Counting matching models…
Printed without top/bottom layers and honeycomb to match the stand. I tend to max out the Z scale to my printer. 270mm gives a good fit to a 14" MBP. Be sure to adjust the density to match whatever look you're going for. Mine are 10%.…
This OpenSCAD model is customizable for the number of holes desired on the rack in small, medium, and large. The STL file has 5 holes, and fits diagonally on an Ender-3 S1 bed. I set this as a remix because I took the original as heavy…
This OpenSCAD model is customizable for the number of pliers desired on the rack. The STL file has 7 holes, and fits diagonally on an Ender-3 S1 bed. The OpenSCAD model requires the BOSL2 library. Prints with no supports necessary.
A simple cylinder to hold crokinole discs remixed for a Mayday board. This sleeve will hold 8 discs above the rim of the gutter.
An extension of the OpenSCAD QR tag to use a VCard format. Like the original, this prints well in multiple colors with an M600 filament change command. It is sized larger to accommodate the contents, and is probably about as small as it…
This spool hub was created from measurements of a printed original part. It fits Overture and Polymaker spools that are 55mm, but I also included the model file with user parameters so that it can be made to fit any size spool. Modify the…
Inspired by Mini Travel Yahtzee. I wanted a set that fits a full size pen. The clip is for 3x5 index card scorecards, also attached. My dice measure 15mm cube and the pen I'm using is a Zebra F-701. The f3d file has user parameters…
This is just a quickie table saw runner for a crosscut sled I'm building. I made the fusion file with parameters so that it can be customized. It will print nicely 260mm long at 45° on an Ender3 S1. The holes take #6 screws. Notes for my…
A fairly simple camera clip/mount for a Logitech C615. This clip is not “tight” on the camera, but holds it well enough for the purpose. I separated the entire base from the camera (pictured) to fit in this bracket. There is plenty of…
A quick drill attachment for winding guitar strings. A bit smaller than some other models for tight tuner clearances. Other winders I printed were crashing into nearby tuners, so I made this as small as possible. Be gentle with that…
The visor retainer on my truck cracked in half. This model is designed to replace the entire assembly and screws in place with the original screws. The visor should “click” in to the center hole and will hopefully be good and stuck in…
None of the source models worked without the little metal clips, so I just removed the shaft and put my own in. Maybe my oven is just a little older than other folks, not sure. Either way, I have 2/5 of the clips left and these are…
Inspired by previous 3D Yahtzee sets. For this go, I wanted an internal card slot, and non-hinged clasp. The previous version had some issues with longevity in the hinge and clasp. My dice measure 15mm cube and the pen I'm using is a…
Just a quickie OpenSCAD model for the JessEm Tool Setting Gauge. I recommend 2-3 walls because the default orientation leaves the shelf weak without infill (I ended up gluing it back on with 4 walls). Prints without supports.
A rather simple "lock" to keep pets out of my closet. The dumb cat learned how to open the door but doesn't know what he wants inside. Now he does it for fun every night. Highly recommend printing at 0.5mm height and modifying the f3d…
As with the original, I think simple is best here. This should fit a Craftsman T-slot saw and be long enough from the left miter slot to reach a standard kerf blade. The f3d file is included for quick modification if a different size is…
These Xmas angles are easy to print and scale. 100% are the red ones in my photo, and the green ones are 150%, which seems like a nice size. Print the halos with a brim. The angles should print just fine as-is and have a clean M600 color…
A simple caddy to store the shaving objects I use the most, mounted to a wall/mirror/etc. The parameters for each object are configurable in the Fusion model, but it'll work great with Van Der Hagen shaving products as-is. There is a…
Courtesy of printer.tools qr2stl tool. Link to settings .
This is based on Matthias Wandel's indicator mount for his table saw fence for micro adjustments to rip sizes. I printed this at 0.2mm layer heights with a “color change” at layer 11/2.2mm to put some magnets in. My magnets are about 11mm…
I replaced the logic board in my Kinesis Advantage with the KinT controller. This deletes the original cables, and leaves you with holes in the back where your USB cable gets run. Instead of trying to reuse the original grommets, I made…
I carried The DUMB Wallet for about a year, and decided that I also needed a similar concept to hold index cards for a Hipster PDA (shoutout to Merlin Mann !). The thought process began by pondering if I could just glue my DUMB wallet to…
I created this model a while back to have my own hot stopper displayed on my desk. I'm not 100% happy with the proportions yet, but it's passable. Note: The Nail and Gear has been released into public domain by Hello Internet. ( ref )
These are all currently available results.
