Counting matching models…
You can find @ericd545's original design here: https://www.thingiverse.com/thing:3855571 Used PrusaSlicer's organic supports on this print to keep the points nice and pointy. TBH I'm not sure if they're necessary, but I'm very happy with…
Easier to insert into your Honeycomb Storage Wall. If the No-Tabs version is too loose, try a One-Tab version. As always, your mileage may vary. Includes: "Fasteners and parts for attaching hooks and objects" & “Parts for attaching…
No one wants to be left out at karaoke time, including Lucky 13! Based on @DJMac_255353 's Toy Microphone. Colors loosely based on a Shure SM58 with a black stripe for contrast. Brim recommended. Some post processing may be required. My…
Tiny tennis racquet for a sporty Easy 13. Based on @Black_Printer_546175 's racquet design. It's possible to create ‘strings’ with a needle and thread. I tied it off with tiny knots and little dabs of superglue. Super-quick print so if…
skitch23's adorable napkin holders with a flat bottom rather than the ring/feet. I recommend printing one as a test to make sure they fit your napkins and then scaling as needed. Birds in pic are .2, 4 perimeters, 15% infill, ironing on.…
After my old design came loose in the car, I made a screw-top version so that wouldn't happen again. Works with the OG Loops as well my Engages with the Mutes in. Should work for Experience, etc. PETG is almost a necessity. It works much…
4/20/26: Added 5/8" pin/2.4" rack version 12/30/25: Corrected mis-labeled 1/2" pin for 3" rack STL; added new 1/2" pin for 2" rack version 11/27/25: Added 1/2" pin version for 2" CAP Power Tower 11/25/25: Added 3/8" pin version for 2" CAP…
Keeps the blades in their plastic cases to avoid accidentally slicing your fingers open. 5-tab version is basically the original connector design but attached to case flush with the bottom so you can print with no supports. 1-tab version…
This GPS/phone mount slides into the slot for your CD player and locks into place. Should work with any 17mm ball receptor like Garmin, etc. Recommend using PETG, especially if you live somewhere hot. Do not recommend printing all parts…
A smaller, sectioned version of @brett's great Bucket Shelf, one with the decorative hexagons, one without for faster printing. Print in pic is a little rough but you get the idea. Worked perfect for my little brads and screw hooks.
Made a keychain version of ElGato's cool Seventeen logo. Pics are two flavors of silk PLA that I switched on the fly. Thought the big one was too big so scaled it down to 70% for a smaller one. Pen knife for scale.
Very basic cat face with separate ears. No supports necessary. Print the head upside-down. Ears fit into the holes on top, recommend using glue. Snip the little print-assist rail with your snippers.
The bolt in my toilet's handle broke so I needed to replace the whole system. @zzzy's handle, lever, and axle work, but I also needed a new bolt that would work with the existing nut. I modified @BPmakesthings's bolt for that.…
Mount based on @Mondi_1930831's awesome design, with more support brackets to handle to extra weight of the 18V ONE+ HP Brushless Jobsite Hand Vacuum #PBLHV701B. Still works for the ONE+ 18V Cordless Wet/Dry Hand Vacuum #PCL702B though it…
Keep your water bottle off the gross gym floor and stop using benches as water bottle holders. Modeled on a Rogue Fitness wall rack and should work with any 3"x3" rack with 26mm holes. There are spaces for 5mmX2mm magnets in the back but…
Keep your OG Super Glue tidy before you have to throw way a crusty half-used tube. 4x version printed in under an hour on an Ender 3 S1 with Sonic Pad.
Broke a knob off of my washing machine, so I made a new one. Knob: only one version. Photos show print in Printbed white, 197/60. Crown: only one version. Superglue it on. Photos show print in Sunlu Matte Gray 191/60. Posts: For some…
Check out the new screw-top version! https://www.printables.com/model/844317-loop-earplugs-screw-top-lid-case – Original – Remixed jecoffey's awesome design, made it a little thinner and a little shorter, removed the loop and put holes in…
Keep your accessories tidy by mounting them on the wall. Printed in PETG, .24. Used whatever sheetrock screws and anchors I had around the house. Pretty small, nothing special. Separate mount/holder for the hose here:…
Love @Pandamanrjf's HSW precision screwdriver holder, but needed spaces for six screwdrivers. I made versions with the small inserts and with one large one-tabbed insert.
