Counting matching models…
Easy to print Paw Patrol Tags. These tags are roughly 36mm wide and 50mm tall. They have some dimension to them which would allow either for easy painting or a color swap during printing.
Updated in 2025. I received a request for a modified version of the powder cup. 20mm tall, dual spouts and no notch. There is a revised version of this cup because after I got around to printing it, I found the overhangs didn't print…
I decided to combined a few of my published models. Now you can find all the same fun stencils and styluses in the same place! Our kids Boogie Boards came with some neat stencils (a lion and a butterfly). Unfortunately with them being…
Update I thought I could increase the airflow a bit more, allowing it to focus even better by cutting out a bit more material. There are two additional versions. One with a crescent cutout and the other with more of a 'ramp'. Every little…
There are two variations to this carabiner. One has a simple chamfered edge and then other is ‘ribbed’. The ribbed version will require supports to print. The gate is compatible with both carabiners. These are obviously not designed to be…
After upgrading my CR10s Pro v1/v2's to the Microswiss all-metal hotend, I've struggled to find fan ducts that directed air flow properly. Most fan ducts that I've found have had four issues. 1 - They don't direct air low enough. 2 - The…
Those pesky drips from water coolers can be really annoying, especially when the mess is indoors. I designed this ‘bib’ at the request of my wife. I've printed it in TPU, PETG and PLA. It will print in all three OK, but I've found the…
My wife was looking for a simple container to replace an existing makeup brush holder. The old holder was tapered toward the top, making it difficult to hold too many brushes. This is just a simple, even dimensioned container. Printed in…
Update I've added a not quite exact copy of a Glitter Doll shovel as well. It can also be printed without supports. A copy of a Glitter Doll bucket.. Supports are required for the bucket itself. I would recommend printing the handle in a…
Printed in PETG to better withstand high summer temperatures in a car. This cup fits great in the Diono car seat and oscillates well, but doesn't hold its position like the OEM. It's more free floating. It was printed with the base of the…
I was unable to find a single Gabbwatch stand stl out on the web, so I created my own. It snuggly fits the Gabbwatch charging block and then you wrap the charging cable around the base and feed it through the groove on the bottom before…
This is a 'short throw' hummingbird feeder hanger designed to be attached to the outside of a window. We used command hook adhesive tape. Printed in PETG for better resistance to the elements. Print Settings Rafts: No Supports: No…
My father-in-law asked me to make a crosier for a Saint Nicholas costume for a Christmas event. When I couldn't find one, I took a stab at it. Designed in Fusion 360, this is my first more ‘organic’ model. Designed to fit a 23mm dowel. I…
Update I've added a ‘v2’ model of the top that requires absolutely no glue for assembly. Instead the dome and the shaft are threaded. I printed it at .16mm layer height and the threads work well. Both the top and the bottom of the shaft…
This is my variation of the Pull Copter. It functions similarly to other Pull Copters available for printing, but with one important difference that I haven't seen on any I've seen yet. Instead of being driven by a gear and an…
*Nothing like a day one patch! After intermixing an older iteration with my latest version, I realized the foot design of the older model worked even better (with the new ears) than what I had published. So, the ‘v2’ versions have this…
Update Designed a 'shelf bumper' that clips on to the risers, no glue or screws required. This allows you to add a 1/4" by up to 1" board to the shelves to protect items from falling off. I call these my 'because I can' shelves and you'll…
Valance clip for a travel trailer. Print Settings Resolution: .2 Infill: 100% Category: Replacement Parts
My parents Forest River Travel Trailer's screen door latch was broken last year (probably by my kids). The dealer informed them that the part was discontinued. So, I went to work creating a new paddle latch. There are two versions. They…
A Wyzecam corner mount. The Wyzecam slides in from the top, so be careful not to mount it too close the the ceiling. Feed the cable 'up and over' the top, and run it through the cable access hole behind. The mount will need some sort of…
This is replacement ‘two fork’ key for a child's jewelry box. I've found it to work quite well, even with PLA. I've printed this using a .6mm nozzle, which I was concerned might compromise the forks since it minimizes the number of walls…
Replacement Fisher Price Horse Harness/Bridle. You can pick up the originals on Ebay for $18+ a piece or print these. They aren't exact, but pretty dang close. I've printed in PETG as well as PLA+ in the shown orientation at 100% infill.…
My old headlamp stopped working. The band was still good so I decided to design a clip that would allow me to mount Gearlight's small M3 flashlight. This clip doesn't allow for any oscillation, but it does work quite well for what it is.…
Fits on the original fire sticks (shown in picture). I printed in TPU with 3 walls and no infill. Also did a fuzzy skin to make it look a little more lumpy.
This is another ‘because I could’ project. There are a lot quicker ways to accomplish what I was trying to do, but I have 3D printers AND I like things to look nice and neat too. So, I present to you my ‘Between Stud Shelf Brackets’. Each…
Purchased a ‘MagSafe’ charger from Bestbuy and found it's not exactly the same size as the Apple OEM version. So, I had to create my own charger puck. This charger seems to be a bit wider than Apple's. Printed in TPU and it works great.…
Designed to snuggly fit the wyzecam flat usb cables.
I created the original SPAM star as a Christmas neighbor gift gag. After sharing with my manager, he requested one for his friend who works for Hormel and then he asked for another to send to the SPAM Museum. Designed to fit an actual…
HocusPocus wreath decoration. In my opinion it looks better in orange, but I couldn't find a picture of our orange version and our Halloween stuff is packed away until October.
*I'd recommend you check out my SPAM Star 2.0 in addition to this model. I personally see it as an improvement over this one. The Official SPAM Museum SPAM Star by ICBB | Download free STL model | Printables.com For your SPAM loving…
These are all currently available results.
