Counting matching models…
I made this model last-minute for the Halloween by mashing together 2 other models. You might need to scale this +-10% to fit your head size. Do print the headband before you print the ears to make sure that it fits comfortably. Headband:…
I originally wanted to put gears on these to make them looks cooler, but the clip is too small for me to add them. So here's just the base. Feels free to remix this! The thin version have a thinner inner piece. It is more flexible but…
Printed at 0.3 mm layer height but you may use a smaller number if you want more clarity at the top where it is very slightly curved. Infill that I used is 10% Gyroid but I think even 5% should works fine. This model is designed to be…
I only cut the 3 files that were too long for my printer. The cut is done in PrusaSlicer, positioned in where they make the most sense. Please check out the original creator for their amazing work, and the rest of the inserts!…
Notes: The measurement for the corner flats are taken from this project, but remodeled it myself. https://www.printables.com/model/116797-corner-brackets All the measurements in the build instruction is just for reference purposes. Feel…
Descriptions: This is a board game insert for the game Legends of the Three Kingdoms, specifically for the 10 Years Anniversary Classic Edition. ( 三国杀国战十年经典 ) This was made because the card sleeve we got was too big for the original…
This model is designed to be printed without supports. This 14mm Dice Stacker stores up to 40 dice and dispenses 5 dice at a time for easy counting. If you do make this model, please show me your makes too! Note: This model is designed…
Filament Type: TPU Filament Temp: 220 Bed Temp: 40 Print Height: 0.28mm First/Last layer Infill Pattern: Concentric I set all speed to 20 mm/s, you can probably go higher. You must use Vase Mode with this model or the middle will be solid…
Printed in .28 layer height with PLA This insert is designed to have the cards be sleeved. Also includes a cutout for the round counter.
Simple box extender for the Shady Lady boardgame. Printed in 0.24, but it is a simple model that should be able to get printed at even higher layer height. If you want to keep the original divider, you will need to trim ~3mm off the long…
These are all currently available results.
