Counting matching models…
Full-face dust masks are very expensive but full-face military surplus masks are quite cheap. So I made adapter from NATO 40mm x 1/7 (gas mask standard thread) to Secura filter connector. Secura is polish local brand of safty equipment.…
This adapter allow to connect hpa tank to chinese asg co2 pistol kwc 941. It's tested and working. Outher thread - M21x1,5 Fill nipple - M10x1 Ptfe gasket - OD 8,8mm x 2,4mm; 3mm thickness (this is crucial part!) Alu tube - OD 6mm x 1mm;…
Its printed in ASA, 0.6 nozzle, 0.4 layer, 3 perimeters, 6mm+ brim, NO cooling, printer inside cardboard “chamber” Ridges on surface are not for looks. They significantly reduce warping. Without them print warped badly and delaminated in…
Beside parts from original battery plate/connector You will need: Soldering flux Solder Soldering iron Super glue Optional nail polish 2 M5x10 screws (check your spare parts bin, I used disc (from disk brake) mounting screws Detailed…
BOM: 2x M3x8 bolts lenght of ⌀40mm(OD)x1mm aluminium pipe. Mine is 170mm ⌀12mm(ID)x3mm rubber o-ring 4x ⌀22mm(ID)x2mm rubber o-ring ⌀10mm shaft/pin/locking pin/sprung cotter pin Its designed for 4,5mm caliber. Holes in baffles are ⌀6,5mm,…
Original plate (probably abs) cracked in many places from chemical damage (wd-40 and brake cleaner) I found it under DCH-009 name on aliexpress. So it may fit many more folding ebikes. Printed in PETg, require supports, 3 walls 20%…
This is JUST a prototype of an adapter that allows You to use disc brakes on old 3-speed sturmey archer internal gear hubs. Final part should be make from steel and welded to hub body. Hub shell is steel so it should'nt be hard to weld it…
P1A6 flashbang dummy. Real life saver when You need to design fb pouch and need something to check proper fitment. I took all dimensions from real used grenade. If you want to make it more realistic, you can add some weight. In real one…
din rail mount for dell wyse 3040 small terminal
I wanted big concrete ball so I made it and in future maybe I made it bigger. For now it's 20kg and 265mm in diameter. Real weight after curing ended up on 19,97kg so pretty close to calculations. For complete mold you need to print wall…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
I get the idea from this forum thread: https://www.hovatek.com/forum/thread-38775.html I used 2x 1000uF/10v electrolitic capacitors in paralel, 10k resistor, 10ohm resistor and piece of copper wire. After soldering everything I covered…
Printed in pla, 100% infill. No support needed. I added source files in step and f3d format if your pipe have very different dimensions. Bearing should sit tight in “bearinghousing” (I pressed mine with woodworking clamps and piece of…
Print 2 cores, cut 2 sides out of any flat and stiff material ie hdf, screw them together with 4 16mm woodscrew per side
Bodyguard+ is so old, that there isn't even mentioned on internet. I don't even know how original magnetic key look like. Printed in ASA, 99 walls, no support. Beside printed part, you will need: - 200mm of 4mm bungee cord. I sew ends…
These are all currently available results.
