Counting matching models…
Simple to print. Two different tolerance available for mounting brackets. If brackets are tight to insert heat Voronoi shelf using hair dryer/heat gun and insert the mounts, this gives a tight and rigid connection. Refer images for best…
Lithophane: Layer height: 0.12mm Enclosure & lid: Layer height: 0.2mm Used a single strip of 6 LED lights glued to the back of the enclosure. Powered it using a 12V DC adapter, have provided a hole in the back for female DC port. I have…
Remix of ( https://www.printables.com/model/440401-under-desk-drawer-updated )
Easy to print model Print flexi segment as many as required for the arm The solder iron holder can be attached the base using a nut and bolt(M5 to M7 size) To get a proper fit of the arm to stay in place increase the flow rate to about…
Step 1: Print the blue stripes separately. Step 2: Start printing the remaining part Step 3: Just before changing the filament to black for lettering and number, insert the blue stripes printed in Step 1. Step 4: Continue the print in…
The stencil thickness is 0.8 mm but by scaling on z axis to 0.4mm(50%) also works well. There are 3 parts, two for the logo and one for the lines in the ball on the logo. The width of it is 10cm(approx.).
If the tolerances are quite tight, scale the x and y axis to 105%(or any value depending on your preferences) keeping z the same.
Filament change for dual colour can be made by using modify gcode option in Cura and then selecting pause at height to stop printing and change filament colour.
Hexagonal design paper towel holder
For better weight distribution print side dummy with greater infill than main body.
0.2 mm layer height works best for all. Print Flexi attachment segment as many as required.
Assembly: Connect the handle pieces to the main body by the use of connector pegs, use super glue for strong attachment. Then paste the TPU padding on either side.
Print temp - 200C Layer height - 0.12mm (small object, 0.12mm gives more resolution) Turn it sideways and print it with supports for a better print.
Go to → post processing → modify G-code → pause at height Use the above to change filament colour at the right height to get text in different colour Watch tutorials on YouTube for a better explanation on pause at height
No supports required!! Suggested: a timelapse of the print would look amazing.
To print name in different colour(single extruder) go to post processing and select modify g-code, and select pause on height to pause print before lettering and change filament. In the .stl file the model has turned upside down…make sure…
Has a small cavity in the middle to reduce filament usage. I filled it with filament waste to get rattle sound. 15% infill should be fine.
Snowflake tree ornament covered in epoxy resin. Instructions for pouring epoxy: 1) Place the circular ring in a OHP sheet and attach it using glue gun. 2) Make sure the attachment does not leak using water. 3) Pour Epoxy resin and let it…
These are all currently available results.
