Counting matching models…
Created this sturdy filament dryer guide for Sunlu S1 so that the guide does not move or rotate. There were other filament guides available for Sunlu but they required drilling holes or using screws. This model allows the filament guide…
I created this X-axis cover to dress up my Ender 3 Neo Max. You must print the x-axis cover with the logo first and then print the color insert in your favorite color. The color insert becomes the color of the font and logo when…
** Preferred material: PLA Pro/Pro PLA+/PETG ** Use your 2" filter ring with my dew shield for your Seestar S50 telescope. I have designed a filter ring with an adapter that can fit my customized dew shield. The dew shield has an inner…
I altered the original bookstand to keep the tiles but removed the slot (no snap-ons) and kept it simple. It is still tiled and looks awesome as a simple bookstand. It can hold heavy books. You can buy these bump-ons from amazon if you…
** You do not need to disassemble your telescope. The tubes slide between two rods when you squeeze them gently. The tubes can be screwed together and they are helpful since you can customize the height of the tube to fit your build. The…
I created this to organize the sponge, liquid soap, metal mesh, or anything else in the kitchen. The tray/dish is large and the filter is strong enough to hold heavy liquid soap containers or anything else. Print Settings Printer Brand:…
The TPU feet and caps slide easily on the 12mm rods and are flexible but strong.
Remixed this to have staggered heights so that it's easy to see the different colors. Category: Art Tools
This is a remix of the model created by Wychall with some modifications. I printed this for an elderly person in need of a long shoehorn. The handle pieces were printed twice along with the shoehorn and handle end to make it a long 4 part…
This is a dust cap to protect the eyepiece when it is not in use. I had designed this for the Celestron 6se/8se telescopes but they should also work for other Celestron telescopes that have a 1.25" eyepiece.
Print the three parts and superglue them. The lower base TPU prevents the mousepad from slipping, while the wristpad feels soft to support the wrist. I printed the mid-section in 2 different colors, but it is not necessary. Enjoy!
** You do not need to disassemble your telescope. The tubes slide between two rods when you squeeze them gently. Print the tubes in vase mode (0.16 mm) or spiralize outer layers (Cura) with zero bottom layers. The tubes can be screwed…
*** Updated with ver 2.0 *** You can now print the x-axis cover and the spool holder separately. I believe this results in better-quality prints. Please print with supports. You will have to superglue the x-axis cover to the spool holder…
This focuser will work on the Leavitt standard telescope (v1 only) and the Leavitt “Lite” metric version. I liked the Hadley remixed version that supports 1.25" eyepieces only and is easy to use. Modified the focuser to support…
These are the mirror covers for the 8 inch or 203mm Leavitt telescope
Super helpful to align the primary and secondary mirrors for the 8 inch telescopes.
This is a statue of Bruce Lee in color. Uses 4 colors and is AMS-friendly.
This stand is for the Sunlu Filament Dryer and raises it by 130mm. I also created a shelf inside the stand to keep small tools. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Infill: 20%…
I needed TPU casters/pads for the Tresanti desk so that it does not slip on wood floors. I designed this to be a perfect fit. Print in TPU with 100% infill.
I was trying to think of a way to protect dust from getting into my mirrors through the large secondary mirror cover. I created this adapter that perfectly fits the secondary mirror cover. Please print it top-down and superglue it to the…
I really liked "Ender 3 camera mount for Logitech Quickcam Pro 9000" by Adeema but the printer would jam as it could not touch the x-axis sensor (due to the clip on the right towards the extruder). This will only happen if you have a…
I was looking for a dock to keep my Samsung ultrabook vertical when connected to an external monitor, keyboard, mouse, and speakers. Created this one after I was unable to find one online. You can also print (in TPU at 50% infill) and…
Needed a power source to run the cooler fan for the primary mirror. A rechargeable battery is lighter than using 4 AA batteries. Hence I created a housing for my battery along with openings to connect a USB port from the fan and a…
I created this to protect the telescope's LTA from dust and elements of nature. This model slides under the LTA (Lower Tube Assembly) and prevents dust and other particles from entering the telescope from the bottom. It only makes sense…
This adds a TPU tread to the Muscle/Foot Roller & Massager . Print in TPU and it should make it easier to roll this on hard floors.
I wanted to mount and put my camera on a stand without opening the camera mount. This will print the stand and the mount. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Infill: 25% Filament:…
Print in PETG. You should be able to resize them to your appropriate needs.
This is a cushion that you can print and glue to the inside of the Lid
Printed this to connect to the bed of my Ender 3 Max Neo. I remixed this to fit my Logitech Quickcam 9000 camera and installed LED strips to illuminate the model being printed. You will need to print at least 2 files- the camera mount and…
Stop fighting structural fatigue! If you use long runs of 1/2-inch PVC pipe to mount outdoor lighting fixtures, you know the frustration of pipe flex and sag over time. This 3D-printed Structural Spacer Clip is the precise,…
These are all currently available results.
