Counting matching models…
Printed right from the file, you can fit a 2.5" pot into the planter if you like to double up like I do, or you'll have the entire cavity of the Oddish with a 2.5" diameter opening for your plant. Print with or without drainage holes.…
Thought it would be helpful to have a version with a drain hole in case you don't want to have sitting water under the plant with the insert. This would require a tray under the kodama to prevent messes when watering your plant.
Simply removed the bottom piece that held the gluesticks in place so the pliers can sit down in the holder. Probably will work for other longer tools with handles. Printed in PLA.
We use our storage bins to hold towels for the dogs and needed somewhere to hang towels if they're wet. This is a modified version of TJDesign's towel hook. Printed in FormFutura's Space Grey PLA and holding one of the biggest/heaviest…
This spreading board is shaped so that the insect will appear in flight. The bolt can be loosened to allow the two sides to slide and tightened to snuggly hold the insect in place. The butterfly in the picture is for demonstrative…
This spreading board is a standard flat board. The bolt can be loosened to allow the two sides to slide and tightened to snuggly hold the insect in place. Newer versions are printed without supports. Printed on 256x256 in PLA with the…
These fit 2" net cups. I needed the option to start just one or two cups at a time but didn't want to leave spots empty in the four cup version. Printing one of these two variations will use less water than the four cup version when you…
This will print in two pieces that can be glued together. The width of the grooves are 1/8", 2/8", 3/8", 4/8", and 5/8". Each is 22mm deep to accommodate any standard insect pins. They're 250mm long and 145mm and 155mm wide. The right…
Loved rosdj's design but couldn't think of a good place to put it because all my shelf space is for plants. So I removed the base and extended the spike to create a little plant decoration. This could be scaled down for cupcakes or…
Printed in PLA for indoor plants, but could be printed in PETG for outdoor plants. Lots of places to weave vines through. Made this from playing around with the shapes in Tinkercad.
Fechner lines will create bands when moving and our brains will interpret the bands as different colors depending on the speed and lighting on the disc. This 45 adapter will appear to have bands around it when spun or possibly two…
This box will hold 66 amiibo coins, closes nicely, seems very tough. I have also used this to hold quarters.
I printed this in PLA to use with indoor plants, but I suppose it could be printed in PETG or something more weather resistant. The stake part may need to be longer to offer more support for taller plants. This is based on an image I took…
Roy: Moss, I don't like to be negative about it, but everything you invent is worthless. Moss: Ah, well, prepare to put mustard on those words, for you will soon be consuming them along with this slice of humble pie that comes direct from…
These are all currently available results.
