore that the KP Core V2 was based off. IGNORE THE STEP FILES IN THE MODEL FILES SECTION, USE THE CAD TO REFERENCE WHAT PARTS TO PRINT. This CAD is a work in progress right…
Hex Emerald Planter: Takes around 3 hours to print at default size, 2 walls. Best in PLA at higher temp to increase water resistance. Use infill combination to speed up.
I modified the side of it to have a 4mm hole for a reverse bowden tube. I used PLA for this print, although if your x axis motor gets hot I would use PETG. This should work with all KP3S variants. Print settings: .25 mm layer height
"8" Crosshatch Vase Powered by Make My Vase from MakerWorld (https://makerworld.com/makerlab/makeMyVase)
These are all currently available results.
