Counting matching models…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
A simple stand for the Edifier 1280T. I've uploaded both f3d and step files for changing it to your specs.
Print approx. €9.07–€11.09 excl. taxPreliminary estimate for one variant
My first design. It's a simple stand for an acrylic photo frame that can be bought on aliexpress. It is designed for the 254x203mm that is 19.4mm thick. It's best printed on its side. Link to product.…
Print approx. €2.15–€2.62 excl. taxPreliminary estimate for one variant
A simple dock to charge your Arizer Solo II in. The Solo II can be slid into the dock from the front onto the charging plug.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Remixed the original large Pinecil case to be printed in multiple parts/materials. Reason: because it looks good.;) Tolerance between the outer and inner parts is 0.1 so it should fit nice. Glue the inner to the outer parts. Be sure to…
Basically the same idea as the Gridbox by bilboDD but with holes for 6x2mm magnets. I also added some size variants to suit everyone's needs. The box is made for gridfinity boxes that are full height. Make them at half height and you can…
A stand for your Vinyl record covers. Can be printed with any material you are comfortable with. This model was printed in on its side with Prusament Galaxy Black filament and 0 infill. Inspired by a commercial model but built from the…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
Title says it all. I've optimized the size for the bed of the Prusa Mk3. As it was too big at first, I made it modular for printing at the maximum size. I've also included a smaller one that can be printed in one go. The legs and body are…
Gridfinity AA 2x2 battery holder for the gridfinity system designed by Zack Freedman .
Reshaped the LCD-knob of the MK3+ to make the tactile feel more like that of the MK3S. So I made it a bit smaller, fattened the arms a bit and made an indentation. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter…
A multi part fridge magnet in the shape of Thor's Hammer. Many Mjolnir only come in one piece or are uploaded as just an stl. I wanted to enable people to print it in multiple materials and use their own magnet so I used the model of…
A generic coaster holder that I designed for my CNCed Celtic style coasters. For finetuning the size you can use the included Fusion360 or STEP file. I've also included a few stl's of different sized holders. For height you have to scale…
An assortment of geometric animal designs that I have used for CNC projects. Included are STL for 3d printing and SVG files for laser cutting and CNC routing. None are my own design and I have scrounged around to get them from all sorts…
Dunlop or Woods valves are usually used for inner tubes for bicycles. According Wikipedia these valves are not common in the US and are generally found on bicycles in Europe and Asia. The thread isn't exactly 1:1 to the valve thread but…
A monitor stand that made to suit my own needs. I designed it from the ground up but used a few designs as inspiration. It uses shelves of 200x18mm and is 150mm high.
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
A wrist rest made for my Ducky 100% keyboard. STEP files are included for tweaking the size to your specifications. Made on a CNC router with reclaimed wood. Finished it by sanding it and applying tung oil.
A universal adapter for the X20V Parkide tool battery with an addon for connecting a Pinecil or T100 style soldering iron. The adapter can be used to attach your own addon. I included a step file for remixing the designs to your own…
A ruggedized box for the ES15 screwdriver meant for inserts made by 51M0 . This remix was requested for by another user. The box's interior dimensions are the same as the insert but with a +0.2mm tolerance. Latches and hinges are made to…
A garbage bin clip to keep the lid ajar. This should prevent build up of moisture and prevent maggots from spreading. This version is made to fit Omrin garbage bins. This is not an original idea. Check the aptly named Kliko-Cracker for…
A garbage bag dispenser that can be changed to your needs. Main paramaters are Height, Roll Diameter and Number of Rolls. In Fusion 360 open the ‘Change Parameters’ option to change your values. I've included a few generic versions that…
Another knurled knob for your Prusa. It comes with a dimple and in two parts for even better looking knob action. Available as knurled or helical. Included the STEP file for customization. Printed in Prusament PETG Prusa Orange and…
This remix is meant to make the excellent design of PattysLab a bit less intrusive visually . It is meant to be fixed on the wall with double sided tape. Just copy and flip all the parts in your slicer to get a left and a right half.
