Counting matching models…
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
Another student request, for pens this time…
Use to strain aquafaba or brine from canned food. Press to get rid of the excess brine in tuna cans.
For an alternative design, or a different storage capacity, please check this design: https://www.printables.com/model/1326070-15-ml-falcon-tube-holder-4x-6x-8x-10x For 50 mL tubes, please check this model:…
Holder for 1, 3, 4, 5 or 6 falcon tubes (50 mL). For 15 mL tubes, please check this model: https://www.printables.com/model/501923-15-ml-falcon-tube-holder-1x-3x-6x or this one…
Comes in handy when freezing multiple samples in liquid nitrogen. For an alternative design, please check this model: https://www.printables.com/model/1326290-eppendorf-cuvette-vial-holder-10x-25x
One of my very first prints, post-processing may be required for shaft parts to fit (light sanding). I updated the files so that sanding won't be necessary. This hand cranked centrifuge takes 5 mL tubes and can spin liquid down to avoid…
Requested by a grad student inspired by the Romero Lab at UCSD.
Main proportions are taken from a Tecnifibre Carboflex Cannonball 125. Key ring hole is 2.4 mm in diameter. If you wish to print with two colours using a single nozzle, you can find here the models for the racquet split into “bottom +…
Holder for test tubes (10x, 25x or 50x). Takes glass tubes 1.3 cm in diameter.
Microscopy slide holders in both horizontal and vertical positions. Slide size: 75 x 25 mm. Used for contamination free sample preparation. Also reduces the consumption of kimwipes conventionally placed between the working station and the…
Design allows for easy refills. The hole in the back was added for an easier dispensing experience. If you work with 35 mm petri dishes, it's likely that they have lips that help them stack on top of each other. These lips may sometimes…
Prevents glass syringes from rolling on the bench when used. Can be used as a drying rack when washing the syringes and their plungers.
Openings in the base are for easy cleaning and drying. For the other Philips trimmer stand, please check this link: https://www.printables.com/model/1314264-philips-qp2630-oneblade-stand-organizer
Ideal for carrying plates from the bench to the plate reader or microscope. Holds 5 plates, with or without their lids. Front cover provides a lightproof seal and prevents the plates from sliding out. The handle is to be glued to the top…
If you are looking for a teardrop design, it can be found here: https://www.printables.com/model/912783-squash-racket-teardrop-or-open-throat
All parts print easily without supports, except the main rod. Once you remove the supports, make sure that the cylindrical part is smooth. To assemble this wind vane, simply stack the parts on top of each other. Double check the…
Cuvette drying rack. Holds 5 or 10 cuvettes and their caps. Fits all standard UV-Visible and spectrophotometry cuvettes (1.2 x 1.2 mm). Smaller version (5x) does not have a cap tray.
For an alternative design, or a different storage capacity, please check this link: https://www.printables.com/model/501923-15-ml-falcon-tube-holder-1x-3x-6x or this one…
For 2 dram vials, please check this design: https://www.printables.com/model/360935-holder-for-2-drams-vials-5-ml-tubes-and-15-ml-falc For 1 dram vials, please check this design:…
Openings in the base are for easy cleaning and drying. On this page, you have access to two design files. One with straight outlines and the other with curved ones. For the second Philips trimmer stand, please check this link:…
For the racquet, you can choose between a teardrop or classic style racquet: Teardrop: https://www.printables.com/model/912783-squash-racket-teardrop-or-open-throat Classic: https://www.printables.com/model/843204-squash-racquet . Reduce…
Main box and stoppers need support while printing.
Ventilation fan assembly with reducer. Ventilation adapter. Reducer: 7 inch to 4 inch. The reducer is available in two designs. One has a hole for the electrical cable of the fan. The other does not. Fan details: AC Infinity AXIAL 1238,…
For 4 dram vials, please check this design: https://www.printables.com/model/562787-4-dram-vial-holder-2x-4x-6x-10x For 2 dram vials, please check this design:…
Holder takes 4x 10 mL round bottom flasks.
Revisiting a previous design with new adjustments. Mainly for people who requested taller holders and full perimeters. These holders are ideal for sample storage on workbenches, in refrigerators and freezers. The one size fit all design…
You can get a 25x version here: https://www.printables.com/model/882970-holder-for-2-dram-vials-19-mm-25x For 1 dram vials, please check this design:…
Enclosure for 3d printer. Modular and can adapt any printer size. Protects from air currents and drafts. Helps in maintaining a constant temperature within the enclosure. Avoids unwanted warping of printed objects. Plastic sheets used:…
Print the base and the top separately, unless you have a big print bed… The parts fit in a stable manner and can be glued together. Original beer bottle design: https://www.thingiverse.com/thing:1647062.
Holds ten 6 mL vials. Fits in cryo-boxes.
This model was used in the following publication: https://doi.org/10.1021/acsearthspacechem.2c00328
Original size is 5 inches, use uniform scaling to change dimensions and make both the pot and the saucer smaller or bigger. Does not need support structures when printing. Pot in pictures was scaled down by 50% to 2.5 inches. For…
Two versions are available. Pick the one you prefer or try both! The hollowed out version has a snugger fit and is slightly thinner than the full version. Print with flexible material, ideally TPU. PETG and PLA should work too. Side note,…
Low poly hexagon pot with drainage and saucer. Print separately or together. 3 pot sizes.
