Counting matching models…
An enclosure for the FLSUN v400 printable in ~1.5 hours for all 3 sides. Use what you've got. Don't waste time on 9+ hour prints for an “enclosure.” Zip-ties, heated inserts, glue, it doesn't matter. Take cardboard, plexi-glass, fabric,…
This is a modular, printable, Eurorack rails system. Various dimensions are provided. Accepts M3 screws which will hold and be re-usable if driven straight. Fowled threads can easily be replaced. Print both the male and female ends to…
This is a model of the FLSUN v400 aluminum extrusion. Use this as a way to define attachments for the v400. There is more space in the t-slots, this is safe dimensioning. Several CAD/CAM file formats are included for reference.
UPDATE: added wall mount. This is an encasement for the RoAT. Print according to the quality that you desire to have. Designed to use heat-set M3 inserts, the original standoffs can also be heat-set in a pitch. Case provides a tight,…
Print with 0.4mm nozzle and 0.2mm layer height. Trim bristle to length and preference. Handle may print cleaner with supports.
Support for the overhangs. Assembly: Remove backplate. Remove top plate (requires knobs and switch nut removal) Remove the standoffs on the side opposite the midi/cv jacks Slide center places into the enclosure, slotting CV jacks into the…
A little cradle for the BASTL trio: v1.5 Kastle, B Drum Kastle, & B Dude. Designed for 0.4mm nozle
Small stand for the Polyend Seq. Print a couple. Print settings don't really matter
A wall mount stand for the Dirtywave M8 tracker. Affixed via 3M strips.
UPDATE: v2 makes it feel a little bit more secure. Doesn't really matter but a tactile upgrade. Nothing too special regarding print settings.
UPDATE v2: Prints slightly faster and exposes audio jack appropriately. Nothing too special to the print, supports aren't required. Affix to the wall with 3M strips.
Print on the flattest side. Supports for the ledge.
Support on the little tabs for the legs. VERY tight fit, might need to trim with scissors. Hose splitter is a loose fit. Add strips of tape to make it pressure fit.
A wall mount stand for the Sonicware ELZ_1 synthesizer. Use 3M strips to affix.
Thing slides all over the place. This fixes it. Uses brass inserts for M3 screws.
Wall Mount for the Gecho Loopsynth. Affix with 3M strips.
A wall mount stand for the Playtime Engineering BlipBlox synthesizer. Use 3M strips to affix to the wall. Use the bumps on the back of the BlipBlox as an angle reference for the stand(s).
A wall mount stand for the Ellitone e[64] synthesizer. Use 3M pads to adhere to the wall.
I can't recall who I purchased this device from, please do reach out so I can credit you if you see this!
A wall mount for Ellitone Instruments Multisynth. Affix via 3M strips.
Alternative Nobsrine case so that it's easier to take out-and-about.
A wall mount stand for the wooden backed Hyve synth. Uses 3M strips for adhesion.
These are all currently available results.
![Ellitone e[64] Wall Mount](https://media.printables.com/media/prints/365574/images/3088169_962ce962-7a41-4250-8129-291305282daa/pxl_20230110_232512989.jpg)
