Counting matching models…
Mora Coin from Genshin Impact Action RPG game. Split the model in half and print) Print Settings Supports: No Resolution: 0.1 Infill: 100% Filament: eSUN eSilk PLA Gold Notes: Print with Ironing Enabled
With this case the camera can be easily mounted on the aluminium extrusion profile. You will need 4 m2.5 12mm screws for the case. You can use m3 8mm screws for mounting the camera to the bracket or use m3 12-15mm threaded studs and…
Compact and sturdy case for Meshtastic / MeshCore node build. The case has a snap in back cover and a spacer to keep the battery separated from the electronics. The case allows the use of RG178 pigtail for better radio reception. The case…
This is an X-axis carriage project for Ender 5 Plus. The carriage allows you to install BMG feeder and V6 or CHC Pro hotend or other v6-compatible hotends. It is possible to adjust the vertical position of the extruder. My carriage…
Just another arm feet for the TBS Source One v3 frame. Approved by the international curling association. Height is 7mm. You'll need 1mm longer bolts. Print Settings Resolution: 0.2 Infill: 20, Gyroid Filament: Bestfilament PETG Light…
Lightweight parts cooling system with two powerful 5015 radial fans and E3D radiator mount. The ducts provides excellent layer cooling for high flow printing and ability to print steep overhangs and long bridges. CHC/CHC Pro and V6…
4x6cm protoboard M2.5 screws ESP32-WROOM-32 Type-C breakout board with pull down resistors for 5V SN74AHCT125N logic voltage converter buffer Wiring: https://kno.wled.ge/basics/getting-started/
Jonsbo N1 Vented faceplate for better airflow. M3 screws, nuts and spacers are needed for attaching the faceplate to case. Font i/o pannel modified to fit 3x 3mm leds for server work indication. Can be mounted with stock screws.
Adapter designed for 48x40x11 radiator. No additional hardware needed. Print Settings: Supports: No Resolution: 0.2 Infill: 100% Filament: PETG for "AOC_S3008L_cooling.stl" ABS for "AOC_S3008L_clips.stl" Assembly: Clips need to be glued…
With this bracket you can attach a 40mm fan to Fujitsu D2607 HBA card for better cooling in atx computer case. Parts needed: 2x M3 nylon 12mm standoff. 6x M3 nylon nut. 6x M3 nylon 14mm screw.
Face saver for your lovely Source One. Qwad's face will be clean and tidy. You'll need 1mm longer bolts. Print Settings Resolution: 0.2 Infill: 20, Gyroid Filament: Bestfilament PETG Light Gray Notes: Holes are printed with 0.2mm bridge…
Four adapters that allow you to use regular round earpads with Koss Pro4S. 100mm, 105mm, 110mm, and 105x90mm ergonomic (follows the shape of the case with 16mm offset) I personally use 100mm with aftermarket DT770/990 leather earpads. All…
Part designed for Trianglelab DDB v2.1 bmg clone feeder, prevents very soft filaments from jamming between the gears. PTFE tube goes directly from the gears to the heatbreak. Files include the following: Filament Guide (ID 4.3mm) Filament…
I'm a big fan of Mr. Steele and found his foam wedge gopro mounting style to be the best. But I was always afraid that the camera was held down with the strap by the very edge. So, I designed this facehugger style mount that the contact…
Designed my own headband to use H1 as headlight. Suitable for band width 25mm, I use one from Petzl Aria. BOM: 4x Heat insert m2x3x3.2 4x Flat head screw m2x6 Changelog:
These are all currently available results.
