Counting matching models…
I have reverse engineered this in fusion 360. wow its so complicated to do spirals with a custom profile, that was much easier in Inventor back then… Also “shell” did not work on this geometry, so more mess. I did some small changes that…
This dust shoe is made for High-Z CNC machines from CNC Step using Kress / AMB motors. for 100mm hoses single handedly removable brush (no tools needed) easy installation, no need to remove for tool change No reduction of cnc working…
This spoke tension meter is based on a design from DT swiss. Note: as long as this tool is not calibrated, only comparison measurements can be done, no absolute spoke tension is measured. Features: Set screw allows to adapt the spring…
To be used with a common pencil sharpener with size 26mm x 11mm x 13.5mm. Fusion 360 file is included. print container 1% larger
2x 60mm Fan for 110-220V AC (20mm thick) 2x M12x1.5 cable strain relief cable with 2 strands to connect cylinder head fan 4x M4x30 with hex socket to replace cyclinder head screws 8x M4x25 to mount fans 8x M4x10 for mounting motor fan…
What to do with the mops while they dry, it takes so long, and they are always in the way. Use some double sided tape to attach it to a wall at a convenient location and always have a dry mop ready.
Upgrades your old Ultimaker Original to direct drive using an Orbiter extruder. I use the 2.85mm version since I am also using a second printer from Ultimaker and want to use the same filament rolls for both. With this upgrade I can print…
Correspond tension force with the measured value of your tension meter I used aluminum profiles 23.5mmx 23.5mm which are easy to get by where I am. I set my tension meter to have 1mm of measurement value at 100kg. See attached fusion360…
A mower needs to have its bottom cleaned from time to time, won't do it by itself. But the Ecovacs A3000 Lidar has it's sensitive main sensor on top and you really dont want to lay it with all its weight on that glass dome. This jig is…
So after one year having this in operation, it seems to last just fine so here we go: print the "WheelHubRepair" piece, PLA should work fine you need two self tapping screws , length about 25-30mm in length, 3mm diameter. And a method to…
Picked up that soap box car for 25 at local thrift store. Kinda nice, but unusable steering and awful brakes. So I made this fancy new steering, now it only has awful brakes. Uses plywood and 3D printed parts and some screws. the ball…
Using three cable ties, mounts an ESX Quantum QS-TWO-ISO amplifier in a Nissan Leaf (ZE1-2018). It uses the space above the glove box. Note: You also need an adapter cable for the ISO cable that fits the Nissan head unit, like MUSWAY MPK…
BSP ¾ Thread with pitch of 14 windings per inch Fits the Klauenkupplung “GEKA” with ¾ inch outer thread
After decades in use, the plastic pegs inserted into the spring feet of the chair are starting to fail. I printed this part in tough PLA to replace the broken ones.
Adds disc brakes to the soap box car. Take a look at the fusion360 files for details. Use standard bicycle cable brake wires. 12 1/2 inch wheels are used, you can find them at your favourite china shop. For the seat, i used a sliding…
These are all currently available results.
