Counting matching models…
3rd of my fidget cube remixes: https://www.printables.com/de/model/109928-fidget-cube https://www.printables.com/de/model/109913-fidget-cube Notes: File with "Gap0.4" will fit for normal printers. High quality printers can print the…
Printed with 0.2 layers without support. Raft or brim may be helpful. Added 2 new stls one without scars and one with thinner scars. Easier print with these 2 models, they have a bigger footprint.
5 different hooks as examples of this parametric model. In the scad file you can change the size and position of the hook and make your own hook. Added the “hex plug library.scad” to the files.
Mixed two of my Fidget Cubes File with "_0.4" will fit for normal printers. High quality printers can print the "_0.3" file.
This is a remix from: Kobayashi Fidget Cube (Infinity Cube, parametric) https://www.thingiverse.com/thing:2849422 Notes: Files with "gap_0.4" will fit for normal printers. High quality printers can print the "gap_0.3" files. Cubes with…
Part needs support. stl's with 12mm and 14mm gap between hooks and with two different cylinder length. If you need other sizes - write me.
An other fidget cube remix - for more sensory experience. https://www.printables.com/de/model/694119-fidget-cube https://www.printables.com/de/model/109928-fidget-cube https://www.printables.com/de/model/109913-fidget-cube File with…
Lampshade for floor lamps, print in spiral vase mode. Printed with 0.6 nozzle, 0.3 layer height and 103% extrusion
Holder for pliers
Model uses layer specific setting of prusa slicer, prints sequential. Thanks to animatorgeek for his fine model.
Printed in spiral vase mode, 0.3 layer height, used 5% overextrusion. Will all be set if you use the 3mf files with prusaslicer, sequential in version 2.4 If you need stl files please tell me. The sequential files will print one vase…
You can print both vase parts with BatterieBox2xAAA-Body_0.3mm_PLA_MK3S_14m.gcode sequential. or create you own .gcode with BatterieBox2xAAA-Body.3mf. Or print the .stl files in spiral vase mode (one after the other) with 0.3 mm layer…
I use the filler for years and now i needed a matching one for my MK3.9 Spool holder with cliped filament guide. Guide can be mounted in 3 different positions. Fits on Prusa Mk3 and Mk2 too. Roller needs support. The printing area is free…
PLA may break after a while, PET-G is a better choice
Reframe Unusual Interlocking puzzle by Kohfuh Satoh Assemble five pieces inside a 5x5x5 frame. (not so easy) The puzzle is modeled to precise tolerances. It should not be necessary to use force or bend the plastic in order to assemble the…
If you open this projectfile with prusaslicer (open→Project), then you get the changes in model - after slicing.
Remix of "Meeple builder for Santorini" from Guille Mytho for the "Pocket Santorini" from MioPrint
Reframe Interlocking puzzle by Kohfuh Satoh Assemble five pieces inside a 5x5x5 frame. (easy) The puzzle is modeled to precise tolerances. It should not be necessary to use force or bend the plastic in order to assemble the puzzle. If you…
For printing the magnet frog you need to slice the 3mf file with prusa slicer. A 10x3 mm round magnet fits here. The ChubbyFrog is an easy print
Thanks to robo https://www.thingiverse.com/robo/designs i got the scad file and could remix it. Removed the rounded edges on the wall. The tolerance between plate an frame may be tight, scale the frame bigger.
Just 2 cylinder created in slicer with different layer parameter - no stl needed. Sequential print can be switched off - this is not a vase mode. Printed with 0.3 mm layer height.
Playground: print region of top surface with minimal layer height, I used 0.07, so spinning top got minimal steps Works also fine when ground is not flat, or in your hand Put pin into spinnig top, resize it when needed
Reframe Diabolical Interlocking puzzle by Kohfuh Satoh Assemble five pieces inside a 5x5x5 frame. The puzzle is modeled to precise tolerances. It should not be necessary to use force or bend the plastic in order to assemble the puzzle. If…
A remix of my 1st sensory fidget cube, both can be used for play with putty or play dough
2 magnets 6x3mm and 2 steel balls 5.5mm can be used. With layer height 0.2 i made 2 "color changes", the 1st for enter the magnets at 4.2mm the 2nd at 4.4 for changing the color. Be careful that the magnets are totally inside the holes,…
Two sizes, needs support. Printed with TPU. Photo shows the compact version.
Place the Holo top upside down into the ring and turn it, turn around on the table or use a string wind it around the rod, put the ring over it and pull the string.
Remix with parameter saturn and jupiter in 66% size
Replacement of foot for Ortlieb Office Bag foot -- Ersatzfuß für Ortlieb Office Bag
Remix with cutom parameter size 66%
These are all currently available results.