Though I love the shape of Swisi's original Iphone stand I didn't want to go through the hassle of assembling it. So I made a similar looking one piece version of it. Holes for optional 6mm neodymium magnets are included but with a dialed…
It turns out the filter of the Roborock S7 is not the same as that of the S6. ;) Thanks to the clean fusion 360 file of fns720 it was easy to remix this adapter. For fun I added some Roborock themed embossing. I also included a 'clean'…
I used the Nespresso Capsule Holder by pcornelissen as a base for this Nespresso capsule holder. It is specifically tailored to the Krups Essenza Mini. I used 10% infill for the base and 0 for the cup holder part. Supports are only needed…
A sword stand based on one that Albion made. I might try and make one out of wood in the future. Print Settings Printer Brand: MK3 Printer: Prusa i3 Supports: No Resolution: 0.2 Infill: 10% Filament: Prusa Filament PLA Grey
A wall mount for the charger of an Elops 120E eBike. I have added the STP file so it can be modded to fit chargers of all brands, like Bosch or VanMoof. I would recommend using PETG as PLA tends to sag with constant stress and heat.…
As I couldn't find a matching SSD enclosure to accompany my PS5, I naturally decided to design one myself. The case specifically fits an SSD connected to a Sabrent USB 3.1 to SATA connector. I included an stp file for people wanting to…
Made a magnetic bitholder similar to the one that comes with the DeWalt electric drill. Just widened it up a bit as I seem to gather way more drills and bits than the original can hold. It should fit two 20x10x2mm neodymium magnets.…
The original was a good fit. The comb was asymmetrical though, causing one of the 'teeth' to be fragile. I split the original, mirrored the good side and merged both to create a symmetrical and stronger comb. A brim was used for extra…
A wide pool vacuum to cut time cleaning. It is made for a standard 32mm hose and a 24mm pole that often comes with other pool cleaning equipment. Printed with Transparent Prusament PETG Update: After using the nozzle for a bit the pole…
A solution to mount unstable panniers to the wall and free up some room. I personally used an extra piece of wood to prevent having to drill 8 holes in the wall but it is not mandatory. I have not tested the mounts under load as I only…
A tray for the Omnifixo M4.4 fieldbox to allow it to be removed with content and use Omnifixo vertically. Two versions are included: one with the layout of the original divider and one with larger compartments. Update: Added two versions…
Use these stands to put your VanMoof upside down without damaging the handlebars. I've included multiple versions: Simple: Print the whole thing in TPU. Overengineered but better looking: print the base in any material you want. The…
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the…
Although I made the STL myself I want to give GrowFlavor credits for pointing me in the right direction on finding the DEM files. I included the file needed to use with Vectric Aspire: an awesome program for creating CNC projects. Plywood…
The original helmet hanger was changed to feature a clothing hook.
A tray with removable compartments. It adds a bit of flair in the living room but can also be used for tinkering. I printed the inserts and made the rest out of plywood on a CNC. There however is no reason it can't be printed entirely.…
A rack to house 16 filament spools. Files included for 6mm and 10 mm board thickness. A tolerance of 0.1 mm is kept for variation in router and board thickness. Versions with dogbone filets are also included. The rack in the photos is cut…
In the sea of helping hands I want to present my own design. It uses cheap Line-Loc/Snap-Loc clones and alligator clips. As I am fortunate to be able to source free material from my job I decided to make a weighted helping hand base. This…
Towel Holder This remix is meant to make the excellent design of PattysLab compatible with the Ikea Skadis pegboard. I uploaded multiple versions including one with the option of hanging pegs from it. Gotta maximize that space! As paper…
A simple stand to store the RoboRock S7 mop mount on the charging dock. I advice using a bit of double sided tape to stuck the stand to the charger prevent pulling the holder from the charger.
After trying out the gear published on thingiverse in the actual odometer, I've discovered that the little indentation that hooks to the number pin was not deep enough. The original has a deeper indentation compared to this model. So I…
Made this fruit bowl out of some underlayment with a CNC router at work. It's not exactly a 3d print but I'll upload the STL and STP anyway for you to do with it whatever you want.
Simple feet to increase the space underneath a couch. Perfect for giving robot vacuums the space to drive underneath. Step file included for changing it to your specifications. Don't skip on the infill. This thing has to carry a lot of…
CNC Kitchen inspired me with this video to use recycled foam as dampening material for my MK3. Instead of using big slabs I decided to incorporate them in feet connected to the printer. I made the feet in two parts for easier printing. I…
A case for a Wemos nixieclock bought from https://www.nixieclock.biz/Store.html If tolerances are too tight; try and scale the main body. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.3 Infill:…
Magnetic remote holder for Edifier 1280T for easy storage on anything that a magnet can stick to. There already was another remote holder available on this site but I had other magnets laying around. Also, it's fun to reinvent the wheel.…
New scales and a spacer for the Ganzo G724M. Just flip the design in your slicer to get both scales. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: Variable Infill: 15% Filament: Prusament PLA Galaxy Black
Warning: Before printing make sure that this mount will fit under the platter. Your turntable will probably have to be partially disassembled to route the wires in a correct manner. The mount itself is held in place with double sided…
A remix of an already wonderful mount By ClassicGOD. This time made specifically for mounting on the Ikea Poang chair. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Filament:…
These are all currently available results.
