Counting matching models…
This is a game case holder for Nintendo Switch and Switch Lite games. I found many designs on the web, but they were big and required a lot of material and time to print. So i decided to design my "slim" version. This model holds up to 9…
A simple hook for the shower curtain. It has more strenght than the one you buy with it, so this is a nice replacement for the broken ones! Let me know if you like it, if you print one yourself, and also consider checking the other stuff…
I made this crank with a separated knob for the Z rod of the Ender 3. The inner diameter is 8mm, so it can be used also on other printers with the same rod. The knob is not one piece with the crank so it's much confortable to old the knob…
This is a simple stand for the Nintendo DS Lite model, I think it will also be good for other NDS models like the first one, the DSi, or the 3DS. In order to use it you will have to print the "base.stl" file and 2 "arm1.stl" files. They…
This is a wireless charging dock for the Huawei Watch GT2 smartwatch. I use a "ring" style strap on it, so it was stressful to take the charger and put it inside the strap in order to charge it every time. So I decided to design a…
A friend of mine needed a contraption in order to draw stuff with an equal spacing between them, so I designed him this. It goes from a minimum of 24mm to a maximum of 86mm fully opened. In the photo I printed it with 6 opening points,…
I made this marble box to contain 8 16mm marbles for a board game I printed. I made a sliding closing for an easy access to the marbles with a locking mechanism (you may have to sand it down a bit to make it close). If you are intrested…
I made this cover to protect the analog sticks on the SN30Pro 'cause I bring it with me everywhere in my bag and when I put something in I'm afraid of breaking them. The cover clips to the little holes in the controller for the original…
This is a case I made for this 7" display I bought on Amazon: https://www.amazon.it/gp/product/B0751B75GQ/ref=ppx\_yo\_dt\_b\_asin\_title\_o06\_s00?ie=UTF8&psc=1 The display is a 7" touch screen from GeeekPi. You may be able to put your…
This is a keychain with holes for a USB type A and a USB type C port. It's useful for transporting small cables (I use it with a 30cm cable) to charge your phone with a powerbank on the go. The holes have a tight fit, so the cable will…
The Oral-B toothbrush heads always come without a cap, and it is a bit unhygienic. I designed this cover for it, and it is compatible with original and aftermarket ones. The cover has a tight fit and uses just a few grams of material.…
This is a case I made for the 8Bitdo Zero controller by 8Bitdo. This is a small controller, so I want to carry it with me everywhere I go to play some games on my smartphone, but I don't trust myself to carry it in my bag with nothing to…
I made this little model for mounting the RPi3 on my printer. I love when you can see circuits and everything of a board, and printing the entire case for it would have hidden the Pi. So I bought an acrylic case on Amazon (…
Holder for 3 heads for Oral B toothbrush
This is a bumper I made for my OnePlus 5T. I love bumpers, but I wasn't able to find one to purchase, so I designed one myself! For those who don't know what a bumper is, it's like a normal phone case without the back. I love this kind of…
This is a little project I'm working on. It's an adjustable laptop stand. My idea is to make it as flat as possible when closed and adjustable in height so you can put the laptop at the angle you prefer. This is still a work in progress,…
This is a simple stand for the PSP "Fat" model. In order to use it you will have to print the "base.stl" file and 2 "arm.stl" files. They have a tight fit on the base holes, so you may need to sand them a bit if your printer suffers the…
This is an improved version of the improved version of the logitech c270 manual focus system. I love the way the original file was, but I want to put a led ring around the camera lens in order so have a better image on Octopi, so I edited…
I needed some desk holder for my Huion 420 graphic tablet (or drawing tablet, idk how it is called ahahah), so I designed one. During the modeling, I thought about making this to fit any tablet or smartphone size, so I split it in half in…
Remixed Vent ring for the Ender 3 with the support for a 8cm LED ring around the nozzle. The LED ring has to be 1mm tall in total, or it may go under the extruder and touch the print. If you have a taller LED ring try using this:…
This is a little add I made for the Hero Me Fanduct. Since I don't use a BLTouch, I put the direct drive on the printer and moved the cables on front of the printer, I used the BLTouch mount spot to put a little cable chain older in order…
If you want to use your iPod Video with a Ugreen Bluetooth Transmitter and you don't want to hold the dongle separately, this is the print you need. As simple as you can see, it's just a little pouch where you can slide your iPod in,…
This is a light switch like the one in the Frankenstein film or the one you see in big factories. I always wanted one of this to turn on the light in the room, so I designed one. It can be mounted on a BTicino plate, it has also holes so…
This is a box that can hold 4 IRF520 MOSFET drivers. I bought these boards from Aliexpress, so you can easily find them. The box has a dimension of 164x86x27 cm, 2 holes with a radius of 11.5cm and 6cm to put in a power jack and a lever…
This is a potions holder I made to hold 4 22mm bottles with coloured water inside. It's a simple design, easy to print and to put together. Let me know if you like it, if you print one yourself, and also consider checking the other stuff…
This is a low poly style diffuser for the GeoLeaf project by DIY Machines.
This is a USB wall/table mount for a flat desk usb charger. I had this charger laying around on my desk, so I decided to make an housing in order to there and don't move it around. The housing is 64cm x 28.5cm (the depth doesn't matter…
This is a cap I modeled for the Vype Epen3 by Lucky Strike. I found that the capsules were sold without any cap, and that isn't hygienic. So I modeled this that fits on the capsules. I suggest you printing it with TPU, because with its…
I made this support for the arm I remixed. I found that camera taking dust, so I decided to use it with OctoPi because it is supported with stock configuration for the camera. Print instructions Category: 3D Printer Accessories
This is another little project I'm working on. It's a slim laptop stand used to raise the height of the laptop in order to make it more confortable to use and increase the airflow under it. I designed it in order to be printed entirely in…
I made this support for a 8mm LED ring to mount on a EyeToy PS2 camera for OctoPi. With this support and its position you can see the printer working even in a totally black room. You have just to sand down a bit the model for a perdect…
These are all currently available results.
![Adjustable Laptop Stand [WIP]](https://media.printables.com/media/prints/20183/images/197219_11914158-ad2f-4f18-940c-8736ccdaeef9/laptopstand1_4_20183.jpg)
