Counting matching models…
Hole for battery designed to be 18,4mm spacing is 22mm. Model consists of individual pieces that you can separate and use how many fits you. you could also pattern the same model how ever you like. If you want to make 3S6P like me you…
Just slice and print. No supports needed.
I designed this in Fusion360 , Basic cylinder with embossed sketch of three hexagons with lines. This was made into pattern. Design could be printed in vase mode as intended but is you would add negative volume of cylinder on the inside…
I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has…
It uses half inch square ( 12,7mm) and its perfect for 610/3 oil filter , but probably fits most of similar ones with 14 sides , measured across flats 64,5mm. Printed in PETG 100% , If you dont own a half inch socket you can still use…
Uses 2 pieces of ½" hose that pushes into the adapters. They are both fitting into the adapter therefor maximizing the flow and not restricting it like conventional adapters that make the hose to go over them thus making cross section…
I needed to have numbered keys , they all looked alike so need a way to distinguish them. I have them numbered the same way I have locations on map. https://www.youtube.com/watch?v=4gMrWa4Y6eo want more ? here are numberes from 11 to 21:…
Have hard time opening windows that are not in your reach ? Print it and stick it on the the broom handle and you are good to go. Its better when the assembly doesn't move completely free so it holds its position so its easier to operate…
Box clip broke at the pin location where it rotates and others got lost. So created my own. They fit very nice and are strong. For mounting its possible to use 4mm nail or M4 screws. I put a little M4 screw from one side and inserted clip…
Print the two halves of the cleaning net and handle. once you assemble it you can cover the end with printed cap so there is nothing visible. Secure the mesh in between two halves and clip on the clips.
Inspired model from new launch of Prusa CORE ONE which I really liked but was nowhere to download. STEP model was showing some errors, please use the .STL or .3mf file. Step file included for those interested in CFD analysis and so on.…
This design is made for a square hole that is 88x88 mm The hinge is working with two M3 countersink screws ( the screws don't go into the wood), If fits nicely but you can add silicone or glue between the desk and grommet. Included is…
I modified the design here https://www.thingiverse.com/thing:2474245/#comments to make it easier. M10 threaded rods are so easy to get anywhere. Only smooth rod you need is 8mm , You dont need LM8UU because you can use printed one. I use…
Best to print the tree up side down - with Vase mode and 5 bottom layers, this creates a nice feature when you thread in piece of wire or string with tied knot on its end it will nicely stay hidden inside the ornament. If you want to know…
I slightly modified the bearing, I made a little chamfer on the bottom and on the top to make it much easier to use it straight away rather then remove the edge on the bottom. I didnt want to have the chamfer too big becasue I want to use…
100% infill , no supports. best to use PETG
Printed in PLA, need more keychains ? look in my designs. Category: Keychains
I broke my old screw and found drawings online. so I could recreate it . I printed this in ABS just it case it might get hot UPDATE: Michael_G printed this scaled down to 96% of original size and it fitted perfectly. So you can use this…
Simple to print. Protects the floor and unwanted rolling off of your weights. Feel free to use STEP file to modify for your own sets.
I printed everything with PETG of different colors using MK3S with MMU3
This is a cap for steering fuild in hyundai elantra Print Settings Printer Brand: RepRap Printer: Prusai3 Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 25% Category: Automotive
Mitsubishi keychain v2. Lancer in front Mitsubishi hollow out on back. Print Settings Printer Brand: RepRap Printer: Prusa i3 PLus Rafts: No Supports: No Resolution: 0,2 Infill: 20% honeycomb Category: 3D Printing
one or two colors , I used glow in dark top color so they are easy to find.
Polo keychain in PLA . Have more keychains just look in my designs. Category: Keychains
Keychain made from PLA glow in dark Category: Signs & Logos
Polo keychain in PLA glow in the dark. Have more keychains just look in my designs. Category: Keychains
Original design was great but I wanted to make it more strong, where it will be printed on its side (top view is then shape L) wich give it more strengththe way it is going to be mounted. So I rounded and chamfered edges to accomodate…
I designed this to fot standard prusa frame. It fits with led strip on aluminum , you can find those on ebay or banggood . it plugs straight in to the 12V power supply and you can use jsut super glue , the frame will act as a heatsink so…
Print with support from bottom, so you have nice top surface and bottom will never be seen anyway., Provided also STEP file so you can modify the part.
endstop fell out and was lost. had to replace it. Teeth on the original one didnt snap into palce anymore. we used glue before. then it felt out again. Now I designed it with magnets pressed in. they are attracted to the chain, so no glue…
I needed this printer becasue my cabless were short and disnt want to use more space on table so this makes the printer more compact and even better for usage in tight spaces. It even helps with making the signal stronger so you dont get…
These are all currently available results.
