Counting matching models…
This portable drill press is designed for Makita DHP480 18V Cordless Drill . The drill is attached to the drill press sled from the conical torque setting ring, as shown in pictures. The torque setting ring in this particular drill model…
Part A: Countersink hole for M3x12-14mm Flat Head Screw Part B: Hole for M3 Heat-Set Insert
These cones make measuring the inner diameter of O-rings very easy and reliable for nonprofessional use. They're made for DIN3771 standard sizes. A Vernier caliper is needed to check the step diameter. I use the following sizing chart as…
I have painted this part with plastic primer and decorative gold and put it on a small wooden stand with stainless steel metal screw. The head of the screw is hammered flat and filed to fit the slot in the bottom of the printed part. A…
NOTE: X-MOTOR.STL and X-IDLER.STL are made for 22mm spacing UPDATE 15.5.2016 moved X-stepper mount point 5mm to left for 21mm version (X-MOTOR_21mm_WIDER.STL) UPDATE 14.2.2016 made parts with 21mm spacing for Geeetech i3 pro c UPDATE…
UPDATE 28.6.2016: I've been busy last few months, hope to find time for this hobby and to finalize this project page Motor mount holes are rotated 90° in ARM_ALT.STL X550 is a Work-In-Progress - here's my To-Do list: upload some video…
Designed for this abrasive: MIRKA ALOX Cotton Cloth on a Mini Roll - 38mm x 2,5m - CROP (nonpaints.com) Additional hardware: 2 x M4 heat-set inserts to the bottom of main body 2 x M4x20mm screws 2 x M4 washers (optional) Multi-Color…
For easy tightening and release of SMA / RP-SMA -connectors from R/C equipment. Coupling torque values of 0.5 - 1.1 Nm are recommended by the connector manufacturers. I recommend printing at least four of these at the time. even with ABS…
This extruder is designed for E3D v6 3mm Direct Hotend . Lightly modified extruder body and idler were made by request for 1.75mm Universal (Direct) hotend - these parts have not been tested yet. The extruder can be mounted into Prusa i3…
The filament I used ( Recreus Filaflex SEBS ) is like hard rubber and as the original cap was really hard to remove, I increased the inner dimension and decreased thickness. Also there's a small breather hole to prevent vacuum effect.…
These are all currently available results.
