Counting matching models…
Remix of the both existing models. The grenade model comes from here https://www.printables.com/model/483438-complaint-department-please-take-a-number The number tag comes from here…
A build plate holder for the core one. Slots are 1.5mm wide. To fix it, use double sided adhesive tape.
A slider for the z-axis for the Neje 3 Laser. You need 2 M6 nuts, a M6 threaded rod and 3 pcs M3 melting nuts.
A simple holder for your Bosch Professional jigsaw GST 12V-70.
Looks like a big screw with a nut on it, but there is a secret compartment hidden inside. Easy to print. When printed 1:1 it has a diameter of 68mm.
Nuka Cola Bottle with hidden compartment. Its a remix of an existing model.
A stand for the apple magsafe charger. You have to fix the magsafe charger with double adhesive tape or glue or whatever.
Its a wallmount or holder for the Ryobi 4V Cordless Cutter RCT4-120G. There are 2 versions: Screw mount version. Just mount it with 2 screws on the wall. Skadis verison, to mount it on the ikea skadis board. For the skadis version you…
Its a baseplate for the ZK-FX35 load tester. I did not like the Micro-USB-port so I installed a USB-C-connector (for power supply). The USB-C-connector is from aliexpress and you have to solder plus and minus onto the board (near the…
A wallmount for the Marshall Minor IV headphone case. You can use a screw or double sided adhesive tape to mount it on a flat surface. At the bottom there is an opening for the USB-C chraging port.
With this adapter you can mount a charcoal filter to the exhaust of the core one. Fits for 10" charcoal filters which are usually used for water filtration. The bottom cup is glued with double adhesive tape to the printer. Not to fix it,…
Because I have had pretty high temperatures at my mcu, I designed this cover to install an 80mm fan, to cool the electronic board of the core one. I use a sunon 80mm fan, 24V version with a 180 Ohm resistor to reduce fan noise.
A WD40 bottle with a hidden compartment. You can unscrew the top to open it. I printed it with the mmu3 on my core one. The resolution with the 0,4mm nozzle is not high enough, so the white text is not completely clear, but its readable.
A picture frame for wall mount of a AMD Athlon 64 CPU. It was inspired by https://www.thingiverse.com/thing:4576444/files
This is a housing for a stepdown converter. 12V Input to 5V Output to drive a Raspberry Pi 4 and a 5" LCD You can mount the housing with 2 screws. Inside dimensions are 64x28x15mm.
A simple handle to control the airvent on the Prusa Core One. It has an “open/close” text on the front and two arrows to show the direction. Its also makes it easier to open the top window.
Its a soldering station which is powered by a 18V battery (Bosch professional) or an external power supply (XT60). You need. soldering station https://de.aliexpress.com/item/1005010233269391.html battery adapter…
A wall mount for torx screw drivers. Fits to https://www.amazon.de/INBUS%C2%AE-Schraubendreher-TX6-TX30-HybridTouch-GrayTip/dp/B0BBSBQ18X You just have to mount it on the wall with 2 countersunk screws. I printed it with the mmu, to get…
A wall mount for the Fnirsi HS-01 soldering iron, with a small spool for solder. The spool consists of two pieces which have to be glued together. The wall mount can be mounted with counter sunk screws or double sided adhesive tape.
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
A cover for the deepcool LT 720 water pump with the commodore logo. I printed the commodore symbol with transparent PLA. Attention: You have to use the original bracket, so you have to disassemble the original cover. There are 2 versions…
Its a controlunit with 4 switches to control addons on my 3D printer. Equipped with 4 iluminated button switches i can switch: Lights Raspberry Pi Chamber heater Filtersystem U can install button switches with a diameter of 12mm.
Spoolholder caps for the core one with rock band logos.
A wall mount for the Bosch GDR 120-LI impact wrench. There are 2 different models. A straight one and an angled one where the impact wrench is angled 7° for easier removal. At the front there is an imprint of the Bosch logo, which can be…
A wall mount for the Bosch GSR 12V-15 cordless drill. Its angled 7° for an easier removal. At the front there is an imprint of the Bosch logo, which can be easily colored with the slicer.
A wall mount for the Bosch GSR 18V-60 C cordless drill. Its angled 7° for an easier removal. At the front there is an imprint of the Bosch logo, which can be easily colored with the slicer.
A removeable sleeve for the emsa beYou drinking bottle. Just remove the original sleeve and place this one
These are all currently available results.