Used for passive air intake in a microscopy dark room, seed germination stations and incubators. The design consists of two parts for easier printing and minimal post processing. The two parts are to be glued together as indicated in the…
Design allows for easy refills. The hole in the back was added for an easier dispensing experience. These models can hold 64 dishes and have different styled bases: small footprint, standard tray or an alternating tray. Supports are…
Forked stake shape. Helped me place sticky strips in small planters. Comes in handy when placing plant labels as well.
Wall mount for tubes and cables (2.2 cm ID). To be fixed in position by double sided tape or the glue.
Ideally, print with a layer height of 0.1 mm. Keep in mind that FDM, or 3d printing, creates porous objects where bacteria can grow. Hand wash and let dry before storing.
Hold in place with screws or double sided tape. Fits wipes dispensers up to 11.3 mm in diameter (4.45 inches). Can dispense from the bottom if you place your wipes container upside down.
For an alternative design, or a different storage capacity, please check these links: https://www.printables.com/model/1326070-15-ml-falcon-tube-holder-4x-6x-8x-10x or…
For 2.5 inch holes. Protects tubes and electrical wires from abrasive and sharp angles of a hole.
Comes in handy while cleaning glassware that contains a medium to small magnetic stirrer bar. Similarly, helps in dispensing liquids from vials, cuvettes, flasks, and glassware while preventing the stirrer from coming out. Also used to…
For the racquet, reduce size to 95%, pressure fit after printing. Two styles available. Classic: https://www.printables.com/model/843204-squash-racquet . Teardrop style:…
The base plate and the holders take standard small magnets (1.2 cm diameter; 2 mm thick) The base plate is to be glued to a surface on to which the different holders can be placed. The use of magnets allows for more than one type of…
Print with TPU or other flexible material. Two designs are available, one is solid while the other is vented. Pictures show the printed piece on a G-Shock DW5600BB-1 men's watch.
Takes 25 mL flasks. Adjust overall proportions to fit larger/smaller flasks.
More of a visual than a structural design. These gates help in identifying work area limits where some parts need to be in motion. In the picture they are used to delimit maintenance access to a mass spectrometer in addition to preventing…
Fixed to the wall by glue or double sided tape. Inner diameter is 6.5 cm. In the picture, the design is used to mount an air filter/nitrogen purifier for LC-MS.
Sample holder for photoreactors or UV chambers. Takes NMR and test tubes (inner diameter: 1.6 cm). Two base designs.
Emboss the provided blank die with your design or text, then glue it to the stamp handle. 1.8 mm high text worked for me. If you create your own die, remember to mirror it before printing. The ones provided here are already mirrored. Use…
Vented sample tray for photoreactor or UV chamber. Fits over the cooling fan and provides a flat surface for samples.
Box used for storing “organ on chip” chips in the freezer/refrigerator after staining. Small design for easy storage or to be placed in door shelves. One box fits six (20 x 38 mm) chips. Print box with supports. 3 sizes available, in case…
For alternative designs, check my other models: https://www.printables.com/@SergeNader_501750/collections/3281639
Easy storage of 1 or 3 print cores.
This will help you root your seed in water until it is ready to be planted in soil. Simply place your seed and this holder in water to promote root development. Do not fully submerge the seed. A small root is sufficient for planting in…
4 inch pipe inserts. In this particular case, they were used to block light from entering a ventilation duct.
The two version are for the same holder but with different back panel sizes.
It's simple, it just takes time! This design resembles a vertical sun dial that can face East, West or South. Use it as a fixed tool to trace the movement of the sun. Grab a paper (or equivalent) and trace the shadow cast by the indicator…
For alternative designs, check my other models: https://www.printables.com/@SergeNader_501750/collections/3281639 For a "blank" pot with drainage, see: https://www.printables.com/model/1643399-pot-with-drainage-plain
Skirt and inner mount for bell jar. In the pictures the skirt design helped in shielding the base of a vented bell jar from fume hood air flow. The inner mounts were glued to the glass so that a tube can be threaded. This design was used…
Use stiff material like Polycarbonate, Tough PLA or PET-CF. The model takes m5 screws or smaller sizes, you can find the ones I used here . Make sure they are at least 35 mm tall. For an alternative press design, check this one:…
Stencil for squash racquets. Fits most frame sizes and brands. The design includes 2 mm notches on the sides of the stencil. Feel free to cut them off in order to center, or fit, the stencil to the frame of your racquet. I have included a…
Used for a "soda bottle magnetometer", to monitor Earth's magnetic field variations (i.e. geomagnetic storms). Glue this piece to a magnet (5 cm) in order to easily suspend it. Here, epoxy glue was used. Details on how to build your own…
Use this model as a blank design to which you can add more surface features. For alternative designs, check my other models: https://www.printables.com/@SergeNader_501750/collections/3281639
Keeps things clean and tidy. Inner storage space is 20 x 7 cm. For the print core storage boxes, please follow this link: https://www.printables.com/model/936474-ultimaker-s7-print-core-storage-tray
Use stiff material like Polycarbonate, Tough PLA or PET-CF. The model takes m5 screws or smaller sizes, you can find the ones I used here . Make sure they are at least 35 mm tall. For a more traditional press design, check this one:…
I needed a switch cover to prevent accidentally hitting it. One version has the switch fully covered, while the other offers limited access for flexibility. In addition, I have included a child/pet proof version and a plain light switch…
The racket prints separately, you can find it here: https://www.printables.com/model/912783-squash-racket-teardrop-or-open-throat Pressure fit or glue to the trophy. There's a slot for it at knee level. If you find the trophy to be too…
These are all currently available results.
