Counting matching models…
Adapt Wraith Stealth or Spire with a 120mm fan. Use the existing hardware to mount the adapter to the cooler. To mount the fan to the adapter use one of the following. First one is preferred. Press in 4X hex M4 nuts to the adapter. Secure…
Adapter to install Voron V0 accelerometer onto Stealthburner fan shroud. Accelerometer is mounted with M3x6mm bolt self-tapped into the plastic. To attach to Stealthburner, use two 20mm longer bolt than the original.
This adapter is to direct part of the 120mm fan air flow to allow for active cooling for RAMs. You will need 4x M3x5x4 threaded heat inserts so you can thread the fan directly to the adapter. You will need 2X CPU heatsink fan clips…
This adapter is to direct part of the 120mm fan air flow to allow for active cooling for RAMs. You will need 4x M3x5x4 threaded heat inserts so you can thread the fan directly to the adapter. The adapter itself is a sliding fit held by…
Press on 6X M4 nuts and bolt the fans to the shroud. Two of the nuts you can't really get to. Plenty secure with just 3 bolts per fan. Use double sided tape to join gpu and shroud. Best way is to apply tape to the GPU first but don't…
I wanted to try the new Voron V0.2 fan duct to try improving the cooling performance when printing PLA. As it turns out that would require reprinting all the extruder parts plus redoing the XY belts with the new gantry. I combine the two…
These are all currently available results.
