Counting matching models…
I have printed the parts using PETG filament as this was the only filament in blank white color I had in stock. Unfortunately the filament has a very poor quality. The filament appears to have very poor diameter accuracy. For this reason…
Power supply housing should also fit DPS5005 DPS5015 DPS5020 SK120 SK60. Printed with Prusament PETG Orange. Organic supports for front panel outlet only. The feet needed to be printed 4 times and are glued to the bottom part. Additional…
This is a Model for a specialzed housing for my project on github. https://github.com/OFreddy/wifi-tft-rf24L01 It is printed using Prusament PETG, needs no support with 0.2 mm layer height.
I found the original case to be impractical and difficult to open. The model includes a snap in base plate for easily remove the sensor for battery replacement. Another advantage is that the battery is additionally fixed, which improves…
Replacement for the original waste container of Miele coffee machines. Original article number 09458490. I always had the problem that the coffee waste didn't fall all the way to the bottom because of the bar in the original container.…
This is a replacement part for the Homematic IP HmIP-DLD door lock drive. The rotary knob on my drive broke off, and I had to find a replacement. Printed with 3 Perimeters, 20 % Infill, 0.2 mm Layer height and ramdom seem.
This is a case for the great USBtingo CAN-FD Bus interface . The interface PCB can be purchased from this page: https://www.fischl.de/usbtingo/ I like to use it professionally and privately and would like to protect it from mechanical…
This is a SSD Mount for a raspberry pi installation suitable for 2.5" SSDs and Sabrent USB 3 adapter. https://amzn.eu/d/dF2hcoD It is intended to be used with the perfect design of this RaspiCase with Vesa mount:…
Models to mount and store electronic components for my Flightradar24 Feeder. In my experience, the greatest range is achieved when the antenna cable to the SDR is as short as possible. Therefore, in my solution, the RTL BLOG is mounted…
These are screw covers to hide the mounting screws of the Hose Box. Printed with Prusament PETG Anthracite on a MK3S+ with: 0.2 mm Layer height, Random seem, no supports, no brim and 3 Perimeters. 20% Infill. Each model needs to be…
This is a spare part replacement for the direction adjusting lever of my Bosch GSR 18-2. Original Part-No. 2 609 101 009. The part is mounted in many other Bosch tools. Printed with Prusament PETG. Due to the sloping surfaces, I printed…
These are all currently available results.
