Counting matching models…
A simple playing card holder I made for my daughter. Fusion360 file and short how to change the name in the pictures 💪🏻 Update Since the top layer is not flat it always printed with small "stairs" To get rid of this I rotated the X axis…
Update 2024-06-23 Added 3 new corners Update 2024-01-02 Added T-junctions and an end piece I designed the cable channel to cover the 4 Atmos cables running from my ceiling to the AV receiver. The space for the cables inside is 20 x 10,5…
A friend showed me a picture of this very special cookie cutter he saw online, so I redrew it in Illustrator and extruded the whole thing in Fusion 360. I hope it will bring you as much holiday joy as it does to my friend o.O
Cellphone holder with 3 positions, I made it for looking up recipes while cooking. I'm not really good at 3D-modelling, so I designed it in Illustrator and used Fusion 360 to just extrude the surfaces 🤷♂ I also uploaded the .svg if you…
Pretty much a direct copy of this product on amazon . I decided to try out the printing technique as explained in this post: https://blog.prusaprinters.org/model-with-prusaslicer-modifier-meshes-tutorial_30438/ I printed it with 0 top and…
Quick remix of MandicReally's super awesome Kyle Cup. The original cups handle has 4 ridges which makes grooves for 5 fingers. Normally only 4 fingers are in the handle, so I feel there should only be 3 ridges / 4 grooves. I only made the…
A simple holder for one necklace I made for our bathroom Edit: Added version with 4 knobs on the back, doesn't look as good, but is more useful for long necklaces... Print instructions I printed it with 15% infill lying on the side,…
After printing Lobocnc's awesome Desktop Stomp Rocket I found that the plunger likes to slide down on its own inside the launcher (damn you, gravity!) so I conjured up a quick spring. I only made one full circle which should be printed on…
Simple design prints lying on the side without supports -> Please print 2 for the open version In the slicer you can easily change the z height of the model to your liking, but don't change x and y 15% infill should be enough. Attention:…
Printed with 2 color changes, the daughters don't mind the different colors on the outside of the frame. Printed with DasFilament's Royal Blue and Infinity Blue and Extrudr's Chocolate Brown for the top. Water texture borrowed from…
A colleague of mine is taking her daughter to see the Barbie Movie, so I thought it would be nice if they had an accessory to wear to the cinema. I actually was sure that a model like this has to exist, but I only saw D3D Creatives'…
Edit on Dec 2024 (V2) I changed the original design of the small moving part in front a bit, to make it more sturdy (green mark on 2nd picture) and to let the Vorwerk parts slide in more easily (red part on 2nd picture) I still keep…
After cleaning our leather table/place/dinner mats I don't like to dry them right away, so I wanted some rack to let them drip dry. The idea was to make it easily expendable, just print another pillar and to connector parts and you can…
A friend wanted a Baby Yoda coin bank for her brother's birthday and asked me if I could 3D print something for her. After checking all the models I told her that I don't think this would work since I don't have an MMU, no perfectly…
A friend of mine lost one of his 2 Ikea Nymane wall fixtures while moving. Since the fixture plate is not sold separately I recreated the part 1:1 in Fusion360 (with a little bit sturdier base plate) without the spring-loaded movement.…
After I found out that dumbbells are indeed quite heavy and annoying to log around while cleaning I decided I need a movable (and affordable) stand for my 3 pairs of weights, 2 of which are round. So I got this furniture dolly from Aldi…
Since the HomeVacs nozzle is a bit small I created a larger adapter to more easily clean small dirt of tables, floors, carpets or sofas. The 3mf files contains support enforcers but after printing they were not very easily removable and I…
After removing Lopotok99's Stabilo holder from the prinbed I thought to myself: “Wow, this looks awesome! … Would be great if it could spin, though…” and I ordered a 20 pack 8 x 22 x 7 mm 608 ZZ ball bearings for 8,50 Euros on amazon. The…
I wanted to put my Apple TV directly on top of my AV receiver. But since the receiver vents the hot air from the top and the Apple TVs air vent is on the bottom I didn't want to place them directly on top of each other. This is my first…
The original green stand packaged with the Beurer TL30 is a little bit flimsy, this is a sturdier version for your desk or bedside table. It allows usage with the cord attached. Maybe the spacing is a bit too loose for you (see picture…
Just a small rack to store your Niimbot labels. I designed it for new rolls to have a tight fit, but there are no separators since I have 2 different sizes of labels. This means that used labels will move around freely, I just squeeze…
Simple design prints lying on the side without supports -> Please print 2 for the open version In the slicer you can easily change the z height of the model to your liking, but don't change x and y 15% infill should be enough
A heart with text or blank
Over on thingiverse I found this awesome set of adapters for my Vorwerk hand-vacuum. Especially the kids like to “clean” the floor with it, but PLA on hard floor makes an unpleasant screechy sound. The original designer printed the bottom…
I call it: The Nut Master 3000 🤯 I got the idea for this design from the bird feeder cover image from the PET-Bottle Upcycling contest. Since my wife eats a lot of nuts and always needs to have 2 bowls on the table I thought this could be…
A family friend restores old motorcycles, so I decided to have the easter bunny bring him a sign from an old German bicycle and motorbike company. I used the vector from wikipedia here:…
The rubber feet of my piano stool were disintegrating, so I designed a quick new one. The tube of my chair has a diameter of 25,5 mm. Printing In my case there was a lot of stringing between the feet. If you print more than one I would…
After seeing that the new iPhone Pro color was called “Desert Titanium” I knew I wanted to have a nod to the great movie / book series Dune. And what better way to show of your fandom without being too obvious than having the silhouette…
In Germany we have a new special edition of the IDW Teenage Mutant Ninja Turtles coming out ( you should check it out if you're from a German speaking country) so I needed some bookmarks. First of all, credit where it is due, I found this…
German Ikea has the 3-piece cactus set , I designed a 3-pronged holder for them. My girls wanted it to be “pink and cloud”, so that is what has been printed ^^ Prints without supports, Fusion360 file is also added
As a quick invitation for a halloween party I cleaned up 2 vectors, imported them in Fusion360 and voila, an invitation card that can also be used as wall or window decoration. For small sizes please check that you have “detect thin…
A small mod of Ben G's original model to be sticked to a flat cornered surface by double sided tape or Tesa Power Strips. I added a small cavity with 3 different depths (.stl with no addition is flat for double-sided tape, 0,6 mm for…
I don't know if this counts as a remix since I designed it from scratch in Fusion360, but I really want to give a big shoutout to hxr's crayon holder which heavily inspired this case here: Mine uses the same principle, pencil goes in, lid…
A small pendant for the 6K United Concert in heart shape with a 2,2 mm hole for a cord. Printed without AMS with material change
A friend of mine wanted to make a soccer themed cake and needed a way to cut fondant in a hexagonal shape. Easy to do if you have a 3D printer, so I created 2 different cutter sizes, 35 mm and 40 mm inner diameter. The 40 mm was used for…
These are all currently available results.