A simple protective cover for the bottom of your Yeti Rambler. Works on the 12oz and the 18oz (pictured). Bottom of the cover is angled, not curved, for better printing. No supports required. Printed in 95A TPU at .2 in about 35 minutes.…
Holster your Ryobi QuickTurn Screwdriver tip-up, tip-down-straight, or tip-down-turned. Includes a spot for whichever bit you're not using. Pics show PolyLite PLA .24 200/60. Peg STL included for convenience, it has not been modified from…
You should probably just buy a security camera that fits with a round junction box. But if you didn't and you want to attach the REOLINK Duo Floodlight Cam to an existing junction box, you can use this adapter to attach it. You'll need…
It's a pain to try to use a coach's whistle that's on a lanyard around your neck if you're wearing hockey gloves. So I made a holder for the whistle that, along with the strap of your choice, will attach it to your glove. Two versions,…
I thought I'd lost the interior part of the outdoor mount for my Eufy Security SoloCam S220 and I searched around for a replacement, to no avail. Ended up finding the missing piece in a pile of leaves, but I decided to design a…
If you're like me and don't have an AMS/MMU and you still want a multi-color maker coin or poker chips, this can help. These are 3mm in height. Take your logo or design or QR code and turn it into a negative, and drop it .5mm into the…
USB Volume Knob based on WPATRICK's design. See photo for slicer orientation. Adds notches to interior of housing to account for alignment pin on rotary encoder Adds 3mm in length to knob to account for longer rotary encoder (as noted in…
Very simple wall mount for the Ryobi Jobsite Vacuum hose attachment. PETG .24. Used a small wall anchor and screw, don't need much, it's not heavy. Wall mounts for the extension and crevasse tool here:…
Did you lose the end cap for you Assault Bike seat slider? I got you covered. Recommend printing in TPU so the corners aren't (as) sharp. Slightly-wider cap should press-fit, and you can also use the tightening screw to lock either one in…
The logo for the Emory University Eagles, in Atlanta, GA, USA. Head-only logo can be printed as-is and used multiple ways. The full logo is split into four layers. It can be height-adjusted for a multi-color print, or make parts/all of it…
Fits a piece of metal 45.2mm X 65.5mm. Snaps in if you pull the case around it a little. Made with Xyltec TPU 95A. The case depth between the metal and the magnet is only .25mm to try to get as strong a hold with the magnet as possible.
I have a bunch of small hard drives - Western Digital My Passport, Seagate Backup Slim Plus, etc. They're not easy to stack, and printing enclosures for them takes too darn long. So I made some small clips that I intended to glue…
Half squash ball anti-vibration feet worked really well on my Ender 3 S1 so I made some for the K2 Pro. These are the squash balls I used. Don't use a Dremel took to split them in half unless you want to be covered in approximately 60…
Otter with netball design by the awesome Shorts84. If you love otters and you love netballs/volleyballs, I have got the clock for you! Clock is a $10 PLUTTIS from Ikea with enough clearance between the white background and the lowest…
It's the Therabody logo. Pretty simple. Have fun!
Important : Split the adapter along the Y axis and place each half face-down for printing (see photo). None of the interior cavities should need supports but a few well-spaced tree supports do help. Made this kit of parts so I could use…
The first time I turned my ViewSonic VP16-OLED to vertical orientation, I almost dropped it because the only thing holding it up is the one slim corner of the stand. So I made a stabilizer for it which also works to bring the viewing…
Turns out my screw-top version can come apart without me noticing. Who knew? So I make a version with magnets. This takes two (2) 5mmX2mm magnets. You will need to pause the print for the outer case right before the layer that prints over…
I bought a Cat Dancer Original Toy and my cat loves it! But my hands don't love the little cardboard roll with which I'm supposed to control it. So I made a handle for it. Print both “TbarSplit” halves (split-side down), then use the…
My plant stand sits on small pebbles so I made some feet for it to help it remain stable. Printed in PETG.
Replacement drip rail plugs in case yours go missing. Plugs in the pics are printed in TPU.
Quick and easy print to replace the strap holder on the Brila 580 Dual Power LED Headlamp. https://www.ustgear.com/lighting/headlamps/brila-580-dual-power-led-headlamp/1156916.html Be careful when you attach it, and when you add the…
Charging adapter for my Amazfit GTR Mini to work with the Anker 335 Wireless Charger (3-in-1 Station). See pics for supports. Used parts from Sykytiskne 's Amazfit T-Rex Pro charging stand and Brandon Marotz 's Anker 335 Pixel Watch 2…
These are all currently available results.
