Counting matching models…
Membrane For the membrane, you can use a piece of thin plastic (for example, from a shopping bag) or wax paper. The choice of the membrane material significantly affects the sound of the Kazoo. Really thin membranes will make the sound…
I've had trouble with soldering some small PCBs, so I designed a PCB holder in FreeCAD with parts I had at hand. To build one yourself, you’ll need the following hardware: One 2020 aluminium extrusion profile with tapped ends One 8mm OD,…
I needed a shorter mounting arm for my satnav, so I designed one (69.4mm overall length). Extensively tested on some rather bumpy roads in Thailand. No guarantee, though. Best printed with quite a few perimeters and relatively high…
The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers
A display cover for the MKS Mini 12864 v3 to be mounted to 20xx aluminium extrusion profiles. Requires 2x M5x10 bolts + nuts and 4x M3x6 screws. Edit 12.01.2022: I've accidentally uploaded an older version of the STL file, where the hole…
I wanted to make some scribe lines on parts that get scratched pretty easily, so I designed and printed this 'machinist square'. I keep this one on my desktop and the real deal in the workshop. :) Dimensions: 50mm x 75mm x 15mm Edit…
I'm on the home stretch of building a custom 3d-printer. I wanted (needed :)) to clean up the wiring mess and therefore designed these customizable cable ducts. Category: Electronics
Well, I guess the purpose of this clip is obvious: comfortably carry stuff in your pocket. * Edit 19.12.17: Added a second, more angular version. Not tested. * Edit 21.12.17: Added a third version that should be a little easier to print.…
I needed to remove the tyre from the rim of my NSR50 project and didn't want to damage it any more than it already is, so I designed these rim protectors. Note: The NSR's rims are pretty skinny, so I've included a small test piece so that…
The waist belt clip on my Held "Adventure" backpack broke, so I printed a replacement part. How I Designed This Step 1: Took a picture of the broken clip Step 2: Took measurements and created the basic shape in Affinity Designer Step 3:…
This is an accessory for the storage compartment of the center console of the Hyundai i10 (AC3 series). The default slot depth is 15mm. If your phone is significantly thinner or thicker, you can modify the depth of that slot in the “vars”…
My bicycle "needed" some new end caps for the handlebar, so I came up with these. — This is my first try at designing a customizable thing, so feedback is welcome! :) Note: I would recommend printing them in PETG or similar temperature…
There is not enough space to stick a regular GoPro mount onto the chin piece of an X-lite X-603, so I designed my own that also matches the three dimensional contour of the helmet. It probably is a good idea to print this with a brim.…
I've designed this adapter specifically for my bicycle (Cube Nuroad EX) and water bottle cages (Elite Prism). I've included a technical drawing as PDF file, where you can check the dimensions to see if it would also fit your bike. (The…
Please check the hole spacing in the drawing! If your hard drive has a different spacing, the FreeCAD source file is included. You need to remove two standoffs, the screw between them, and the internal speaker. Attach the mount to the…
I've bought an E3D Revo Six for my custom bear. To get easier access to the nozzle for changing, I've printed the Delta-P hotend cover and fan duct, after tweaking them to my liking (thanks a lot for sharing step files, teookie!). Changes…
I've added some new stickers to the wheels of my motorcycle. Since the edges of the rims are fairly rounded, I've designed an applicator that handles this profile a lot better than those universal ones you get with the stickers. This…
Since I've come across some camera lenses with missing caps, I've designed a #parametric model in #FreeCAD . Just enter the filter thread size (and optionally thread pitch, spring width/thickness, and some other variables), and voilà:…
I was looking for a way to attach my Xiaomi YI (with the "standard" GoPro-style clip ) to my backpack. — This is what I came up with. No other parts (velcro, screws, etc.) are needed and the whole construction is - at least in my opinion…
Everybody who owns one knows how annoying cleaning a Mighty Mouse is. The only way to properly get it working again (for a longer period) is to disassemble it and to clean the internals of the mouse ball "module". That unfortunately means…
The fork seal of the left hand fork leg on my CRF250L was leaking and needed to be replaced. I bought a fork seal driver, but the gap between the tool and the fork tube was so small, that I was worried I might scar the surface.…
I was tired of fiddling with rubber bands when storing my ROK straps away, so I remixed MasterFX' bag clips for a more convenient solution. :) Inner dimensions: Width: 30mm Height: 25mm Category: Sport & Outdoors
To reduce the chances of forgetting the spare Petzl Core in the pocket of my running shorts and having it ultimately end up in the washing machine, I've designed this little case that can be attached to all sorts of things – for example,…
As with all print-in-place models, your printer needs to be calibrated quite well. In addition, it needs to be able to reliably bridge a 17.23mm gap. FreeCAD source file and .step file included.
