Counting matching models…
Simple test rig to get the optimal focus height of your laser cutter. Instructions: Cut/engrave the SVG file on any 3mm material (red = cut, black = engrave, blue = fill). Make sure that everything is scaled properly (refer to the…
This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…
Related model: https://www.printables.com/model/163971-moon-rocket-fusee-lunaire If you want to use a D1 mini with an USB-C port and no button you can print this remix instead:…
CHANGELOG: 2023-10-13: Improved the “Stepper Support - Support” part to prevent nuts rotation 2023-10-14: Reduced the global footprint and fixied various issues with the stepper support 2024-01-09: Added some holes in the “Stepper Support…
Small case for a 6 channels relay board. The board can be attached to the bottom part using 3mm heat set inserts. Output wires can be zip-tied to avoid unnecessary stress on the screw terminals. The relay board I'm using is 106mm long and…
Really basic Miyoo Mini V2 charging stand made for the following magnetic USB-C cable (but I guess it should be compatible with some other brands as well) : https://www.amazon.fr/gp/product/B09CD3LHJZ/ The assembly should be a tight fit,…
Simple SN30 Pro charging stand made for the following magnetic USB-C cable (but I guess it should be compatible with some other brands as well) : https://www.amazon.fr/gp/product/B09CD3LHJZ/ The assembly should be a tight fit, but if it…
When using some third party fixture plates such as the one from SMW with the Carvera Air it is recommended to cover the tool length sensor circuit board to prevent short circuits caused by metal chips. This can be achieved using hot glue…
I needed to cut some 15mm steel tubes to build my K40 motorized bed . Since I don't have a miter saw but still wanted precise cuts using a hack saw I created a small jig that ended up working quite well. Print it at an angle to avoid…
I didn't find any BTT ADXL345 mount that I liked or that was compatible with the Taurus V4 cooling duct so I made one. Two M3 heat set inserts are required for the accelerometer screws.
A vertical mount for the power supply of K40 laser cutters. Since there may be some differences between PSUs I recommend checking the dimensions of yours before printing the model.
A simple Sliding Legolini wall mount that does not interfer with a red dot sight or the boltholder add-on.
A cheapest version of those 1€+/unit shims that are required when you want to install a Dirickx rigid fence. The original design is slightly modified in order to be able to print them without any support.
Print-in-place case for (no so common) 3 channels relay boards. You can use a M3 heat set insert to secure the board inside of the case but depending on your needs it may not be required. Case can be attached to anything using either…
The Worx WA3775 power supply is rated IP67 and can safely be installed outdoor, but: you should probably not put it directly onto the ground it may still overheat during summer if directly exposed to the sun I didn't want to drill some…
These are all currently available results.
