Counting matching models…
After using the very nice TS100 box from @pjotrstrog I decided to make a few small improvements according to my own needs. The inserts will fit into the original box as I didn't want to reprint the main box. Here are the changes I've…
I needed a way to organise all of my metric bolts, nuts & brass inserts. So I made this case based off @whity's rugged box design & combined Zack Freedman's Gridfinity. This box has pre-made labels that can be printed if you have an MMU,…
After a bit of hunting I decided to make my own build plate caddy. This one provides support at the top & the bottom so that if bumped or knocked over the edges of the build plates don't risk getting bent. You will need 8 M3x20 screws to…
After spending a fair while trying to get a JoyCon strap replacement I liked the closest I found was Po1nt's. I took his design & modified it a little: I'm using radius's instead of a flat bevel I moved the latch retainer so that it works…
I made this so I could mount a HomePod mini to the wall in my daughters bathroom. It can be mounted using either 2x 3M adhesive strips or screws. I've personally used the 3M strips. When printing be sure to enable supports on the back…
I wanted a compact box to keep my Fluke 107 together with the test leads in an organised way. I’ve remixed @Whitty’s rugged box a bit to accomodate the fluke meter whilst having a roughly similar footprint to the other compact tool cases…
I made this box as I wanted to keep all of the tools & parts I commonly use for printing in one place and easy to access. Massive thanks to @Whity for his rugged box file. I've included a Step file so people can make their own version, I…
I wanted to bet able to take my Corne from one location to the next without it getting damaged in the process. This is only designed for use with the V2 Corne using the Nice!Nano controller with a Nice!View display (as pictured) and the…
I built this so that my Sofle would be a little less naked than you get with the usual acrylic plates. This model is only for the Choc 2.1 variant with nice nano controllers and nice view displays. In addition to the keyboard itself…
I purchased an electric screw driver from Hoto that came in an aluminium cylinder. The driver itself is fantastic, but the cylinder took up a lot of space and didn't stay closed. The bit selection was also rather poor. I decided to make a…
I got sick of dust being around my lenses all the time that I couldn’t clean up. So I made this. it friction fits around the lenses so no adhesives are needed. In the photo I am using a smartish case.
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
I made this to my wife could use her ESR charging puck more like other stand style chargers. it needs to be printed face down for best results. I used 0.16mm layers in the photos. The back is open to help the puck vent heat.
I wanted a box to store the DT71 tweezers that had the same size & shape as my TS101's box. I made this to accept the foam insert from the original case as I quite liked that part. You will need 6 M3x20 screws to make this. STEP file…
I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…
I found it to be inconvenient that I had to grab things like Flux and tweezers out of a big box of “mess” whenever I needed them. So I’ve made this TS101 accessories box to keep the commonly used bits and pieces together. Most of the…
The Hoto rotary tool came in a very nice case, but the case did not fit all of the bits I wanted it to. So I made this case based off @whity's rugged box design & combined Zack Freedman's Gridfinity. The lid of the box is designed to seal…
I have both the iFixit Manta & LTT Store driver, I wanted to keep them together in a way that stacked well with my tools. I made this box to let me keep the original Manta case intact. You will need 6 M3x30 screws. As always, I've…
I wanted a box to store the MPD-P906/MDP-M01 lab supply that had the same size & shape as my TS101's box. I couldn't quite get it the exact same shape, but the footprint is the same as the TS101 box. I made this to have a thin adhesive…
I wanted a fan to suck away the bad fumes when I was soldering, I also wanted USB C & for it to go into a case the same size as my TS101. This is the end result. It works well at 15cm or so from the soldering work. Hardware needed: 11…
These are all currently available results.
