Counting matching models…
An insert for Festool Systainer cases that ensures a flat/even bottom of the box. It can be printed either in 6 parts (Prusa Mini or comparable printers) or 4 parts (Prusa MKx). These parts can be attached to each other using M3…
HINT Print this vertically like the orientation in my wall-mounted photos. This will ensure optimum strength. If you print it with the flat side down - it will be much more prone to breaking. A holder for Maglite D-Cells that is strong…
A Gridfinity 3x3 bottom compatible disk holder for hand operated crystal presses as frequently included in cheap watchmaking sets. It has disk sizes 46/44mm down to 20/18mm and one cut-out disk.
Print this vertically like the orientation in my wall-mounted photos. This will ensure optimum strength. If you print it with the flat side down - it will be much more prone to breaking. A holder for Maglite D-Cells that is strong enough…
Gridfinity 4x1 Holder for Bergeon 6767 and two inserts Fully Gridfinity compatible including holes 2HU (14mm) plus 4.4mm according to Gridfinity standards I updated the model to be fully Gridfinity compliant, thinner, and have another…
2x1 Gridfinity holder for a cheap screw operated watch case opening tool 3HU (21mm) + top lip (4.4mm) Fully Gridfinity compliant
2x2 Gridfinity holder for the movement cushion N5395-55. 5 Gridfinity HU (35mm) plus 4.4mm Fully Gridfinity compliant
Gridfinity 1x1 holder for Bergeon 1458-A-12 watchmakers Lupe (12x) 6HU (42mm) +4.4mm Lip Fully stackable, fully Gridfinity compliant
Gridfinity Holder for Bergeon 30081-S screwdriver base 3HU (21mm) + 4.4mm Fully Gridfinity compatible Obviously, you can't stack anything on it if the screwdriver base is in there Fits any 68mm cylinder that is 13mm hight
7HU Gridfinity holder for the Lingui 3400 crystal lift. This is the most common “cheap" crystal lift so if you bought it for around 20€/$ - this is most likely the correct one even if the name doesn't match.
A Gridfinity 1x1 holder for the Bergeon 2611-TN No 2 ½ 4x lupe. It comes with a nice 4x in the bottom so you can see what you are looking at even without taking it out. 100% Gridfinity compatible
A 3 HU (2,1mm) gridfinity holder for a cheap hands-puller used in watchmaking. The top of the model does not conform to the official gridfinity standard but can be used for stacking in a pinch.
A simple gridfinity holder (4HU 3x2) for the cheap oil holding pans from RUIHUA used in watchmaking, model number No 30180-A-B.
Summary Three simple holders if you want to attach a RaspberryPi Camera Module 3 in any corner so it observes the room. The camera module 3 is attached using four little screws (hole diameter 2mm) so screws of around 5mm depth and 2.5mm…
A Gridfinity 1x2 holder for the Bergeon 7230 and the two plastic caps delivered with it out of the box. 5 HU (35mm) plus 4.4mm for top lip Stack other modules on top loose fit - easily grab your tool no bottom holes for magnets. If you…
The pin-pushing tool Bergeon No 7230 comes with two plates that help align the band of the watch with the pusher. For an unknown reason, one of these plates stamped with J G broke in storage without any mechanical stress on it. So I…
If you want to keep your lens adjustment tool for the raspberry pi close-by, this little holder can do it for you! It can be screwed down using a countersunk screw and should provide a snug fit. I recommend printing at 0.10mm to ensure a…
These are all currently available results.