For my taste the CBR's factory indicators are far to beefy, so I replaced them with some Barracuda Mini Vipers. But that is actually easier said than done, given the fact that there are no indicator adapters available that wouldn't leave…
What This generator can be used to create 3D-printable frame structures for all kinds of things, like electronics boxes (perhaps even a frame for a small 3D printer), Mario cubes, etc. :) (You can also create other rectangular cuboids,…
I'm on and off tinkering on my NSR50 project bike. I want it to be as stock as possible, but original carburetors are surprisingly hard to come by (or ridiculously expensive), so as a temporary solution I designed this custom spacer to…
Another one of those models that are so specific that it probably will be of little to no use to someone else. :) (* I have designed this adapter to fit my Huawei P8 in its outdoor case. But it is easily customizable to a certain degree.)…
This titanium cup (micro pot?) is the latest addition to my camping gear. To prevent me from losing the lid, I've designed a transport clip. Unfortunately the Customizer is having an issue with my OpenSCAD file and refuses to render a…
While working on the engine of my Honda CX500, I've thought it would be nice to have a more convenient way to look something up on the internet or to follow the repair manual. You need three tubes/rods with an outer diameter of 8mm to…
This mount allows the attachment of an Aukey PC-W3S (and possibly PC-W3 (not tested!)) webcam to 20xx profiles. Print the ¼" screw with a low layer height. I've used 0.1mm. Don't overtighten the screw mentioned! The cutouts on the sides…
There's not much to say really. It's an adapter to attach a action cam with GoPro-style mount to a Sigma Roadster bike light mount. Fusion 360 source file included. Edit: Actually, there is something to say: Since the Sigma's rubber…
To create a customized version of this model, simply open the .scad file in OpenSCAD and either adjust the parameters in the code or use the customizer. OpenSCAD will generate a single STL file for all gauges and the lower and upper…
The mount of my Garmin Edge 200 sat at an weird angle because of the taper of my handlebar. It also sat so low, that I hit the stem whenever I tried to attach the satnav to it, so I designed this spacer. The wider part of the taper is…
About I designed these bumpers to prevent further nose-/tail-damage on my longboard. They are ment to fit Airflow Skateboards' "Around the World" deck. As mentioned, the nose and tail on my board have already suffered from a little wear,…
DAS FILAMENT just released part2 v2 of their Little MasterSpool , which adds holes to attach the inner end of the filament spool to and thereby lock both halves together. I have already printed version one of the Little MasterSpool and…
I recently purchased a used film camera, a Yashica FX-3 Super 2000. The camera arrived in excellent condition, and the lens also appeared to be in good shape at first glance. However, upon looking through the viewfinder, I noticed that…
A stand and funnel extension for a two cup Bialetti Moka Express – makes filling the funnel a bit easier.
A z-axis mount for NEMA 14 stepper motors and a 608zz bearing for the threaded rod. OpenSCAD files included, so you should be able to adapt it relatively easy to other stepper or bearing sizes. Edit: The MicroCube's default bed carriage…
I've bought a new bicycle lock and the only position left for its mount, where it wouldn't interfere with bags or other accessories, was on the downtube, right behind the front wheel. And to protect the code mechanism from flying dirt,…
Since I don't have the matching GoPro adapter to attach my bicycle headlight to the new "cockpit", I designed this simple adapter that screws to the underside of the bike computer mount, similar to the included action-cam adapter. It…
I received my order of filament refills from DAS FILAMENT today and wanted to add the info-sticker they provide with each coil to the Little MasterSpools I've already printed. This is my solution. To attach this addon to a Little…
A stand and funnel extension for La Mokina – makes filling the funnel a bit easier.
Why square when you can have round? The film reminder consists of two parts that need to be glued together. If your paracord is on the thicker side, it's easier to first thread both ends through the top part, then the bottom part, and…
These are all currently available results.
